| Ape Labs : Connect Grey (17 comments)
Convient pour le contrôle des produits Ape Labs via smartphone, Wireless DMX et KNX- 2x C...(+) Convient pour le contrôle des produits Ape Labs via smartphone, Wireless DMX et KNX- 2x Connect peuvent être connectés en tant que système DMX sans fil en tant qu'émetteur et récepteur- Batterie intégrée avec une autonomie allant jusqu'à 50 heures par charge- Possibilité d'utiliser jusqu'à quatre Connect en parallèle- Convient pour contrôler un maximum de quatre univers DMX- Réalisation de mises à jour du micrologiciel des appareils Ape Labs et du Connect via l'application- Entrée et sortie DMX : XLR 3 broches- Alimentation électrique via le bloc d'alimentation fourni ou la batterie intégrée- Fabriqué en aluminium et en acier galvanisé- Dimensions : 12,5 x 12,5 x 4,8 cm- Poids : 0,72 kg- Couleur du boîtier : gris anthracite- 1x Connect- 1x bloc d'alimentation Ape Labs PSU de 27 Watt- 2x Antennes 2,4GHz |
|
| Ape Labs : Battery Pack Ni-MH 7.2 V (1 comments)
Pièce de rechange pour ApeLight Mini V1 & V2 & WAPP & CONNECT- Ni-MH 7,2 V - 2 200 mAh (1...(+) Pièce de rechange pour ApeLight Mini V1 & V2 & WAPP & CONNECT- Ni-MH 7,2 V - 2 200 mAh (15,84 Wh)- Dimensions (H x L x P): 40 x 55 x 30 mm |
|
| Ape Labs : Universal Stand grey
Ape Labs Universal Stand grey; Universal stand for ApeLight mini, ApeLight Maxi, ApeStick,...(+) Ape Labs Universal Stand grey; Universal stand for ApeLight mini, ApeLight Maxi, ApeStick, LightCan, ApeCoin; Suitable for all V1 and V2 lamp generations; Adapter piece for vertical ApeStick mounting included; Mounting for ApeLight Mini / ApeLight Maxi included; Thread adapter 3/8" to M6 for LightCan and ApeCoin included; Telescopic tube adjustable from 106 cm to 200 cm; Mounting of all Ape Labs lights also possible directly on the base plate with the respective adapter; Telescopic tube made of galvanized steel (magnetic); Base plate made of galvanized steel; Note: With the Ape Labs Magnet Ball Adapter, LightCan and ApeCoin can be tilted in all directions (Not included); Note: This item does not include a light source; Dimensions base plate: 290 x 290 x 2 mm; Dimensions telescopic tube: 1060 mm to 2000 mm, diameter 20 mm; Weight: 3 kg; Scope of delivery: 1 x base plate, 1 x telescopic tube, 1 x design screw 3/8" - 6mm, 4 x felt sticker feet, 1 x ApeStick aluminum adapter, 1 x adapter screw 3/8" to M6, 2 x knurled screw M6, 2 x knurled screw 3/8" |
|
| Ape Labs : Battery Pack Ni-MH 9.6 V Pour ApeStick 4 & ApeStick SE- Batterie Ni-MH- 9,6 V- 2200 mAh (21,12 Wh) |
|
| Ape Labs : Maxi V1 and V2 Battery Pack
Ape Labs ApeLight Maxi V1 & V2 Battery Pack Ni-MH 12 V 4500 mAh (54 Wh) for ApeLight Maxi ...(+) Ape Labs ApeLight Maxi V1 & V2 Battery Pack Ni-MH 12 V 4500 mAh (54 Wh) for ApeLight Maxi V1 & V2; Dimensions: 12.8 x 9.5 x 2.5 cm; Weight: 0.8kg |
|
| Ape Labs : Connect Creme (4 comments)
Convient pour le contrôle des produits Ape Labs via smartphone, Wireless DMX et KNX- 2x C...(+) Convient pour le contrôle des produits Ape Labs via smartphone, Wireless DMX et KNX- 2x Connect peuvent être connectés en tant que système DMX sans fil en tant qu'émetteur et récepteur- Batterie intégrée avec une autonomie allant jusqu'à 50 heures par charge- Possibilité d'utiliser jusqu'à quatre Connect en parallèle- Convient pour contrôler un maximum de quatre univers DMX- Réalisation de mises à jour du micrologiciel des appareils Ape Labs et du Connect via l'application- Entrée et sortie DMX : XLR 3 broches- Alimentation électrique via le bloc d'alimentation fourni ou la batterie intégrée- Fabriqué en aluminium et en acier galvanisé- Dimensions : 12,5 x 12,5 x 4,8 cm- Poids : 0,72 kg- Couleur du boîtier : blanc crème- 1x Connect- 1x bloc d'alimentation Ape Labs PSU de 27 Watt- 2x Antennes 2,4GHz |
|
| Ape Labs : Magnet Ballhead Adapter (26 comments)
Rotule pivotante pour module LED ApeCoin- Adaptateur à rotule permettant de fixer un ApeC...(+) Rotule pivotante pour module LED ApeCoin- Adaptateur à rotule permettant de fixer un ApeCoin à tout objet métallique- Force d'adhérence de 8 kg- Filetage M6- Dimensions: 56 x 33 x 46 mm- Poids: 0,3 kg |
|
| Ape Labs : ApeLight mini Tube V2
Tube amovible de 1 mètre qui distribue la lumière de l'ApeLight Mini V2 à 360° sur tou...(+) Tube amovible de 1 mètre qui distribue la lumière de l'ApeLight Mini V2 à 360° sur toute la longueur du tube- Est monté avec une pièce d'adaptation en acier inoxydable (incl.)- Matériau robuste et incassable- Embout en aluminium- La stabilité du tube est assurée par le poids de l'ApeLight Mini V2- La pièce d'adaptation et le tube peuvent être séparés l'un de l'autre pour permettre un transport peu encombrant- L'ApeLight Mini V2 peut également être utilisé sans le tube lorsque l'adaptateur est monté et peut être chargé dans le flight case de tournée ou une mallette Peli- Grâce à son design précieux, le tube peut être utilisé dans de nombreux domaines d'application- Dimensions du tube: 1000 x 50 x 50 mm- Poids du tube: 70 g- 1 tube avec embout- 1 pièce d'adaptation- 1 adaptateur X-plate pour ApeLight Mini V2 |
|
| Ape Labs : Table Tube Adapter V2 (12 comments)Pour ApeCoin V1 / V2 & LightCan V1 / SE / V2 ainsi qu'au Fun Generation LED Puck |
|
| Ape Labs : ApeStick adapter for base
Ape Labs ApeStick - adapter for base plate & microphone stand; Adapter for mounting the Ap...(+) Ape Labs ApeStick - adapter for base plate & microphone stand; Adapter for mounting the ApeStick on a base plate or microphone stand; Bottom thread hole for 3/8" - depth min. 13mm; Suitable for all ApeStick versions. ApeStick 4, L, XL; Adapter piece for upright mounting of the ApeStick; Revised design. ApeStick can be fixed with a knurled screw to prevent it from falling out; Note: This one Item does not include bulb and base plate Package Contents: 1 x ApeStick Aluminum Adapter 1 x M6 Knurled Screw; |
|
| Ape Labs : Power Supply Unit 18V 1.5A (13 comments)
Convient pour lampes Ape Labs- Les modèles LightCan, ApeStick4 et ApeLight mini peuvent Ã...(+) Convient pour lampes Ape Labs- Les modèles LightCan, ApeStick4 et ApeLight mini peuvent être connectés via le splitter disponible en option afin de charger plusieurs unités avec un chargeur- Alimentation pour modèles: MobiLight4, W-APE Transceiver, LightCan (avec splitter 2-voix-/4-voix: 4 appareils), ApeStick4 (avec splitter pour 2 appareils), ApeLight mini(avec splitter 2-voix-/4-voix: 4 appareils)- Spécifications:- CE, UL, US LISTED, TÃœV, GS, FCC Part15, Class B- Entrée: CA 100-240V 50/60Hz 0.4A- Sortie: DC 18V 1.5A |
|
| Ape Labs : Remote Control V2 Grey (3 comments)
Convient pour tous les produits Ape Labs- Communique par radio dans la bande 2,4 GHz avec ...(+) Convient pour tous les produits Ape Labs- Communique par radio dans la bande 2,4 GHz avec les lampes Ape Labs- Tous les produits Ape Labs peuvent être divisés en 4 groupes au maximum, chacun pouvant être contrôlé de manière synchrone ou séparément- Gestion de 4 groupes- Portée : 30 m- Possibilité d'appairage (couplage) entre la télécommande et une ou plusieurs lampes (pas de limite)- Bande 2,4 GHz (2.400 - 2.485 MHz)- Dimensions : 8,54 x 5 x 0,6 cm- Poids : 24 g- Matériau : plastique- couleur : gris anthracite- Pile (CR2025) fournie- Fabriqué en Allemagne |
|
| Ape Labs : WAPP / Connect Antenne Ape Labs WAPP / Connect Antenna |
|
| Ape Labs : ApeStick Metal Sheet
Plaque métallique pour fixer un ApeStick sur des surfaces non magnétiques- Dimensions: 5...(+) Plaque métallique pour fixer un ApeStick sur des surfaces non magnétiques- Dimensions: 50 x 35 mm |
|
| Ape Labs : Pinspot Adapter 7° (3 comments)
Pour pinspot- Angle de faisceau: 7°- En polyoxyméthylène- Dimensions: 120 x 55 mm- Poid...(+) Pour pinspot- Angle de faisceau: 7°- En polyoxyméthylène- Dimensions: 120 x 55 mm- Poids: 142 g- GU10- ApeCoin V1- ApeCoin V2- LightCan V1- LightCan SE- LightCan V2- TableLight V1- TableLight V2 |
|
| Ape Labs : Maxi V1 Face (1 comments)Pièce détachée pour ApeLight maxi V1- Dimensions: 130 x 130 mm- Hauteur: 4 mm |
|
| Ape Labs : 10 degree lens for LightCan (41 comments)
Avec la lentille de 10 degrés d' Ape Labs, il est possible de créer un angle de faisceau...(+) Avec la lentille de 10 degrés d' Ape Labs, il est possible de créer un angle de faisceau plus étroit avec un éclairage vers le haut, combiné à des bords doux et à un mélange de couleurs très homogène- Fabriqué en Allemagne- Se visse sur le LightCan et remplace l'objectif standard fourni- S'adapte sur chaque LightCan- Angle du faisceau : 10°- Mélange de couleurs homogène- Contenu de la livraison : 1x 10 degrés |
|
| Ape Labs : ApeStick 4 Magnet
Ape Labs ApeStick 4 Magnet (without ring) ; Spare part for ApeStick4 ; Replacement magnet ...(+) Ape Labs ApeStick 4 Magnet (without ring) ; Spare part for ApeStick4 ; Replacement magnet ; diameter: 25 mm ; height: 15mm |
|
| Ape Labs : Dome Adapter (6 comments)Accessoire adapté pour ApeCoin et LightCan |
|
| Ape Labs : Effect Lens 65° Can / Coin V1 Pour Ape Labs Light Can / Coin- Diamètre: 52 mm- Hauteur: 2 mm |
|