| ADJ : Mega TriPar Profile Plus (339 comments)
Suitable as wall-wash and for lighting stages, events and parties- Can be placed directly ...(+) Suitable as wall-wash and for lighting stages, events and parties- Can be placed directly on the floor without a mounting bracket or integrated into a scaffolding element, since the current and DMX inputs and outputs are attached on the side- Soft RGB + UV colour mixing (fast or slow colour change)- Long-life LEDs - estimated 50,000 operating hours- Includes mounting bracket for mounting on scaffold elements, the wall or on the floor- Lamp: 5x 4-W 4-in-1 Quad-LEDs- 5 DMX channel modes: 4, 5, 6, 9 or 10 channel modes- 5 Operating modes: Auto run mode (16 colour change modes, 16 colour fade modes & 1 combi mode), Music control mode (16 music-controlled programmes), RGB + UV dimmer mode, Static colour mode (64 colours) and DMX control- Digital DMX display with 4-button menu for easy navigation- Stand-alone or master/slave configuration- Beam angle: 40 degrees- 5 Selectable dimmer curves- 64 Integrated colour macros- DMX-512 Protocol- Colour strobe effect- Connection via 3-pin DMX cable- Electronic dimming: 0-100%.- Flicker-free- Power consumption: Max. 21 W- Side IEC input and output for connection of up to 30 devices- Compatible with ADJ's LED RC2 wireless IR remote control with up to 10m range (not included)- Automatic switching power supply: AC 100-240 V, 50/60 Hz- Dimensions (L x W x H): 225 x 220 x 85 mm- Weight: 1.23 kg |
|
| ADJ : Bubbletron GO (59 comments)
Battery powered and rechargeable, in order to use bubble effects even in places where no p...(+) Battery powered and rechargeable, in order to use bubble effects even in places where no power outlet is available. (E.g. at weddings at the church or the town hall)- Powerful high-speed blower creates hundreds of bubbles per minute- Can be used with most commercial soap liquids- Ideal for bands, DJs, clubs, entertainer and as a stage effect for small to medium size stages- Resistant plastic housing with easy-to-reach fluid tank- Large high-speed fan for fast rising of bubbles- On / off switch on the rear panel- Radio remote control for the function on / off- Carrying and mounting handle- Power: 24 W (120 V), 10 W (230 V)- Fluid consumption. 1 litre every 50 min (120 V), 1 litre every 90 minutes (230 V)- Automatic switching power supply: AC 120 - 230 V, 50 / 60Hz (charging unit: DC12V 1000mA)- Battery charging time: 6 hours- Battery life: 5 hours (full charge)- Dimensions (L x W x H): 352 x 176 x 209 mm- Weight: 2 kg |
|
| ADJ : VF Snow Flurry HO (24 comments)
Powerful snow machine with 1250 W- Spray range approx. 8 to 10 m- Selection switch for hig...(+) Powerful snow machine with 1250 W- Spray range approx. 8 to 10 m- Selection switch for high/low output volume- Control via DMX or the supplied Timer remote control- Compatible with UC IR and Airstream IR by ADJ (sold separately, not included)- Shutdown at low snow fluid level to protect the pump- Level indicator for snow fluid- Internal tank with 2.3 l capacity- Dimensions with bracket: 510 x 316 x 349 mm- Dimensions (without bracket): 510 x 316 x 268 mm- Weight: 8 kg |
|
| ADJ : Fog Fury Jett (187 comments)
With 12 x 3 W RGBA LEDs for creating colours in the fog- Power: 650 Watt- High performance...(+) With 12 x 3 W RGBA LEDs for creating colours in the fog- Power: 650 Watt- High performance pump for optimal output- Electronic Thermo Sensing Technology by ADJ- Automatic shutdown to protect the pump when there is no fog fluid left in the tank- Special heating element uses oil as a heat conductor in order to prevent clogging in the pipe- 3 Operation modes: Manual, remote control or DMX control (1/2/3/5/7 DMX channels)- 4-Button DMX LCD display on rear panel- Heating time: 9 Minutes- Fog emission: 566 m³ per minute- External fog fluid tank: 3 l canister- The tank can be mounted on the front or back of the unit so that the machine points upwards or downwards- Use only high-quality water-based fog fluid- Display on the back to show low level of fog fluid- DMX input and output: 3-Pin XLR- Light source: 12 x 3 W LEDs (3 red, 3 green, 3 blue and 3 amber LEDs)- Heating element: 650 W- Power consumption: 680 W (full power mode)- Nominal voltage: 230 V- Power connector: IEC- Safety eyelet on the device- Dimensions (L x W x H): 397 x 302 x 191 mm- Weight: 7.1 kg- FFJWR wireless remote control by ADJ included |
|
| ADJ : BubbleTron (137 comments)
Portable, powerful bubble machine creates hundreds of bubbles per minute- Resistant plasti...(+) Portable, powerful bubble machine creates hundreds of bubbles per minute- Resistant plastic housing with easy-to-reach fluid tank- Large high-speed fan for fast rising of bubbles- On / off switch on the rear panel- Hand Controller (25-ft./8-m-Kabel) for the function on / off- Carrying and mounting handle- Works with virtually all commercial soap bubbles fluids- Power consumption: 24 W- Fluid consumption: 1 liter per 2 hours- Switching Power Supply: AC 120-230V, 50 / 60Hz- Dimensions (L x W x H): 352 x 176 x 209 mm- Weight: 2 kg |
|
| ADJ : Entour Snow (3 comments)
Professional foam machine for water-based snow fluids- Output distance: approx. 10 - 12 m-...(+) Professional foam machine for water-based snow fluids- Output distance: approx. 10 - 12 m- Control via DMX (1/3/5 channels)- Built-in timer- DMX in- and output: XLR three- and five-pin- Power input: Power Twist- Power consumption: max. 1250 W- Fluid consumption: 500 ml/min- External fluid canister 5.6 l- Dimensions: 550 x 376 x 439 mm- Weight: 13.5 kg- Includes mounting bracket |
|
| ADJ : mydmx GO (84 comments)
With app for DMX lighting control for iPad or Android-Tablet- 256 DMX channels- Compatible...(+) With app for DMX lighting control for iPad or Android-Tablet- 256 DMX channels- Compatible with Ableton-Live- DMX via WLAN and USB- Library of more than 15,000 lighting devices- Manual channel control- Calibration of the light position- 21 Automatic effects- 50 User-defined presets- Control of Speed / Size / Shift / Fade / Fan Control- Master and sub-master- Colour wheel |
|
| American DJ (ADJ) : Ikon Profile
With a white 32 W LED- 4 DMX channels- 5 dimmer curves- Manual focus and zoom- Beam angle:...(+) With a white 32 W LED- 4 DMX channels- 5 dimmer curves- Manual focus and zoom- Beam angle: 15 ° -40 °- 4 Shutter plates- Including one glass and 4 metal gobos (diameter: 26.8 mm)- Colour Filter Holder- Switching power supply: 100-240 V, 50/60 Hz- Power consumption: 44 W- Dimensions (L x W x H): 408 x 150 x 226 mm- Weight: 2.7 kg |
|
| ADJ : BubbleTron Bundle (7 comments)
ADJ BubbleTron Bubble Machine ADJ Bubble Juice for 5 ltr. Portable, powerful bubble machin...(+) ADJ BubbleTron Bubble Machine ADJ Bubble Juice for 5 ltr. Portable, powerful bubble machine creates hundreds of bubbles per minute-
Resistant plastic housing with easy-to-reach fluid tank-
Large high-speed fan for fast rising of bubbles-
On / off switch on the rear panel-
Hand Controller (25-ft./8-m-Kabel) for the function on / off-
Carrying and mounting handle-
Works with virtually all commercial soap bubbles fluids-
Power consumption: 24 W-
Fluid consumption: 1 liter per 2 hours-
Switching Power Supply: AC 120-230V, 50 / 60Hz-
Dimensions (L x W x H): 352 x 176 x 209 mm-
Weight: 2 kg |
|
| American DJ (ADJ) : Pro Event Table Bag Heavy Duty (19 comments)
ADJ Pro Event Table Bag Heavy Duty; is a carrying bag accessory for the Pro Event Table II...(+) ADJ Pro Event Table Bag Heavy Duty; is a carrying bag accessory for the Pro Event Table II / MB. Made of high grade Cordura; High class and firm finish ensure a high lifetime; Padded fabric for extra high protection; Heavy duty double zipper; Inside straps to secure the load; Easy to carry, due to double straps; Made in the EU; |
|
| American DJ (ADJ) : DMX Operator 384 (45 comments)
12 Devices with up to 32 DMX channels each- Up to 240 programmable scenes on 30 scene bank...(+) 12 Devices with up to 32 DMX channels each- Up to 240 programmable scenes on 30 scene banks- 12 Programmable chases- 8 Control faders x 4 channel banks- Assignable joystick- Speed and fade controls- Built-in microphone or RCA audio input with line level for music control- MIDI input for scene, chase or blackout triggers- MIDI OUT socket- USB connection for use as a MIDI controller e.g. with MyDMX3.0 full version- TAP-SYNC function to adjust the chase speed to the music beat- DIN5 control output and trigger button for fog machines (for use with certain ADJ fog machines)- RS-232 input- Blackout button- Dimensions: 483 x 135 x 82 mm- Weight: 2.95 kg |
|
| ADJ : LED Color Tube II (257 comments)
Low energy consumption- Extremely low heat generation- Long LED life: 30,000 operating hou...(+) Low energy consumption- Extremely low heat generation- Long LED life: 30,000 operating hours- Incl. wireless remote control for controlling the colours, mounting brackets for the wall, and a base to mount the tube vertically- The lighting effect is at the best of its strengths when used at parties, for mobile performers, as holiday lighting, lighting of architecture, shops, clubs, and along with other LED pixel tube 360 devices- 40" / 1000 mm LED colour tube- Tubing is made of UV-resistant polycarbonate- 32 Bright RGB TRI LEDs (3-in-1)- 15 LED colours + white- Rainbow colour effect- With a user-friendly, wireless remote control for manual colour change, automatic colour change, flash, rainbow effect, slow to fast colour strobe effects, on/off, and a power supply- Light source: 32 x 0.2 W- Three-colour RGB LEDs- Power consumption: 6 W in total (when all LEDs are at full power)- Auto sensing power supply: DC 100 V / 60 Hz - 240 V / 50 Hz- Dimensions (L x W x H): 1016 x 50 x 50 mm (40" x 2" x 2")- Weight: 2 lbs / 1 kg |
|
| American DJ (ADJ) : Entour Cyclone (7 comments)
Air flow: 30 m³/min- Housing with folding clamp and 360° tilt angle- Fan speed manually ...(+) Air flow: 30 m³/min- Housing with folding clamp and 360° tilt angle- Fan speed manually controlled by rotary knob: 0 - 100 %- Number of DMX channels: 1 / 2- DMX connection: 3 Pin XLR In/Output- 6.35 mm Jack input for connecting an optional remote control- Power connector: Power twist in/ output- Power consumption: 130 W- Dimensions: 350 x 422 x 131 mm- Weight: 8.56 kg |
|
| ADJ : Laser Emergency Switch (16 comments)
Connects between the wall socket and the power supply of the device to switch off the lase...(+) Connects between the wall socket and the power supply of the device to switch off the laser in case of malfunction- Cable: 3G0 / 75 mm²,- Length: approx. 7.0 m / 5.75 + 1.25 m |
|
| ADJ : Pinspot LED II (63 comments)
Powerful 3W LED Pinspot with 3º beam angle- Very compact and robust plastic housing- Extr...(+) Powerful 3W LED Pinspot with 3º beam angle- Very compact and robust plastic housing- Extremely durable 3 W LED light bulb (50,000 hours)- Minimal generation of heat- Very low power consumption- Stable mounting bracket- Multi-voltage power supply 90-240V 50/60 Hz- Dimensions: 145 x 75 x 50 mm- Weight: 0.5 kg- Includes 12º lens |
|
| ADJ : PRO-ETBS ProEventTable Bag II (134 comments)
Suitable for the Pro Event Table II (Art. 427915 - not included)- Provides optimum protect...(+) Suitable for the Pro Event Table II (Art. 427915 - not included)- Provides optimum protection against dust and scratches- Carrying straps for easy transport |
|
| ADJ : BubbleTron XL
High output- Creates hundreds of bubbles per minute- Resistant plastic housing with easy-t...(+) High output- Creates hundreds of bubbles per minute- Resistant plastic housing with easy-to-reach 2 liter fluid tank- Fluid consumption: 40ml / minute- Large high-speed double fan for fast rising of bubbles- On / off switch on the rear panel- Non-removable hand controller (3-m-cable) for the function On / Off- Carry handle- Works with virtually all commercial soap bubbles fluids- Power Supply: AC 120 / 50Hz or 230 / 60Hz- Power consumption: 37W @ 120V / 14W @ 230V- Dimensions (L x W x H): 359 x 266 x 278 mm- Weight: 3.7 kg |
|
| American DJ (ADJ) : Fog Fury Jett Bundle
ADJ Fog Fury Jett DMX Fog Machine with Vertical Output-
With 12 x 3 W RGBA LEDs for creat...(+) ADJ Fog Fury Jett DMX Fog Machine with Vertical Output-
With 12 x 3 W RGBA LEDs for creating colours in the fog-
Power: 650 Watt-
High performance pump for optimal output-
Electronic Thermo Sensing Technology by ADJ-
Automatic shutdown to protect the pump when there is no fog fluid left in the tank-
Special heating element uses oil as a heat conductor in order to prevent clogging in the pipe-
3 Operation modes: Manual, remote control or DMX control (1/2/3/5/7 DMX channels)-
4-Button DMX LCD display on rear panel-
Heating time: 9 Minutes-
Fog emission: 566 m³ per minute-
External fog fluid tank: 3 l canister-
The tank can be mounted on the front or back of the unit so that the machine points upwards or downwards-
Use only high-quality water-based fog fluid-
Display on the back to show low level of fog fluid-
DMX input and output: 3-Pin XLR-
Light source: 12 x 3 W LEDs (3 red, 3 green, 3 blue and 3 amber LEDs)-
Heating element: 650 W-
Power consumption: 680 W (full power mode)-
Nominal voltage: 230 V-
Power connector: IEC-
Safety eyelet on the device-
Dimensions (L x W x H): 397 x 302 x 191 mm-
Weight: 7.1 kg-
FFJWR wireless remote control by ADJ included ADJ Fog Juice CO2 - 5 Liter High-Quality Fog Fluid for CO2 Effects-
This specially developed fog fluid creates a CO2 effects like in large clubs and discos-
At an ambient temperature of about 20° C, the fog evaporates in a few seconds-
It is especially suitable for stage and show effects-
The fluid can be operated with all common fog machines-
ADJ recommends the use of stronger machines to create a convincing boost effect-
Based on water and glycol-
No risk to health-
Leaves no residue-
Canister with 5 L |
|
| American DJ (ADJ) : BubbleTron XL Bundle
|
|
| ADJ : MyDMX 3.0
512 DMX-Channels- Extensive fixture-profile library- SSL2 Profile editor and support- Drag...(+) 512 DMX-Channels- Extensive fixture-profile library- SSL2 Profile editor and support- Drag and drop effects generator- Play back of multiple scenes simultaneously- Arrangement of scenes in groups- Sound to light with BPM audio analysis and pulse analysis- Live snapshots- Live scene dimming and scene speed control- Standalone backup storage- BPM Tap- Master fader- Scenes button configurable as flash button- Blind processing - modify scenes without outputting DMX- Improved multi-pan and tilt support- With Windows and Mac installers downloading the latest SSL library after installation via an existing internet connection- "Cloud-search profiles" look for the latest and best fixture-profiles from the program itself, no scanning of Dropbox anymore- Users can select multiple steps in a scene and change a single channel parameter, without altering the rest of the channels- "Maintenance" application that is installed with the program looks for component updates or new versions of the software- Large optimisations and stability improvements- Not compatible with ARM-based Windows tablets (Intel only)- The myDMX 3.0 interface runs with the myDMX 2.1 software in full mode |
|