the t.bone : Lucan System Complete Bundle   |
Thomann
Brand:
the t.bone
Description from Thomann :
the t.bone Lucan System CC 200 RC Condenser instrument microphone
- Easy installation with various instrument holders for many different instruments (not included)
- Flexible gooseneck 120 mm for easy alignment on the instrument
- Detachable cable with screw contact
- 3-pin mini XLR plug for use with t.bone wireless systems (also suitable for Sirus and AKG wireless systems)
- Polar pattern: Cardioid
- Frequency range: 30 - 20.000 Hz
- Sensitivity: -38 dB +/- 2 dB
- Max. SPL: 130 dB
- Signal-to-noise ratio: 71 dB
- Impedance 100 Ohm
- Distortion factor: < 1%
- Cable length approx. 2 m
- Incl. Windscreen, phantom power adapter (phantom power required) and hard case (with space for an optional holder)
- Dimensions of the hard case (L x W x H): 26 x 13 x 7 cm
the t.bone Lucan System CC 200 GH Microphone Mount
- Guitar clip for the Lucan System CC 200 RC
- Suitable for clamping onto guitars or similar instruments with a thickness between 73 and 120 mm
the t.bone Lucan System CC 200 BH Hardcase
- For the Lucan System CC 200 RC
- With space for all system components (microphone, phantom adapter, cable, 1x holder each GH, VH,CH, PH,MH,SH)
- Dimensions (L x W x H): 33 x 22 x 7 cm
the t.bone Lucan System CC 200 VH Microphone Mount
- Violin clip for the Lucan System CC 200 RC
- Suitable for clamping to violins or similar instruments with a thickness of 35 to 55 mm
the t.bone Lucan System CC 200 CH Microphone Holder
- Clarinet-clip for the Lucan System CC 200 RC
- For fixing on clarinets or similar instruments with a strong hook-and-loop tape up to a diameter of 65 mm
the t.bone Lucan System CC 200 PH Microphone Mount
- Piano clip for the Lucan System CC 200 RC
- Suitable for fixing on pianos or similar instruments with strong magnets
the t.bone Lucan System CC 200 MH Microphone Mount
- Multi-Clip for the Lucan System CC 200 RC
- Suitable for clipping onto cello, saxophone, trombone, cornet or similar instruments with a thickness up to 23 mm
the t.bone Lucan System CC 200 SH Microphone Mount
- Tripod clip for the Lucan System CC 200 RC
- Suitable for screwing onto all stands with a standard 5/8" thread
the t.bone Lucan System CC 200 RC Condenser instrument microphone
- Easy installation with various instrument holders for many different instruments (not included)
- Flexible gooseneck 120 mm for easy alignment on the instrument
- Detachable cable with screw contact
- 3-pin mini XLR plug for use with t.bone wireless systems (also suitable for Sirus and AKG wireless systems)
- Polar pattern: Cardioid
- Frequency range: 30 - 20.000 Hz
- Sensitivity: -38 dB +/- 2 dB
- Max. SPL: 130 dB
- Signal-to-noise ratio: 71 dB
- Impedance 100 Ohm
- Distortion factor: < 1%
- Cable length approx. 2 m
- Incl. Windscreen, phantom power adapter (phantom power required) and hard case (with space for an optional holder)
- Dimensions of the hard case (L x W x H): 26 x 13 x 7 cm
the t.bone Lucan System CC 200 GH Microphone Mount
- Guitar clip for the Lucan System CC 200 RC
- Suitable for clamping onto guitars or similar instruments with a thickness between 73 and 120 mm
the t.bone Lucan System CC 200 BH Hardcase
- For the Lucan System CC 200 RC
- With space for all system components (microphone, phantom adapter, cable, 1x holder each GH, VH,CH, PH,MH,SH)
- Dimensions (L x W x H): 33 x 22 x 7 cm
the t.bone Lucan System CC 200 VH Microphone Mount
- Violin clip for the Lucan System CC 200 RC
- Suitable for clamping to violins or similar instruments with a thickness of 35 to 55 mm
the t.bone Lucan System CC 200 CH Microphone Holder
- Clarinet-clip for the Lucan System CC 200 RC
- For fixing on clarinets or similar instruments with a strong hook-and-loop tape up to a diameter of 65 mm
the t.bone Lucan System CC 200 PH Microphone Mount
- Piano clip for the Lucan System CC 200 RC
- Suitable for fixing on pianos or similar instruments with strong magnets
the t.bone Lucan System CC 200 MH Microphone Mount
- Multi-Clip for the Lucan System CC 200 RC
- Suitable for clipping onto cello, saxophone, trombone, cornet or similar instruments with a thickness up to 23 mm
the t.bone Lucan System CC 200 SH Microphone Mount
- Tripod clip for the Lucan System CC 200 RC
- Suitable for screwing onto all stands with a standard 5/8" thread
SIMILAR ITEMS
