| B&S : 3005 WTR-L Trumpet (7 comments)
3x Cylinder valves- Sound equalization on the third valve- Gold brass bell Ø 140 mm- Bore...(+) 3x Cylinder valves- Sound equalization on the third valve- Gold brass bell Ø 140 mm- Bore 11 mm- Cylinder engine with the new 3B-joints- Golden brass body- Conical rotary valves- Long tuning slides- Nickel silver inner and outer slides- Corrosion safe nickel silver lead-pipe- Clear lacquer finish- Includes mouthpiece and case- Made in Germany |
|
| B&S : 3005/3TR-L Trumpet (7 comments)
3x Cylinder valves- Sound equalization on the third valve- Gold brass bell Ø 126 mm- Bore...(+) 3x Cylinder valves- Sound equalization on the third valve- Gold brass bell Ø 126 mm- Bore 11 mm- Cylinder engine with the new 3B-joints- Golden brass body- Conical rotary valves- Long tuning slides- Nickel silver inner and outer slides- Corrosion safe nickel silver lead-pipe- Clear lacquer finish- Includes mouthpiece and case- Made in Germany |
|
| B and S : EXC-S eXquisite C-Trumpet
Exquisite series- Hand-hammered light brass blade from blade section- Crimped hem border- ...(+) Exquisite series- Hand-hammered light brass blade from blade section- Crimped hem border- Change of Monel- Nickel silver outer- Stopper on the 3rd valve train- Bore: 11.66 mm (ML)- Sound diameter: 122 mm- Silver-plated- Incl. Case and mouthpiece- Made in Germany |
|
| B and S : Metropolitan C- Trumpet (1 comments)
Bore: 11.73 mm- Hand-hammered, one-piece cup - new design: 121.5 mm- Hand-lapped, light-we...(+) Bore: 11.73 mm- Hand-hammered, one-piece cup - new design: 121.5 mm- Hand-lapped, light-weight Perinet monel pistons- Water key on main tuning slide- Saddle on the 1st valve slide- Ring and stopper on 3rd valve slide- 2-piece valve body made of brass / nickel silver- New designed leadpipe and mouthpiece receiver- New system for individual attachment of exchangeable additional weights (Harmonic Balancing System 3 sets)- Silver-plated brass- Incl. double soft case |
|
| B&S : 3131/2-S Bb-/A- Piccolo (1 comments)
High Bb / A Trumpet- Silver-plated brass- Bore 11.8 mm- Bell: 100 mm- Hand hammered from s...(+) High Bb / A Trumpet- Silver-plated brass- Bore 11.8 mm- Bell: 100 mm- Hand hammered from sheet metal- Nickel silver outer slides- 2 Water keys- Bb and A mouth pipe- Ring and snap-off stopper on the 3rd slide- Trigger on the 3rd valve- Valve caps with real mother-of-pearl inlays- Incl. Prestige case and mouthpiece- Made in Germany |
|
| B&S : 3131/2-L Bb-/A- Piccolo
Brass, lacquered- Bore: 11.8 mm- Bell: 100 mm- Hand hammered from sheet metal- Nickel silv...(+) Brass, lacquered- Bore: 11.8 mm- Bell: 100 mm- Hand hammered from sheet metal- Nickel silver outer slides- 2 Water keys- Bb and A mouth pipe- Ring and snap-off stopper on the 3rd slide- Trigger on the 3rd valve- Valve caps with real mother-of-pearl inlays- Incl. Prestige case and mouthpiece- Made in Germany |
|
| BandS : 3137-L Challenger I L (5 comments)
Brass body- ML bore: 11.66 mm- Brass bell Ø: 121.5 mm- Monel valves- Nickel silver outer ...(+) Brass body- ML bore: 11.66 mm- Brass bell Ø: 121.5 mm- Monel valves- Nickel silver outer slides- 2 Water keys- Clear lacquered- Incl. ICON 7C mouthpiece and luxury case- Made in Germany |
|
| B&S : 3136TC-S Challenger II (1 comments)
Thierry Caens sound- Brass body- 11.73 mm bore (CL)- One-piece, light, hand-hammered Ø 12...(+) Thierry Caens sound- Brass body- 11.73 mm bore (CL)- One-piece, light, hand-hammered Ø 121.50 mm gold brass bell- Monel valves- Nickel silver outer slides- Slide stop screw on the third slide- 2 Water keys- Silver-plated- Including mouthpiece and prestige case- Made in Germany |
|
| B and S : 3136TC-L Challenger II (1 comments)
Thierry Caens bell- Brass body- 11.73 mm Bore (CL)- One-piece, light hand hammered Ø 121....(+) Thierry Caens bell- Brass body- 11.73 mm Bore (CL)- One-piece, light hand hammered Ø 121.5 mm gold brass bell- Monel valves- Nickel silver outer slides- Slide stop on the 3rd slide- 2 Water keys- Coated with a clear lacquer- Incl. Mouthpiece and a deluxe case- Made in Germany |
|
| BandS : EXE-S eXquisite Eb-Trumpet
From the B- Bore Ø 11.40 mm (ML)- Hand-hammered, tunable, light brass bell- Bell: Ø 115 ...(+) From the B- Bore Ø 11.40 mm (ML)- Hand-hammered, tunable, light brass bell- Bell: Ø 115 mm- Flat beaded rim (French bead flat rim)- Nickel silver outer slides- Monel switch- Saddle on the first valve slide- Water valve on the third valve slide- Finish: Silver-plated- Including twin case- Made in Germany |
|
| BandS : 3137-S Challenger II S (3 comments)
Lightweight Stössl- Low noise plastic valve guides with concealed barrel-shaped spring gu...(+) Lightweight Stössl- Low noise plastic valve guides with concealed barrel-shaped spring guide- Special monel with self-lubricating properties- Saddle on the 3rd slide- One-piece valve housing- Split 3rd slide with ring- "Educational slide stop"- Lower valve cover with integrated groove for drip protection- Single-piece bell with longitudinal seam- Bell edge beaded with nickel silver wire- 11.66 mm ML Bore- Bell diameter 125 mm- Outer slides nickel silver- Monel valves- Slide stop screw on 3rd slide- Two water keys- Silver-plated- Incl. mouthpiece and prestige case- Made in Germany |
|
| BandS : 3137-S Challenger I S (9 comments)
Light metal Stössl -weight-saving- Low noise plastic cross guide with concealed barrel-sh...(+) Light metal Stössl -weight-saving- Low noise plastic cross guide with concealed barrel-shaped spring guide- Special Monel with self-lubricating property- Stop nut on the 1st valve slide- Valve body in one piece- Divided 3rd valve with ring (see also Fig. 3)- Fixable tension fastener "Educational Slide Stop"- Lower valve cover with internal groove for drip protection- One-piece bell with longitudinal seam- Bell edge beaded with nickel silver wire- 11.66 mm ML bore- Brass bell diameter 121.5 mm- Exterior drawers in nickel silver- Monel valves- Two water keys- Silver plated brass- Includes ICON 7C mouthpiece and luxury case- Made in Germany |
|
| B and S : BS210-1-0 Prodige Bb- Trumpet (3 comments)
Handmade brass bell Ø: 123 mm- Gold brass leadpipe- Bore: 11.68 mm- Smooth-running Monel ...(+) Handmade brass bell Ø: 123 mm- Gold brass leadpipe- Bore: 11.68 mm- Smooth-running Monel valves- Saddle for the thumb on the 1st slide- Finger ring on 3rd slide- Clear lacquered- Incl. mouthpiece, gig bag and accessories |
|
| BandS : 3137 G-L Challenger I GM (2 comments)
Brass body- Gold brass leadpipe- ML bore: 11.66 mm- Gold brass bell diameter: 122 mm- Mone...(+) Brass body- Gold brass leadpipe- ML bore: 11.66 mm- Gold brass bell diameter: 122 mm- Monel valves- Nickel silver outer slides- Clear lacquered- 2 Water keys- Includes ICON 7C mouthpiece and luxury case- Made in Germany |
|
| B and S : PMH-L Personality M. Hutter
Martin Hutter Model- Bore: 11.66 mm- Brass bell Ø: 120 mm with flat rim- 3 Monel valves i...(+) Martin Hutter Model- Bore: 11.66 mm- Brass bell Ø: 120 mm with flat rim- 3 Monel valves in lightweight construction- MH leadpipe and tuning slide- "Heavy" cap on the 3rd valve- Short, straight connecting struts- Brand and model emblem in tuning slide- Finish: clear lacquer- Incl. double soft case in backpack design, mouthpiece, valve oil, slide grease and care cloth |
|
| B and S : 3137/2-S PCL Philip Cobb (1 comments)
Philip Cobb London Model- Brass body- ML-bore: 11.66 mm- One-piece, hand-hammered brass be...(+) Philip Cobb London Model- Brass body- ML-bore: 11.66 mm- One-piece, hand-hammered brass bell- Bell: Ø 122 mm- PCL lead pipe- Monel valves- Nickel silver outer slides- Ring and stopper on the 3rd valve slide- Saddle on the 1st valve slide- Water keys on the 3rd valve slide and main tuning slide- Silver-plated- Mouthpiece and wooden case included |
|
| B and S : PBB-GM Personality B. Brown
Benny Brown model- Bore: 11.73 mm "L"- Extra large bell Ø: 135 mm in lightweight construc...(+) Benny Brown model- Bore: 11.73 mm "L"- Extra large bell Ø: 135 mm in lightweight construction- 3 Monel valves in lightweight construction- Special BB receiver and leadpipe construction in reversed design- Flat valve buttons "new design"- Large ergonomic ring on 1st slide- Short, straight connecting struts- Brand and model emblem in the tuning slide- Finish: matte gold lacquer- Incl. double soft case in backpack design, mouthpiece, valve oil, slide grease and care cloth |
|
| BandS : 3137 Challenger I Trp. - Set (1 comments)
Thomann Music Stand Aluminium Black- Voggenreiter Trumpet Basics- Harley Benton MT100- K&M...(+) Thomann Music Stand Aluminium Black- Voggenreiter Trumpet Basics- Harley Benton MT100- K&M 15213 Trumpet Stand 5-Leg- B&S 3137-L Challenger I L |
|
| BandS : 3137/2-L Challenger II L
Brass body- ML Bore: 11.66 mm- Single piece, hand hammered Ø 125 mm brass bell- Monel val...(+) Brass body- ML Bore: 11.66 mm- Single piece, hand hammered Ø 125 mm brass bell- Monel valves- Nickel silver outer slides- Slide stop screw on 3rd slide- 2 Water keys- Clear lacquer finish- Incl. mouthpiece and prestige case- Made in Germany |
|
| BandS : 3138/2-V Vintage Trp.
Challenger series- "Vintage" model- 37 Lightweight bell- Brass body- ML bore: 11.66 mm- On...(+) Challenger series- "Vintage" model- 37 Lightweight bell- Brass body- ML bore: 11.66 mm- One-piece, hand-hammered brass bell Ø: 122 mm- Monel valves- Nickel silver outer slide- 2Water keys- Special "vintage" surface treatment- Incl. mouthpiece and wooden case |
|