After Later Audio Fuse; Eurorack module; Meta-Modulator for mixing and blending of two audio signals related to 9 different algorithms: Crossfade, Crossfolding, Diode ring-modulation, digital ring-modulation. XOR modulation and 3 Vocoder modes; Timbre control knob for modulation intensity between input 1 & 2; zwo audio inputs with level control knobs; CV control over algorithm selection and timbre; switchable internal modulation oscillator; power consumption: 110mA (+12V) / 5mA (-12V); width: 10 HP; depth: 25 mm

Resonator with 3 special models- "Modal Resonator" emulates the resonance properties of sheet metal, strings, membranes and tubes- "Sympathetic Strings" models the resonance behavior of several strings in an instrument- "Modulated / Inharmonic Strings" models the behavior of a string that is struck, bowed or plucked using strongly feedback delays with a very short delay time- Resonator models can be excited with audio signals or internal noise pulses- Up to 4 virtual strings can be triggered overlapping- CV input with bipolar attenuator for all 5 parameters- Current requirement: 110mA (+12V) / 5mA (-12V)- Width: 14 HP- Depth: 25mm

Chaotic synthesizer voice- 2 VCO's- Each with controls for pitch, Rungler intensity, pitch CV input with attenuator and outputs for triangle and pulse- Rungler section for generating stepped control voltages with adjustable chance, rate, number of steps (8, 16, 127), gate inputs for steps and rate- Clock input- Signal output (range: -5V to +5V) and XOR output- Mixer section with input for external signals- Multimode filter with controls for cutoff, resonance, Rungler intensity,- CV input with attenuator and outputs for high-pass, band-pass and low-pass- Current requirement: 65 mA (+12 V) / 60 mA (-12 V)- Width: 20 HP- Depth: 25mm

Contact microphone and envelope follower- Contact microphone built-in in the front panel reacts to triggers, rubbing, vibrations etc.- Amplifier with +40dB gain- Hi-Z input for external contact microphones- Audio output- Outputs for envelope follower and gate signal- Envelope follower response time and gate detector threshold adjustable via jumper- Power consumption: 5mA (+12V) / 5mA (-12V)- Width: 4 U- Depth: 25 mm

After Later Audio Cloaks; Eurorack module; 4-channel VCA; response curve adjustable from exponential to linear for each channel; CV offset control for each channel; outputs are daisy-chained to output 4 for use as a mixer; DC-coupled inputs work for audio and CV signals; bi-color LED per channel shows signal level and polarity; Gain range: maximum gain of 2 (+6dB) in linear operation, 100 (+40dB) in exponential operation; power consumption: 50mA (+12V) / 50mA (-12V); width: 10 HP; depth: 25mm

Texture synthesizer- Granular stereo audio processor- Controls for position, size, pitch, input level, density, texture and blend- Audio buffer with up to 8 seconds recording time and 4 memory locations- Granular synthesis extracts grains from the audio buffer- Adjustable grain parameters such as readout type, grain size and count- Transposition (+/- 2 octaves with V/oct. input)- Grain envelope- Additional parameters: Dry/Wet mix (with CV input), random panning, feedback and reverb amount- CV inputs for all granular parameters- Trigger and freeze input- Stereo audio input and output- Current consumption: 120 mA (+12 V) / 10 mA (-12 V)- Width: 18 HP- Depth: 25 mm

After Later Audio Enigma; Eurorack module; expander module for Alan 3U (item 571729) and Benjolin V2 (item 558008); second CV sequencer track derived from the main module; 5 control knobs for editing CV values; CV output; power consumption: 5mA (+12V) / 0mA (-12V); width: 4 HP; depth: 25mm

After Later Audio Dice; Eurorack module; Random Gate and CV Generator; t-section with 3 gate/trigger outputs, driven by internal or external clock; 2 gate/trigger outputs with selectable random algorithms (random coin toss, random ratcheting, random beats) and adjustable jitter; X-section with 3 channels of random voltages, driven by the outputs of the t-section or external clock; random voltages can be smooth, stepped or quantised; memory locations for 6 scales; Spread control, Bias control and 3 selectable modes influence the generated random voltages; Y-output for an independent fluctuating random voltage; Deja Vu section: looper for past events with the possibility to add new random events to the data loop; CV inputs for all parameters; power consumption: +80mA (+12V) / -20mA (-12V); width: 18 HP; depth: 25mm

Subharmonic generator- Separate sections for generating odd and even subharmonics- 4 Controls per section for subharmonics, signal input and output- Mix output with level control and odd/even crossfader with CV input- Reset button and trigger input- Can be combined with other modules of the COCO system (Valley, Brooks, Cascades)- Two toggle switches for distributing pitch and sync signals between oscillators within a COCO system as well as selectable clock source per section- Power consumption: 35mA (+12V) / 25mA (-12V)- Width: 10 U- Depth: 25 mm

Compact through-zero oscillator, pitch control and three-position switch for tuning over 10 octaves- Switchable LFO mode- FM input with attenuator- Hard and soft sync inputs- Outputs for square, sine, sawtooth and triangle- Can be combined with other modules of the COCO system such as Canyon Valley Cascades- Current requirement: 30mA (+12V) / 15mA (-12V)- Width: 4 HP- Depth: 25mm