Schagerl APREDATO 15E4 SILVER mouthpiece for trumpet, inner diameter: 16,92mm, bore: 3,88mm, deep cup, silver plated, to fill the mouthpiece, open the bell up to the stop screw (counterclockwise) and fill completely with water, now swivel mouthpiece (backbore and bell should touch the worktop) and drain excess water, screwing clockwise while maintaining the angle bell. WATCH OUT! Do not tighten the bell as far as it will go, there should be a small gap between the rim and the bell, the water should be renewed regularly

Schagerl APREDATO 1 1/4C SILVER mouthpiece for trumpet, inner diameter: 17,00mm, bore: 3,66mm, medium deep cup, silver plated, to fill the mouthpiece, open the bell up to the stop screw (counterclockwise) and fill completely with water, now swivel mouthpiece (backbore and bell should touch the worktop) and drain excess water, screwing clockwise while maintaining the angle bell. WATCH OUT! Do not tighten the bell as far as it will go, there should be a small gap between the rim and the bell, the water should be renewed regularly

Schagerl APREDATO 7C SILVER mouthpiece for trumpet, inner diameter: 16,20mm, bore: 3,66mm, medium deep cup, silver plated, to fill the mouthpiece, open the bell up to the stop screw (counterclockwise) and fill completely with water, now swivel mouthpiece (backbore and bell should touch the worktop) and drain excess water, screwing clockwise while maintaining the angle bell. WATCH OUT! Do not tighten the bell as far as it will go, there should be a small gap between the rim and the bell, the water should be renewed regularly

Schagerl APREDATO Gileno Santana SILVER mouthpiece for trumpet, inner diameter: 16,85mm, bore: 3,56mm, very shallow cup, silver plated, to fill the mouthpiece, open the bell up to the stop screw (counterclockwise) and fill completely with water, now swivel mouthpiece (backbore and bell should touch the worktop) and drain excess water, screwing clockwise while maintaining the angle bell. WATCH OUT! Do not tighten the bell as far as it will go, there should be a small gap between the rim and the bell, the water should be renewed regularly

Schagerl APREDATO SG3 SILVER mouthpiece for trumpet, inner diameter: 17,00mm, bore: 3,70mm, medium cup, silver plated, to fill the mouthpiece, open the bell up to the stop screw (counterclockwise) and fill completely with water, now swivel mouthpiece (backbore and bell should touch the worktop) and drain excess water, screwing clockwise while maintaining the angle bell. WATCH OUT! Do not tighten the bell as far as it will go, there should be a small gap between the rim and the bell, the water should be renewed regularly

Schagerl APREDATO 3C SILVER mouthpiece for trumpet, inner diameter: 16,30mm, bore: 3,66mm, medium deep cup, silver plated, to fill the mouthpiece, open the bell up to the stop screw (counterclockwise) and fill completely with water, now swivel mouthpiece (backbore and bell should touch the worktop) and drain excess water, screwing clockwise while maintaining the angle bell. WATCH OUT! Do not tighten the bell as far as it will go, there should be a small gap between the rim and the bell, the water should be renewed regularly

Schagerl APREDATO BG1 SILVER Mundstück für Trompete, Innendurchmesser: 16,72mm, Bohrung: 3,80mm, sehr tiefer Kessel, versilbert, zum Füllen des Mundstückes die Glocke bis zur Anschlagschraube (gegen den Uhrzeigersinn) öffnen, und vollständig mit Wasser füllen, nun das Mundstück schwenken (Schaft und Glocke sollen die Arbeitsplatte berühren) und überflüssiges Wasser auslaufen lassen, unter Beibehaltung des Winkels Glocke im Uhrzeigersinn wieder verschrauben. ACHTUNG! Glocke nicht bis zum Anschlag festziehen, es sollte ein kleiner Spalt zwischen Rand und Glocke bestehen bleiben, das Wasser sollte regelmäßig erneuert werden

Schagerl APREDATO BG2 SILVER mouthpiece for trumpet, inner diameter: 16,72mm, bore: 3,80mm, medium deep cup, silver plated, to fill the mouthpiece, open the bell up to the stop screw (counterclockwise) and fill completely with water, now swivel mouthpiece (backbore and bell should touch the worktop) and drain excess water, screwing clockwise while maintaining the angle bell. WATCH OUT! Do not tighten the bell as far as it will go, there should be a small gap between the rim and the bell, the water should be renewed regularly

Schagerl APREDATO Hans Gansch GOLD mouthpiece for trumpet, inner diameter: 17,14mm, bore: 3,88mm, very deep cup, gold plated, to fill the mouthpiece, open the bell up to the stop screw (counterclockwise) and fill completely with water, now swivel mouthpiece (backbore and bell should touch the worktop) and drain excess water, screwing clockwise while maintaining the angle bell. WATCH OUT! Do not tighten the bell as far as it will go, there should be a small gap between the rim and the bell, the water should be renewed regularly

Schagerl APREDATO 1C GOLD mouthpiece for trumpet, inner diameter: 17,00mm, bore: 3,66mm, medium deep cup, gold plated, to fill the mouthpiece, open the bell up to the stop screw (counterclockwise) and fill completely with water, now swivel mouthpiece (backbore and bell should touch the worktop) and drain excess water, screwing clockwise while maintaining the angle bell. WATCH OUT! Do not tighten the bell as far as it will go, there should be a small gap between the rim and the bell, the water should be renewed regularly