Woodbrass
Marque:
Ampeg
Description de chez Woodbrass :
La série SVT-Pro est un concentré de puissance qui ne met pas de côté l’indentité sonore si caractéristique des modèles classiques Ampeg. Les têtes SVT-Pro répondent aux attentes des bassistes à la recherche de rendement dans un format lerger et transportable. Dotées de préamplis à lampes et d’une section d’égalisation étendue, la série SVT-Pro s’est fait sa place dans les racks de nombreuses tournées.
Les enceintes Pro Neo se combinent parfaitement aux têtes les plus puissantes. Leurs conceptions sans faille en plis de bouleau de 15 mm, ses HP US Eminence et le design moderne de sa grille en métal garantissent le sérieux de cette série plébicitée par les artistes et les sociétés de Backline.
• Puissance RMS:
» Dual 600 watts sous 2 ohms
» Dual 500 watts / 1200 watts
mono-bridged sous 4 ohms
» Dual 300 watts / 900 watts
mono-bridged sous 8 ohms
• Preamp: Tube (3 × 12AX7)
• Section de Puissance: MOSFET
• Correction: 3-band
• Mid-tone control: 5-positions
• EQ Graphique: 9-bandes
• Ultra Hi/Lo boosts
• Sorties Transfo symétriques
» Option Pre/post EQ
» Ground lift
La série SVT-Pro est un concentré de puissance qui ne met pas de côté l’indentité sonore si caractéristique des modèles classiques Ampeg. Les têtes SVT-Pro répondent aux attentes des bassistes à la recherche de rendement dans un format lerger et transportable. Dotées de préamplis à lampes et d’une section d’égalisation étendue, la série SVT-Pro s’est fait sa place dans les racks de nombreuses tournées.
Les enceintes Pro Neo se combinent parfaitement aux têtes les plus puissantes. Leurs conceptions sans faille en plis de bouleau de 15 mm, ses HP US Eminence et le design moderne de sa grille en métal garantissent le sérieux de cette série plébicitée par les artistes et les sociétés de Backline.
• Puissance RMS:
» Dual 600 watts sous 2 ohms
» Dual 500 watts / 1200 watts
mono-bridged sous 4 ohms
» Dual 300 watts / 900 watts
mono-bridged sous 8 ohms
• Preamp: Tube (3 × 12AX7)
• Section de Puissance: MOSFET
• Correction: 3-band
• Mid-tone control: 5-positions
• EQ Graphique: 9-bandes
• Ultra Hi/Lo boosts
• Sorties Transfo symétriques
» Option Pre/post EQ
» Ground lift
RMS Power Output: 300-Watts x 2/900 (mono-bridged @ 8 Ohms)
RMS Power Output: 490-Watts x 2/1200 (mono-bridged @ 4 Ohms)
RMS Power Output (2 Ohms): 600-Watts x 2
Preamp: Tubes (3 x 12AX7)
Power Amp: Solid State
Tone Controls: 3-Band
Mid Tone Control: 5-Position
Graphic EQ: Yes, 9-Band
Ultra Low/High Boosts: Yes
Balanced Line Out: Yes x 2 Pre/Post with Level
Effects Loop: Yes x 2
Preamp Out/Power Amp In: Yes x 2
Dimensions (W x H x D inches): 19 x 5.6 x 15.5
Weight: 42 Pounds
In the world of high-performance bass amps, Ampeg•s SVT amplifiers are in a class by themselves. In true Ampeg tradition, the SVT-4 PRO offers you more power, performance and flexibility than any other bass amplifier in its class.
SVT-4PRO offers an expansive palette of tonal options. The Frequency control allows you to select the center frequency for the Midrange control, giving you five distinct voicing options for the Midrange. And if that•s not enough, you can use the 9-Band Graphic EQ to fine-tune your sound•or use it to set up a footswitchable •second channel• with a volume boost for your bass solo.
SVT-4PRO is designed for the player who wants SVT tone and performance (with a few modern enhancements) in a convenient, high-powered, rackmount design. With a huge and diverse group of artist endorsements, including Michael Anthony (Van Halen), Tony Levin (Peter Gabriel/King Crimson), Steve Bailey (Bass Extremes), and far too many others to list here, the SVT-4PRO is a clear favorite among professionals. In the world of high performance bass amps, the Ampeg SVT-4PRO has what it takes to really define your sound.
* 1/4" and Neutrik Speakon® Outputs
* Input Peak LED
* Defeatable Optocoupler Limiters
* Variable Internal 24 dB/Octave Crossover
* Variable 0 - 7:1 Compressor
RMS Power Output: 490-Watts x 2/1200 (mono-bridged @ 4 Ohms)
RMS Power Output (2 Ohms): 600-Watts x 2
Preamp: Tubes (3 x 12AX7)
Power Amp: Solid State
Tone Controls: 3-Band
Mid Tone Control: 5-Position
Graphic EQ: Yes, 9-Band
Ultra Low/High Boosts: Yes
Balanced Line Out: Yes x 2 Pre/Post with Level
Effects Loop: Yes x 2
Preamp Out/Power Amp In: Yes x 2
Dimensions (W x H x D inches): 19 x 5.6 x 15.5
Weight: 42 Pounds
In the world of high-performance bass amps, Ampeg•s SVT amplifiers are in a class by themselves. In true Ampeg tradition, the SVT-4 PRO offers you more power, performance and flexibility than any other bass amplifier in its class.
SVT-4PRO offers an expansive palette of tonal options. The Frequency control allows you to select the center frequency for the Midrange control, giving you five distinct voicing options for the Midrange. And if that•s not enough, you can use the 9-Band Graphic EQ to fine-tune your sound•or use it to set up a footswitchable •second channel• with a volume boost for your bass solo.
SVT-4PRO is designed for the player who wants SVT tone and performance (with a few modern enhancements) in a convenient, high-powered, rackmount design. With a huge and diverse group of artist endorsements, including Michael Anthony (Van Halen), Tony Levin (Peter Gabriel/King Crimson), Steve Bailey (Bass Extremes), and far too many others to list here, the SVT-4PRO is a clear favorite among professionals. In the world of high performance bass amps, the Ampeg SVT-4PRO has what it takes to really define your sound.
* 1/4" and Neutrik Speakon® Outputs
* Input Peak LED
* Defeatable Optocoupler Limiters
* Variable Internal 24 dB/Octave Crossover
* Variable 0 - 7:1 Compressor
| Information vendeur : | Woodbrass |
| Emplacement géographique : | Nantes, France |
| Livraison : | Livraison Mondiale |
ARTICLES SIMILAIRES
