Woodbrass
Brand:
Audio Technica
Description from Woodbrass :
Designed for sax, toms, brass and percussion, the PRO35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone's cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.FEATURES- Element: Fixed-charge back plate, permanently polarized condenser- Polar Pattern: Cardioid- Frequency Response: 50-15,000 Hz- Low Frequency Roll Off: 80 Hz, 18 dB/octave- Open Circuit Sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa- Impedance: 250 ohms- Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.- Dynamic Range: 115 dB, 1 kHz at Max SPL- Signal to Noise Ratio: 64 dB, 1 kHz at 1 Pa- Phantom Power Requiremens: 11-52V DC, 2 mA typical- Switch: Flat, roll-off- Cable: 6.0' (1.8 m) long (permanently attached to microphone), 0.10 (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector- Accessories: AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch
Designed for sax, toms, brass and percussion, the PRO35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone's cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.FEATURES- Element: Fixed-charge back plate, permanently polarized condenser- Polar Pattern: Cardioid- Frequency Response: 50-15,000 Hz- Low Frequency Roll Off: 80 Hz, 18 dB/octave- Open Circuit Sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa- Impedance: 250 ohms- Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.- Dynamic Range: 115 dB, 1 kHz at Max SPL- Signal to Noise Ratio: 64 dB, 1 kHz at 1 Pa- Phantom Power Requiremens: 11-52V DC, 2 mA typical- Switch: Flat, roll-off- Cable: 6.0' (1.8 m) long (permanently attached to microphone), 0.10 (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector- Accessories: AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch
| Seller information : | Woodbrass |
| Place : | Nantes, France |
| Shipping : | Livraison Mondiale |
SIMILAR ITEMS
