Darkglass DG-212 N Cover; protective cover for darkglass DG212N, robust and water resistant, padded

Housse de transport - Pour tête d'ampli Microtubes 900 - En nylon - Imperméable - Grande et petite poches extérieures - Sangles sac à dos réglables - Poignée robuste - Dimensions: 340 x 370 x 140 mm

Darkglass Harmonic Booster 2.0 Bass Pre; Effects Pedal for Electric Bass; a clean preamplifier that enhances attack and presence while sculpting the mids for a very percussive and aggressive character, tone-shaping engine which can be controlled with the Character knob; 3-band active equalizer with a semi-parametric mid control; suitable as a compliment to Distortion Pedals as well as a stand alone Bass Pre-Amp; Controls: Boost, Character, Mid Gain, Mid Freq., Bass, Treble; LED: Effect On; Footswitches: Effect Bypass; Connections: Input (1/4" Jack), Output (1/4" Jack); Power Supply connector: Barrel Connector 5.5 x 2.1 mm, center negative; powered by a 9 V DC Power Supply (included); suitable optional Power Supply: Item no. #409939; Dimensions (W x D x H): 64 x 111 x 43 mm (2,52" x 4,37" x 1,69"); Weight: 250 g (0,55 lbs); Made in Finland; Note: Battery operation is not supported

Pédale de distorsion - Pour basse électrique - Son gras et agressif - Contrôles: High-Pass de 100 à 1000 Hz, Low-pass de 50 à 500 Hz, Level, Drive, Mix, Mids - Entrée et sortie sur Jack 6,3 mm - Bloc d'alimentation 9 V DC avec polarité négative à l'intérieur optionnel non-fourni - Dimensions: 111 x 64 x 43 mm - Poids: 250 g

Pédale d'overdrive - Pour basse électrique - Toutes les caractéristiques de la B7K avec la possibilité de mieux définir le ton - Fréquence centrale commutable sur les basses fréquences de 1 kHz à 500 Hz, et sur les hautes fréquences de 3 kHz à 1,5 kHz - Délivre le son dynamique et percutant de la B3K plus un EQ 4 bandes et une sortie DI pour une plus grande polyvalence en studio et sur scène - Contrôles: Blend, Level, Drive, Low, Low Mids, Hi Mids, Treble - Boutons: 1 kHz / 500 Hz, 3 kHz / 1,5 kHz - Interrupteur de masse - Commutateurs: Attack, Grunt - LED de statut Effect On - Commutateur au pied Effect Bypass - True Bypass - Entrée et sortie sur Jack 6,3 mm - Sortie DI sur Jack stéréo 6,3 mm - Sortie parallèle sur Jack 6,3 mm - Consommation: 20 mA - Aucune possibilité de fonctionnement avec pile - Nécessite un bloc d'alimentation optionnel non-fourni (N° d'article 409939) - Dimensions: 106 x 120 x 45 mm - Poids: 350 g - Fabriquée en Finlande

Réglages : Blend, level, drive, low, lo mids, hi mids, treble, switch attack (cut / boost / flat), switch grunt (Raw / thin / fat), switch 500hz / 1khz, switch 1.5khz / 3khz.

Darkglass Microtubes B7K Ultra v2 Ltd. "The Squid" Bass Overdrive, effects pedal, Art Design by Ignacio Bazan Lazcano; all the versatility and sonic possibilities of the first version plus: single user loadable cabinet simulation impulse response, micro-USB B port to connect to PC/Mac, 3.5mm headphone output with cabinet simulation, balanced XLR output with switchable cabinet simulation, controls: Drive - Level - Blend - Master - Treble - Hi Mids - Lo Mids - Bass, push buttons: Cab Sim- Ground Lift, switches: Attack - Grunt - Lo Mids (500 Hz/1 kHz/250 Hz) - Hi Mids (1,5 kHz/3 kHz/750 Hz), LED: Effect On - Distortion, footswitches: Effect Bypass - Distortion, connections: input (1/4" jack) - output (1/4" jack) - Direct output (XLR) - Aux Intput (3,5 mm Jack) - headphone output (3,5mm Jack) - PSU input (5.5 x 2.1 mm barrel connector - center negative), current draw: 110 mA, powered by a 9 V DC power supply (not included), suitable optional power supply: item no. #409939, no battery operation, True Bypass, dimensions (W x D x H): 125 x 96 x 57 mm (4,92" x 3,78" x 2,24"), weight: 430 g (0,95 lbs), made in Finland

Pédale d'effets - Pour basse électrique - Avec entrée Aux - 2 circuits de saturation - Plage dynamique élevée - EQ graphique actif 6 bandes - Sortie casque - Sortie DI symétrique avec émulation de haut-parleur à réponse impulsionnelle numérique commutable - Contrôles: Mod, Blend, Level, Drive, 6 Band Eq. - Boutons-poussoirs: Growl, Bite, Ground Lift, Cab Sim - LED de statut Effect On/Off - Commutateur au pied Effect Bypass - Entrée et sortie sur Jack 6,3 mm - Consommation: 30 mA - Aucune possibilité de fonctionnement avec pile - Nécessite un bloc d'alimentation optionnel non-fourni (N° d'article 409939) - True Bypass - Dimensions: 125 x 57 x 96 mm - Poids: 430 g

Darkglass DG112N Bass Cab; Full sound combined with light weight due to neodymium magnets; Equipped With: 1 x 12" Custom Eminence Neodymium speaker/s; HF Driver: 1" 1" P.Audio HF Driver w/ Horn (adjustable); Cabinet Construction: ported; Power Handling: 500 Watts; Impedance: 8 Ohms; Connectors: 2 x Combi Speaker Twist/1/4" Jack; Housing Material: Paulownia; Baffle Material: Baltic Birch; frontloaded; Dimensions (W x H x D): 459 x 1182 x 435 mm; (18,1" x 46,5" x 17,1"); Weight: 12,5 kg (27,6 lbs); Colour: Carbon

The Alpha·Omega 500 is a 500W amplifier equipped with an all-analog preamplifier, two distinct distortion circuits (Alpha and Omega), a custom-designed Darkglass high-efficiency class D Module, an ultra-quiet graphic equalizer, and a digital impulse-response cabinet emulator for DI outputs or headphones. Specifications Front Panel Features Input Use this jack to connect your instrument via a standard ¼ mono cable. Passive/Active Use this push-button switch to change from passive to active mode. If your bass is active it can have a hotter signal making the amp to distort early (feel free to use if such additional distortion is desired). Distortion Use this push button to turn on or off the Alpha·Omega Engine to add natural compression, organic harmonic enhancement, and saturation ranging from mild overdrive to high gain bass rage. The Alpha·Omega Engine operates before the clean section (you can therefore use the 6-Band Active EQ for additional tone shaping). Bite Boosts high mids (2.8kHz) for additional presence and definition. Growl Shelving Bass Boost for a fatter tone and increased low end saturation. Compression This knob controls the amount of dynamic compression added to the Alpha·Omega Engine. The make up gain is adjusted automatically. The compression can be turned off or assigned using the Darkglass Suite. Drive This knob controls the amount of distortion that the Alpha·Omega Engine will deliver. It will change from a soft, warm overdrive to a massive and modern distortion sound. Level Use this knob to control Alpha·Omega Engine s output volume. Blend Use this knob to mix between the Clean signal and the DIstortion signal (Alpha·Omega Engine). Mod Selects or mixes between the two distinct distortion circuits: Alpha is punchy, tight with a lot of definition, whereas Omega is simply brutal and raw. Bass -12dB at 80Hz. Use this knob to change the low-end content of the signal. Mids -12dB at 250, 500, 1.5K and 3Khz. This graphic EQ control the mid content of the signal. Treble -12dB at 5kHz. Use this knob to change the high content of the signal. Master Use this knob to control the overall volume of the amplifier. Mute Use this push button to mute the amplifier. WARNING · No user-serviceable parts inside the amplifier. Do not open the amp. · Never use the amp at a high moisture environment or near liquids. · The Alpha·Omega 500 can deliver more than 115 dB of power. Exposure to this level of sound can damage your hearing. Use proper hearing protection if you will be exposed. · The Alpha·Omega can deliver more than 500 Watts. Be sure that your speaker cabinet is able to deliver that power. · Do not cover the vent holes. The Fan and vent holes are part of the cooling system of the amp. Covering the vent holes can damage the power amp by overheating it. · Don t use an instrument cable as speaker cable. An instrument cable is not designed to deliver the type of power signals sent from the amplifier to the speaker. Back Panel Features Speaker Output Use this connector to connect the amplifier to your cabinet. This Speakon combo jack allows for either Speakon or ¼ speaker cable operation. WARNING: Do not use an instrument cable with this jack. Using an instrument cable can damage your amplifier. Send Use this output to send the signal to effects pedals. Return Use this input to receive the signal from effects pedals. Master volume control is after this input. Ground Lift Use this control to lift the ground of the DI XLR output. If you are experiencing ground noise in your DI signal try changing the setting of this control. DI Output Use this connector to send your signal to the console, mic preamp, interface, etc. Both signals are available (Bypass and the amp signal with cabinet simulation) and are switched from the cab select switch. USB The USB connector allows you to use the Darkglass Suite to load different cabinet impulses or change different parameters on your amp. Headphone Output Connect your Headphones and enjoy the impulse based cabinet emulation. AUX IN Use this connector to provide to the Headphone output music from your laptop, cellphone, mp3 player, etc. Cabinet Select Use this switch to navigate between the 3 different cabinet impulses or the clean DI signal. Footswitch The Intelligent Footswitch is a proprietary digitally controlled device that allows you to remotely engage and disengage the Alpha·Omega Engine. You can also hold the footswitch to Mute the amplifier. You can also hold the footswitch to Mute the amplifier. The distortion push button will remain operational with the Intelligent Footswitch plugged in.. · You can use a regular mono instrument cable to connect the amplifier to the footswitch. · You must remove the cable from the footswitch jack in the rear panel if you want to control the amp from the front panel. AC Socket Use this connector to feed electric power to the amplifier. 100 - 230 VAC, 50Hz-60. AC Power ON/OFF Use this Switch to release the audio energy from your bass.