| K&M : 15213 Trumpet Stand 5-Leg
(754 comments)
Trumpet Stand- Highly stable- The tripod base can be stored in the cone- The entire stand ...(+) Trumpet Stand- Highly stable- The tripod base can be stored in the cone- The entire stand can therefore be stored in the bell of the trumpet- Rubber cone tip- Weight: 0.32 kg- H: 205 mm- Colour: black |
|
| K&M : 152/40 Flugelhorn Stand
(364 comments)
Flugelhorn StandThe 5-leg base provides guaranteed maximum stability for the instrument. T...(+) Flugelhorn StandThe 5-leg base provides guaranteed maximum stability for the instrument. The lower part can be pushed into the plastic cone saving space to be transported in the bell of the instrument.- Plastic peg with felt pads- Feet can be screwed into cones- Space-saving transport in the bell of the instrument- Weight: 0.42 kg- Height: 250 mm- Excellent quality- Colour: Black |
|
| K&M : 152/10 Trumpet Stand
(355 comments)
Trumpet Stand- Highly sturdy and stable- Your instrument is guaranteed optimum stability t...(+) Trumpet Stand- Highly sturdy and stable- Your instrument is guaranteed optimum stability thanks to the tripod base- The base unit can be stored in the plastic cone- The trumpet stand fits completely in the bell of the instrument- Ergonomic and frugal with space for easy transporting- Rubber cone tip- Support pad for the inner bell surface- Height: 190 mm- Weight: 0.24 kg- Colour: Black |
|
| Hercules Stands : HCHA-100 Mute Holder
(78 comments)
- Ring diameter: 1 x 47.5 mm, 2 x 63 mm and 1 x 74 mm- Dimensions folded: 100 x 250 mm- Lo...(+) - Ring diameter: 1 x 47.5 mm, 2 x 63 mm and 1 x 74 mm- Dimensions folded: 100 x 250 mm- Load capacity: 5 kg- Fits almost all microphone stands and music stands with a tube diameter of 8 - 30 mm- Holds the most common mutes for trumpet, cornet, trombone and French horn within reach- Rings padded with special foam for silent placement of mutes- Removable accessory tray |
|
| K&M : 157 Trumpet Holder
(210 comments)
Trumpet Holder- Improved model- Using a clamping screw, connect the music desks and the tr...(+) Trumpet Holder- Improved model- Using a clamping screw, connect the music desks and the tripods up to a tube diameter of 30 mm- Instrument holder with protective coating- Weight: 0.14 kg- Colour: Black |
|
| Hercules Stands : DS513B Multi Stand
(128 comments)
Multiple stands- Two pegs for trumpet or cornet- A peg for Flugelhorn- Weight: 1.2 kg- Col...(+) Multiple stands- Two pegs for trumpet or cornet- A peg for Flugelhorn- Weight: 1.2 kg- Collapsed size 320 x 190 mm |
|
| Hercules Stands : DS510B Trumpet Stand
(94 comments)Stand- For trumpet or cornet- Weight: 0.6 kg- Fold-out size 330 x 90 mm |
|
| KandM : 15910
(51 comments)
- Flexible holder for 3 mutes for clamping to tripod tubes with a diameter of 7 - 30 mm- D...(+) - Flexible holder for 3 mutes for clamping to tripod tubes with a diameter of 7 - 30 mm- Diameter shock absorbers: 2 x 80 mm, 1 x 60 mm- Rubber coated- Optional 60 mm and 95mm holder: Art.(478077) and (362965) |
|
| Millenium : Trumpet Wall Mount
(15 comments)- Colour: Black |
|
| Hercules Stands : DS410B TravLite Trumpet
(59 comments)Trumpet Stand- Can be placed inside the bell |
|
| KandM : 15214 Trumpet Peg w. Adapt.
(8 comments)- Polyamide cone with felt pads- Colour: Black- Includes cone adapter 15281 |
|
| ständerwerk : Trumpet Stand
- Base arches made of oiled oak- Sturdy hold thanks to two base arches- Modern curved desi...(+) - Base arches made of oiled oak- Sturdy hold thanks to two base arches- Modern curved design- Cones covered with soft flock- Optimal protection for the instrument- Dimensions (H x W): 27 x 30 cm- Handmade |
|
| Hercules Stands : DS501B Peg Trumpet /Cornet
(21 comments)
Attachment- For trumpet or cornet stands- Due to the height adjustment lever, the cone can...(+) Attachment- For trumpet or cornet stands- Due to the height adjustment lever, the cone can be adjusted to different bell sizes- The support surface is covered with plasticizer-free foam so that the lacquer is protected. |
|
| KandM : 15244 Flugelhorn Peg w. Adapt.
(6 comments)
- Especially for the Studiologic SL-Series- Allows 2 pedals to be used as buttons (left an...(+) - Especially for the Studiologic SL-Series- Allows 2 pedals to be used as buttons (left and middle pedal) and 1 pedal for continuous control (right pedal)- Connection via a single cable with standard stereo jack connector |
|
| Konig and Meyer : Rubber for Trumpet Stand Set - K&M Rubber for Trumpet Stand- K&M Nail for Trumpet Stand |
|
| Hercules : HCDS-410BP Trumpet Set
- Hercules Stands HCDS-410BP trumpet stand, TravLite, set with music stand and bag, consis...(+) - Hercules Stands HCDS-410BP trumpet stand, TravLite, set with music stand and bag, consisting of: HCDS-410B TravLite trumpet stand, height: 17.5 cm (6.9 "), base radius: 17 cm (6.7"), max. Load: 5 kg (11 lbs), dimensions folded: 18 x 7 x 7 cm (7.1 x 2.8 x 2.8 "), weight: 0.28 kg (0.62 lbs.) And New Folding Music Stand, music stand: 44 × 29 cm (17.3" × 11.4 "), height: 60 - 120 cm (23.6" - 47.3 "), base dimensions (radius): 30 cm (11.8"), max. Load: 2.5 kg (5.5 lbs.), Folded dimensions: 9 × 5 × 39 cm (3.6 "× 2" × 15.4 "), weight: 1.1 kg (2.43 lbs), including bag |
|
| ständerwerk : Trumpet/Flugel Horn Stand
- Base arches made of oiled oak- Sturdy hold thanks to two base arches- Modern curved desi...(+) - Base arches made of oiled oak- Sturdy hold thanks to two base arches- Modern curved design- Cones covered with soft flock- Optimal protection for the instrument- Dimensions (L x H x W): 73 x 29 x 34 cm- Weight: 640 g- Handmade |
|
| ständerwerk : Trumpet Double Stand
- Base arches made of oiled oak- Sturdy hold thanks to two base arches- Modern curved desi...(+) - Base arches made of oiled oak- Sturdy hold thanks to two base arches- Modern curved design- Cones covered with soft flock- Optimal protection for the instrument- Dimensions (L x H x W): 73 x 29 x 34 cm- Weight: 590 g- Handmade |
|
| ständerwerk : Flugel Horn Stand
- Base arches made of oiled oak- Sturdy hold thanks to two base arches- Modern curved desi...(+) - Base arches made of oiled oak- Sturdy hold thanks to two base arches- Modern curved design- Cones covered with soft flock- Optimal protection for the instrument- Dimensions (H x W): 27 x 30 cm- Handmade |
|
| ständerwerk : Flugel Horn Double Stand
- Base arches made of oiled oak- Sturdy hold thanks to two base arches- Modern curved desi...(+) - Base arches made of oiled oak- Sturdy hold thanks to two base arches- Modern curved design- Cones covered with soft flock- Optimal protection for the instrument- Dimensions (L x H x W): 73 x 29 x 34 cm- Weight: 690 g- Handmade |
|
(Change geographical area)
TRUMPET
