Woodbrass
Brand:
Focusrite
Description from Woodbrass :
You may only need a couple of mic preamps, but they need to be the very best. The ISA Two dual-mono mic pre is the ideal solution: two independent channels of the highest quality classic Focusrite mic pres, with line in and front-panel instrument inputs no DI box required. Based on the legendary designs found in the Focusrite Forte and Studio Consoles, ISA Two is the ideal front-end for your rack.Superb sound spanning four different decadesFocusrites microphone preamplifiers go back to the original Focusrite ISA 110 modules, when Rupert Neve was commissioned by George Martin in 1985 to create a no-compromise channel strip for his Neve console. Combining the very best solid-state electronics with transformer coupling, Focusrite mic pres have played a key part in the recording of hundreds of hit records and theyre the choice of leading artists, producers and engineers around the world.Lundahl TransformersAt the heart of the ISA Two is a pair of Lundahl LL1538 transformers. ISA products have relied on Lundahl from the beginning, since their components were originally specified in 1985. The LL1538 features a 3-section winding, resulting in very low leakage inductance and, as a result, an extended frequency response. Theyre encapsulated in mu-metal cans to shield them from stray magnetism.Variable input impedance and up to 80 dB of gainISA Two features two classic Focusrite mic preamps, with four impedance settings including the original ISA 110 setting. Variable input impedance allows you to go for an accurate, transparent sound or choose to highlight the character of your favourite vintage mic and anywhere in between. With up to 80 dB of low-noise gain, ISA Two can perform in the most demanding situations - really bringing your ribbon, condenser or moving coil mics to life.Insert your choice of processorsEach channel has a fully-balanced insert point accessed via TRS sockets on the rear panel and activated with a front-panel button, so its easy to use outboard processors with the ISA Two. Just plug in your choice of EQ, compressor or limiter.Two channel classic Focusrite ISA transformer-based preampFront panel, per channel:1/4 instrument inputVariable input impedance - Low, ISA 110, Medium, HighInput selection - Mic, Line, Instrument0 - 30 dB/30 - 60 dB gain switchPhantom power switchPhase invert switch0 - 60 dB gain in 10 dB steps0 - +20 dB continuously variable trimVariable high-pass filter with on/off switchInsert point on/off switchEight-LED user-calibrated level metersSingle power switchRear panel, per channel:XLR-F mic inputs1/4 TRS line inputs1/4 TRS Sends1/4 TRS ReturnsXLR-M line outputSingle peak meter calibration dialSingle IEC power socketNoise at main output with gain at unity (0 dB) measured with 50 source impedance and a 22Hz - 22 kHz band pass filterW x D x H 480 mm x 280 mm x 44 mmWeight 3.7 kg
You may only need a couple of mic preamps, but they need to be the very best. The ISA Two dual-mono mic pre is the ideal solution: two independent channels of the highest quality classic Focusrite mic pres, with line in and front-panel instrument inputs no DI box required. Based on the legendary designs found in the Focusrite Forte and Studio Consoles, ISA Two is the ideal front-end for your rack.Superb sound spanning four different decadesFocusrites microphone preamplifiers go back to the original Focusrite ISA 110 modules, when Rupert Neve was commissioned by George Martin in 1985 to create a no-compromise channel strip for his Neve console. Combining the very best solid-state electronics with transformer coupling, Focusrite mic pres have played a key part in the recording of hundreds of hit records and theyre the choice of leading artists, producers and engineers around the world.Lundahl TransformersAt the heart of the ISA Two is a pair of Lundahl LL1538 transformers. ISA products have relied on Lundahl from the beginning, since their components were originally specified in 1985. The LL1538 features a 3-section winding, resulting in very low leakage inductance and, as a result, an extended frequency response. Theyre encapsulated in mu-metal cans to shield them from stray magnetism.Variable input impedance and up to 80 dB of gainISA Two features two classic Focusrite mic preamps, with four impedance settings including the original ISA 110 setting. Variable input impedance allows you to go for an accurate, transparent sound or choose to highlight the character of your favourite vintage mic and anywhere in between. With up to 80 dB of low-noise gain, ISA Two can perform in the most demanding situations - really bringing your ribbon, condenser or moving coil mics to life.Insert your choice of processorsEach channel has a fully-balanced insert point accessed via TRS sockets on the rear panel and activated with a front-panel button, so its easy to use outboard processors with the ISA Two. Just plug in your choice of EQ, compressor or limiter.Two channel classic Focusrite ISA transformer-based preampFront panel, per channel:1/4 instrument inputVariable input impedance - Low, ISA 110, Medium, HighInput selection - Mic, Line, Instrument0 - 30 dB/30 - 60 dB gain switchPhantom power switchPhase invert switch0 - 60 dB gain in 10 dB steps0 - +20 dB continuously variable trimVariable high-pass filter with on/off switchInsert point on/off switchEight-LED user-calibrated level metersSingle power switchRear panel, per channel:XLR-F mic inputs1/4 TRS line inputs1/4 TRS Sends1/4 TRS ReturnsXLR-M line outputSingle peak meter calibration dialSingle IEC power socketNoise at main output with gain at unity (0 dB) measured with 50 source impedance and a 22Hz - 22 kHz band pass filterW x D x H 480 mm x 280 mm x 44 mmWeight 3.7 kg
Face avant:Chaque canal de l'ISA Two dispose de:
- Potentiomètre de gain et Sélecteur de plage de gain
- Sélecteur d'impédance
Sélecteur d'entrée
Potentiomètre de filtre (glissant de 16 Hz à 420 Hz)
- Switch phase, insert, 48V, HPF (18dB/ octave à 75Hz), Gain 30-60
- 2 entrées haute impédance pour instrument
Un double vu-mètre LED
Face arrière:- 2 entrées MIC
- 2 entrées ligne en jack TRS
- 2 sorties au format XLR
- 2 Send/ Return au format jack TRS,
Entrée micro:- Plage de gain: 0dB à 60dB par pas de 10dB
- Sélection d'impédance: 600 O, 1k4 kO, 2k4 kO, 6k8 kO
- EIN: -126dB mesuré à 60dB de gain avec une terminaison à 150 Ohm sur une bande filtrée de 20Hz/22kHz
- Bruit en sortie à (0dB): -97dBu mesuré sur une bande filtrée de 20Hz/22kHz
- Rapport signal sur bruit relatif au headroom maximal (9dBu): 106dB
- THD à gain médium (30dB): 0.0008% mesuré à 1kHz -20dBu de signal d'entrée sur une bande filtrée de 20Hz/22kHz
- Réponse en fréquences à (0dB): -0.5dB jusqu'à 10Hz et 3dB jusqu'à 110kHz
- Réponse en fréquences à gain maximum (60dB): 3dB jusqu'à 16Hz et 3dB jusqu'à 85kHz,
Entrée ligne:- Plage de gain: -20dB à 10dB par pas de 10dB
- Impédance d'entrée: 10k de 10Hz à 200kHz,
Entrée instrument:- Plage de gain: 10dB à 40dB
- Impédance d'entrée: 1M ou 300k,
Vu-mètre:LED 8 segments pour contrôler le niveau de sortie des préamplis,
Poids:3.7 kg,
Dimmensions:480mm x 280mm x 44mm
- Potentiomètre de gain et Sélecteur de plage de gain
- Sélecteur d'impédance
Sélecteur d'entrée
Potentiomètre de filtre (glissant de 16 Hz à 420 Hz)
- Switch phase, insert, 48V, HPF (18dB/ octave à 75Hz), Gain 30-60
- 2 entrées haute impédance pour instrument
Un double vu-mètre LED
Face arrière:- 2 entrées MIC
- 2 entrées ligne en jack TRS
- 2 sorties au format XLR
- 2 Send/ Return au format jack TRS,
Entrée micro:- Plage de gain: 0dB à 60dB par pas de 10dB
- Sélection d'impédance: 600 O, 1k4 kO, 2k4 kO, 6k8 kO
- EIN: -126dB mesuré à 60dB de gain avec une terminaison à 150 Ohm sur une bande filtrée de 20Hz/22kHz
- Bruit en sortie à (0dB): -97dBu mesuré sur une bande filtrée de 20Hz/22kHz
- Rapport signal sur bruit relatif au headroom maximal (9dBu): 106dB
- THD à gain médium (30dB): 0.0008% mesuré à 1kHz -20dBu de signal d'entrée sur une bande filtrée de 20Hz/22kHz
- Réponse en fréquences à (0dB): -0.5dB jusqu'à 10Hz et 3dB jusqu'à 110kHz
- Réponse en fréquences à gain maximum (60dB): 3dB jusqu'à 16Hz et 3dB jusqu'à 85kHz,
Entrée ligne:- Plage de gain: -20dB à 10dB par pas de 10dB
- Impédance d'entrée: 10k de 10Hz à 200kHz,
Entrée instrument:- Plage de gain: 10dB à 40dB
- Impédance d'entrée: 1M ou 300k,
Vu-mètre:LED 8 segments pour contrôler le niveau de sortie des préamplis,
Poids:3.7 kg,
Dimmensions:480mm x 280mm x 44mm
| Seller information : | Woodbrass |
| Place : | Nantes, France |
| Shipping : | Livraison Mondiale |
SIMILAR ITEMS
