| Palmer : Macht 402 (132 comments)
Surtout pour guitare électrique- Puissance de sortie: 2x 200W sous 4 Ohm, 2x 100W sous 8 ...(+) Surtout pour guitare électrique- Puissance de sortie: 2x 200W sous 4 Ohm, 2x 100W sous 8 Ohm- Mode bridge: 1x 400W sous 8 Ohm- Circuit dynamique de classe D- Réponse en fréquences: 20 - 20 000 Hz- Protection du circuit: démarrage en douceur, de court-circuit, DC, surchauffe, surtension- Contrôles: marche / arrêt, volume, haut, bas, mode (bridge / parallèle / stéréo)- Interrupteur de masse- Limiteur de sensibilité- Entrées niveau ligne: 2x XLR et 2x jack 6,3 mm- Sorties haut-parleur: 2x Speaker Twist et 3x jack 6,3 mm- Dimensions (LxHxP): 482 x 44 x 244 mm |
|
| Palmer Mi : Cab 212 X Unloaded (7 comments)
Pour 2 haut-parleurs 12"- Boîtier en aggloméré- Déflecteur en MDF- Pan arrière fermé...(+) Pour 2 haut-parleurs 12"- Boîtier en aggloméré- Déflecteur en MDF- Pan arrière fermé- Front Loaded- Grille avant en tissu- Entrée/sortie sur Jack 6,3 mm- Poignées latérales- Dimensions (L x H x P): 710 x 480 x 295 mm- Poids: 14 kg- Couleur: Noir- N° Palmer: PCAB212X |
|
| Palmer : CAB 112/Fat 50 Cover (103 comments)
Pour baffle Palmer 1 x 12" ou combo Palmer Fat 50 1 x 12"- En nylon- Dimensions: 580 x 290...(+) Pour baffle Palmer 1 x 12" ou combo Palmer Fat 50 1 x 12"- En nylon- Dimensions: 580 x 290 x 450 mm- Poids: 200 g- Couleur: Noir |
|
| Palmer : PDI-06-16 Ohm (49 comments)
Version 16 Ohm- Format: 9,5"-1U- 6 niveaux de sortie: 18% - 25% - 35% - 50% - 70% - 100%- ...(+) Version 16 Ohm- Format: 9,5"-1U- 6 niveaux de sortie: 18% - 25% - 35% - 50% - 70% - 100%- Pour baffles 16 Ohm- Sélecteur Bypass/Attenuator- 1 entrée sur Jack 6,3 mm- 1 sortie sur Jack 6,3 mm- Puissance admissible max.: 120 Watt |
|
| Palmer : PDI-06-8 Ohm (54 comments)
Version 8 Ohm- Format: 9,5"-1U- 6 niveaux de sortie: 18% - 25% - 35% - 50% - 70% - 100%- P...(+) Version 8 Ohm- Format: 9,5"-1U- 6 niveaux de sortie: 18% - 25% - 35% - 50% - 70% - 100%- Pour baffles 8 Ohm ou 2 x 16 Ohm- Sélecteur Bypass/Attenuator- 1 entrée sur Jack 6,3 mm- 2 sorties sur Jack 6,3 mm |
|
| Palmer : MI Pocket Amp Acoustic (14 comments)
Portable Preamp - For acoustic string instruments with piezo and magnetic pickups - Three ...(+) Portable Preamp - For acoustic string instruments with piezo and magnetic pickups - Three selectable basic sounds: Flat, Modern and Vintage - Input limiters, polarity selector and notch filters - 3-Band EQ with semi-parametric center control - Balanced XLR DI Out - Tuner output - Operation with 9 V battery or 9 V DC power supply (not included, suitable power supply available under Art.409939) - Dimensions (W x H x D) 100mm x 55mm x 100mm |
|
| Palmer Mi : Pedalbay 40 PB Ped Board + PSU (75 comments)
Pedalboard Palmer Pedalbay 40 + bloc d'alimentation Palmer WT PB 40 avec 8 sorties- Le blo...(+) Pedalboard Palmer Pedalbay 40 + bloc d'alimentation Palmer WT PB 40 avec 8 sorties- Le bloc d'alimentation peut être fixé sur le rail arrière du Pedalbay 40- En aluminum- Sorties d'alimentation 1-6: 9V DC sous max. 300 mA (isolées individuellement)- Sorties d'alimentation 7-8: 9/12/18V DC sous max. 500 mA (isolées individuellement)- Dimensions (LxPxH): 450 x 305 x 70 mm- Poids: 3,8 kg- Set de câbles, 2 bandes élastiques noires, bande scratch d'env. 2,5 m et housse de transport incl. |
|
| Palmer : Tino (25 comments)
Système de commutation de 2 amplificateurs vers 1 baffle avec entrée Remote- 1 entrée i...(+) Système de commutation de 2 amplificateurs vers 1 baffle avec entrée Remote- 1 entrée instrument sur Jack- 2 sorties amplis sur Jack- 2 sorties HP- Interrupteur de masse commutable par canal- Commutateur de sélection- Entrée Remote-Control sur Jack pour pédalier- Bloc d'alimentation externe 9V 130 mA incl.- Impédance d'entrée: 10 MOhm- Impédance de sortie: 10 KOhm- Dimensions: 222 x 44 x 175 mm |
|
| Palmer : MI CAB CASTORS (170 comments)
Pour baffles guitare/basse- 2 roulettes pivotantes avec freins- 2 roulettes pivotantes san...(+) Pour baffles guitare/basse- 2 roulettes pivotantes avec freins- 2 roulettes pivotantes sans freins- Diamètre des roulettes: 50- Hauteur: 72 mm- Capacité de charge par set: 120 kg- Largeur de la bande de roulement: 16 mm- Dimensions des plaques: 50 x 50 x 2 mm- Espacement des trous: 45 mm- Diamètre des trous de fixation: 6,5 mm- 16 vis noires à tête plate de 19 mm incl. |
|
| Palmer : MI Pedalbay 60 (630 comments)
Réglable en hauteur- Bretelles réglables- Support pour alimentation- Dimensions (LxHxP):...(+) Réglable en hauteur- Bretelles réglables- Support pour alimentation- Dimensions (LxHxP): 605 x 70 x 305 mm |
|
| Palmer Mi : Pedalbay 60 PB Ped Board + PSU (17 comments)
Combine le Palmer Pedalbay 60 et l'alimentation 8 sorties Palmer WT PB 60- L'alimentation ...(+) Combine le Palmer Pedalbay 60 et l'alimentation 8 sorties Palmer WT PB 60- L'alimentation peut être fixée sur le rail arrière du Pedalbay 60- En aluminum- Dimensions (L x P x H): 605 x 305 x 70 mm- Poids: 4,5 kg- Jeu de câbles, 2 cordons élastiques noirs, environ 3 m de ruban à crochets, housse de transport incl.- Sorties 1-6: 9V DC sous 300 mA max. (isolées individuellement)- Sorties 7-8: 9/12/18V DC sous 500 mA max. (isolées individuellement) |
|
| Palmer Mi : WT PB 40 Multi Power Supply (49 comments)
Pour pédales d'effets- Alimentation Powerbar 8 sorties pour Palmer Pedalbay 40 & Harley B...(+) Pour pédales d'effets- Alimentation Powerbar 8 sorties pour Palmer Pedalbay 40 & Harley Benton Spaceship 40- S'intègre discrètement au pedalboard (se fixe à la place de la barre supérieure du pedalboard)- Sorties 1-6: 9V DC sous 300 mA max. (isolées individuellement)- Sorties 7-8: 9/12/18V DC sous 500 mA max. (isolées individuellement)- Puissance totale max.: 2000 mA- 5 câbles de 160 mm avec fiches cylindriques droites vers fiches cylindriques coudées 5,5 x 2,1 mm incl.- 9 câbles de 600 mm avec fiches cylindriques droites vers fiches cylindriques coudées 5,5 x 2,1 mm incl.- Bloc d'alimentation 12 V DC incl.- Dimensions: 450 x 50 x 24 mm- Poids: 650 g |
|
| Palmer : CAB M Merger (242 comments)
2x entrées et 2x sorties- Les baffles peuvent être connectées en série ou en parallèl...(+) 2x entrées et 2x sorties- Les baffles peuvent être connectées en série ou en parallèle |
|
| Palmer Mi : Cab 212 X V30
2 haut-parleurs Celestion Vintage 30- Puissance admissible: 120 Watt mono, 2x 60 Watt sté...(+) 2 haut-parleurs Celestion Vintage 30- Puissance admissible: 120 Watt mono, 2x 60 Watt stéréo- Impédance: 8 Ohm mono, 16 Ohm stéréo- Boîtier en aggloméré- Pan arrière fermé- Déflecteur en MDF- Pan arrière ouvert- Front Loaded- Grille avant en tissu- Entrée/sortie sur Jack 6,3 mm- Poignées latérales- Dimensions (L x H x P): 710 x 480 x 295 mm- Poids: 23 kg- Couleur: Noir |
|
| Palmer : MI Pedalbay 40 (588 comments)
En aluminium poudré- Barres transversales réglables- Hauteur réglable- Dimensions HLP: ...(+) En aluminium poudré- Barres transversales réglables- Hauteur réglable- Dimensions HLP: 70-85 x 450 x 305 mm- Poids: 3,51 kg- Housse rembourrée, bande scratch d'env. 2,5 m, 2 bandes élastiques et clé allen incl. |
|
| Palmer : Pocket Amp MK2 Guitar Preamp (184 comments)
Version entièrement révisée- Offre une gamme étendue de sons d'amplis à lampes: Sons ...(+) Version entièrement révisée- Offre une gamme étendue de sons d'amplis à lampes: Sons absolument clair à gain très élevé- Sélecteur 3 positions pour caractéristiques d'amplificateur- Mode de gain et position de microphone- Contrôles: Gain, Volume, Treble, Bass- Interrupteur de masse- Entrée/sortie sur Jack- Sortie casque- Sortie DI sur XLR- Entrée Aux- Boîtier en aluminium- Fonctionne avec une pile 9 V- Bloc d'alimentation optionnel non-fourni (N° d'article 409939) |
|
| Palmer : PWT 05 MK2 (202 comments)
Pour pédales d'effets- 5 sorties isolées individuellement 9 V DC / 250 mA- Set de câble...(+) Pour pédales d'effets- 5 sorties isolées individuellement 9 V DC / 250 mA- Set de câbles incl.- Dimensions (LxPxH): 105 x 140 x 45 mm- Poids: 1,5 kg |
|
| Palmer : PWT 04 (112 comments)
Pour pedalboard- 4 sorties isolées individuellement 9 V DC 250 mA- Dimensions: 80 x 90 x ...(+) Pour pedalboard- 4 sorties isolées individuellement 9 V DC 250 mA- Dimensions: 80 x 90 x 25 mm- Poids: 0,12 kg- Bloc d'alimentation et 4 câbles DC incl. |
|