| Ampeg : SVT-810E (29 comments)
Low end woofer- Equipped with 8x 10" Eminence speakers- Power rating: 800 Watt RMS- Jack a...(+) Low end woofer- Equipped with 8x 10" Eminence speakers- Power rating: 800 Watt RMS- Jack and speaker twist socket- Max. SPL: 130 dB- Impedance: 4 Ohm - switchable to 2 x 8 Ohm bi amp/ stereo- Frequency range: 40 Hz - 5 kHz- Dimensions: 121.92 x 66.04 x 40.64 cm- Weight: 63.5 kg |
|
| Ampeg : V-4B Bass Head (49 comments)
All-tube amplifier- Power: 100 W- Preamp tubes: 2 x 12AX7- Driver tubes: 1 x 12AX7 and 1 x...(+) All-tube amplifier- Power: 100 W- Preamp tubes: 2 x 12AX7- Driver tubes: 1 x 12AX7 and 1 x 12AU7- Power amp tubes: 4 x 6L6GC- Vintage rocker switches- Chassis suspension system- 3-Band EQ: Bass, mids and treble- 3 Mid-range frequencies per rocker switch- Ultra hi/lo boost- Speaker connectors: 1 x 8 Ohm, 2 x 4 Ohm and 2 x 2 Ohm- Balanced direct out with ground lift- Power amp in / preamp out- -15 dB input- Slave output to terminals on additional amplifiers- Dimensions (W x H x D): 610 x 279 x 279 mm- Weight: 18.6 kg- Classic V-4B - Ampeg Black Line design- Matching case: Art.318733 (not included in delivery) |
|
| Ampeg : Heritage SVT-810AV (2 comments)
Suitable for the Heritage 50th Anniversary top by Ampeg- Drivers: 8x 10 Custom U.S. made E...(+) Suitable for the Heritage 50th Anniversary top by Ampeg- Drivers: 8x 10 Custom U.S. made Eminence speakers- Power handling: 800 W at 4 ohms (mono) or 2 x 400 W at 8 ohms (stereo)- Max. sound pressure: 130 dB- Frequency range: 40 - 5.000 Hz- 15 mm poplar plywood cabinet- Connection: Jack and speaker twist- Finish: Black with blue/silver front cover- Dimensions: 122 x 66 x 41 cm- Assembled in the USA |
|
| Ampeg : AFS2 Footswitch (4 comments)
2-Position footswitch to use with any top or combo that includes switchable functions like...(+) 2-Position footswitch to use with any top or combo that includes switchable functions like mute, EQ or SGT on/off- Cable length: 3 m |
|
| Ampeg : SVT 50th Heritage Sp.Ed. (3 comments)
50th Heritage Special Edition- Channel 1 corresponds to the 1969 version- Channel 2 is bas...(+) 50th Heritage Special Edition- Channel 1 corresponds to the 1969 version- Channel 2 is based on the sound of the mid 70s SVT models- Power: 300 watts- Impedance: 2 and 4 Ohm- Preamp: tube (2 x 12AX7)- Driver: tubes (1 x 12AX7, 2 x 12AU7)- Power Amp: Tube (6 x 6550)- Controls for gain, master, bass, treble, mids- Parametric mids: 5 positions (220, 450, 800, 1600, 3000 Hz)- Ultra Hi/Lo Boost- Balanced DI-Out- Power Amp input- Pre Amp output- Slave output- BIAS Setting- Wooden cabinet- Dimensions (W x H x D): 61 x 29 x 33 cm- Weight: 36.3 kg- Made in USA |
|
| Ampeg : SVT 50th Heritage Sp.Ed Bundle
Ampeg SVT 50th Heritage Sp.Ed. Tube Amp Head for Electric Bass-
50th Heritage Special Edi...(+) Ampeg SVT 50th Heritage Sp.Ed. Tube Amp Head for Electric Bass-
50th Heritage Special Edition-
Channel 1 corresponds to the 1969 version-
Channel 2 is based on the sound of the mid 70s SVT models-
Power: 300 watts-
Impedance: 2 and 4 Ohm-
Preamp: tube (2 x 12AX7)-
Driver: tubes (1 x 12AX7, 2 x 12AU7)-
Power Amp: Tube (6 x 6550)-
Controls for gain, master, bass, treble, mids-
Parametric mids: 5 positions (220, 450, 800, 1600, 3000 Hz)-
Ultra Hi/Lo Boost-
Balanced DI-Out-
Power Amp input-
Pre Amp output-
Slave output-
BIAS Setting-
Wooden cabinet-
Dimensions (W x H x D): 61 x 29 x 33 cm-
Weight: 36.3 kg-
Made in USA Ampeg Heritage SVT-810AV Cabinet for electric bass-
Suitable for the Heritage 50th Anniversary top by Ampeg-
Drivers: 8x 10 Custom U.S. made Eminence speakers-
Power handling: 800 W at 4 ohms (mono) or 2 x 400 W at 8 ohms (stereo)-
Max. sound pressure: 130 dB-
Frequency range: 40 - 5.000 Hz-
15 mm poplar plywood cabinet-
Connection: Jack and speaker twist-
Finish: Black with blue/silver front cover-
Dimensions: 122 x 66 x 41 cm-
Assembled in the USA pro snake 13091 Speaker Twist Cable 1.5m Speaker Cable-
Neutrik connectors: Speaker Twist - Speaker Twist-
Diameter: 2 x 2.5 mm²-
Length: 1.5 m-
Made in Germany |
|
| Ampeg : SVT-210AV (109 comments)
Equipped with: 2 x 10" Eminence speakers- Power rating: 200 Watt RMS at 8 Ohm (mono)- Port...(+) Equipped with: 2 x 10" Eminence speakers- Power rating: 200 Watt RMS at 8 Ohm (mono)- Portable alternative to the full-size SVT cabinet- Frequency range (-3 dB): 58 - 5,000 Hz- Usable low frequency (-10 dB): 40 Hz- Dimensions (H x W x D): 610 x 330 x 280 mm- Weight: approx. 14 kg |
|
| Ampeg : SVT-810AV (6 comments)
Equipped with 8x 10" Eminence speaker- Power rating: 800 Watt RMS- Jack and speaker twist ...(+) Equipped with 8x 10" Eminence speaker- Power rating: 800 Watt RMS- Jack and speaker twist socket- Max. SPL: 130 dB- Impedance: 4 Ohm - switchable to 2 x 8 Ohm bi amp/ stereo- Frequency range: 40 Hz - 5 kHz- Low end woofer- Front grille: silver grey- Dimensions: 121.92 x 66.04 x 40.64 cm- Weight: 75 kg |
|
| Ampeg : PF-115HE Portaflex (43 comments)
Components: 1x 15 "ceramic Eminence LF speaker and 1" HF compression driver with L-pad vol...(+) Components: 1x 15 "ceramic Eminence LF speaker and 1" HF compression driver with L-pad volume control- Resilience: 400W RMS into 8 ohms- Frequency response (-3 dB): 50 Hz - 17 kHz- Lowest usable frequency (-10 dB): 35 Hz- Sensitivity: 99.5 dB SPL @ 1W / 1m- Max. SPL: 125.5 dB- Connections: 2x Jack- Dimensions (H x W x D): 584.20 x 533.40 x 355.60 mm- Weight: 20.40 kg- Vintage Portaflex flip top design- Black diamond tolex- Vintage B-15 Front reference |
|
| Ampeg : SVT-410HLF (81 comments)
Rated power: 500 W- Impedance: 4 O- Equipped with: 4x 10" speakers + horn- Transition freq...(+) Rated power: 500 W- Impedance: 4 O- Equipped with: 4x 10" speakers + horn- Transition frequency: 4 kHz- Sensitivity: 98 dB- Max. SPL: 125 dB- Frequency range: 48 - 18,000 Hz- Dimensions approx.: 76 x 60 x 48 cm- Weight: 38.6 kg |
|
| Ampeg : V-4B Bass Head Bundle (1 comments)
Ampeg V-4B Bass Head Electric Bass Head-
All-tube amplifier-
Power: 100 W-
Preamp tubes...(+) Ampeg V-4B Bass Head Electric Bass Head-
All-tube amplifier-
Power: 100 W-
Preamp tubes: 2 x 12AX7-
Driver tubes: 1 x 12AX7 and 1 x 12AU7-
Power amp tubes: 4 x 6L6GC-
Vintage rocker switches-
Chassis suspension system-
3-Band EQ: Bass, mids and treble-
3 Mid-range frequencies per rocker switch-
Ultra hi/lo boost-
Speaker connectors: 1 x 8 Ohm, 2 x 4 Ohm and 2 x 2 Ohm-
Balanced direct out with ground lift-
Power amp in / preamp out-
-15 dB input-
Slave output to terminals on additional amplifiers-
Dimensions (W x H x D): 610 x 279 x 279 mm-
Weight: 18.6 kg-
Classic V-4B - Ampeg Black Line design-
Matching case: Art.318733 (not included in delivery) Ampeg SVT-212AV Cabinet Loudspeaker for electric bass Load bearing capacity: 600 W RMS @ 4 Ohm-
Equipped with two 12" custom Eminence woofers and 1" compression driver with 3-way level control-
Solid 15 mm poplar and plywood bass reflex port-
Integrated side handles-
Frequency range (-3dB): 71 Hz - 18 kHz-
Lowest Frequency (-10dB): 35 Hz-
Sensitivity: 99 dB SPL @ 1W/1m-
Dimensions (WxHxD): 610 x 635 x 406 mm-
Weight: 30 kg Cordial CRI 6 PP High end instrument cable-
RoadLine CGK Road 75-
Jack / jack-
Metal plugs with gold contacts-
Length: 6 m-
Colour: Black the sssnake PPS1015 The sssnake PPS 1015-
1.5 m Speaker cable, 2 x 1.5 mm² cross section-
6.3 mm Jack - 6.3 mm Jack-
Suitable for passive speakers - not for active speakers |
|
| Ampeg : PF-50T Bass Head (23 comments)
All-tube amplifier- Power: 50 W @ 4 or 8 Ohm- 2 Preamp tubes 12AX7- 1 Power amp tube 12AU7...(+) All-tube amplifier- Power: 50 W @ 4 or 8 Ohm- 2 Preamp tubes 12AX7- 1 Power amp tube 12AU7- 2 Power amp tubes 6L6- 2 Inputs: 0 db and -15 db- Controls: Bass, mid and treble- 5-Step control for mids- Ultra hi/lo boosts- Input gain control- Pre/Post EQ- Ground Lift- Transformer balanced line out- Ideal for studio applications as load resistance (speaker) is not required- Adjustable bias controls- Dimensions: 382 x 190 x 260 mm- Weight: 8.8 kg |
|
| Ampeg : Cover SVT 410HLF (50 comments)SVT 410 HLF- Inside dimensions (WxHxD): 610 x 762 x 483 mm |
|
| Ampeg : V-4B Bass Head Bundle (1 comments)Ampeg V-4B Bass Head- Thon Ampeg SVT Series |
|
| Ampeg : PF-410HLF (42 comments)
Equipped with: 4x 10" ceramic Eminence LF loudspeakers and 1" HF compression driver with L...(+) Equipped with: 4x 10" ceramic Eminence LF loudspeakers and 1" HF compression driver with L-pad volume control- Rated power: 800W RMS at 8 Ohm- Frequency range (-3 dB): 55 Hz - 17 kHz- Lowest usable frequency (-10 dB): 30 Hz- Sensitivity: 101 dB SPL @ 1W / 1m- Max. SPL: 130dB- Connections: 2x Jack- Dimensions (HxWxD): 693 x 578 x 445 mm- Weight: 33.3 kg- Vintage Portaflex design- Black Diamond Tolex- Vintage B-15 grille cloth- Incl. castors |
|
| Ampeg : SVT-212AV Cabinet (16 comments)
Load bearing capacity: 600 W RMS @ 4 Ohm- Equipped with two 12" custom Eminence woofers an...(+) Load bearing capacity: 600 W RMS @ 4 Ohm- Equipped with two 12" custom Eminence woofers and 1" compression driver with 3-way level control- Solid 15 mm poplar and plywood bass reflex port- Integrated side handles- Frequency range (-3dB): 71 Hz - 18 kHz- Lowest Frequency (-10dB): 35 Hz- Sensitivity: 99 dB SPL @ 1W/1m- Dimensions (WxHxD): 610 x 635 x 406 mm- Weight: 30 kg |
|
| Ampeg : V-4B Bass Head Bundle
Ampeg V-4B Bass Head Electric Bass Head-
All-tube amplifier-
Power: 100 W-
Preamp tubes...(+) Ampeg V-4B Bass Head Electric Bass Head-
All-tube amplifier-
Power: 100 W-
Preamp tubes: 2 x 12AX7-
Driver tubes: 1 x 12AX7 and 1 x 12AU7-
Power amp tubes: 4 x 6L6GC-
Vintage rocker switches-
Chassis suspension system-
3-Band EQ: Bass, mids and treble-
3 Mid-range frequencies per rocker switch-
Ultra hi/lo boost-
Speaker connectors: 1 x 8 Ohm, 2 x 4 Ohm and 2 x 2 Ohm-
Balanced direct out with ground lift-
Power amp in / preamp out-
-15 dB input-
Slave output to terminals on additional amplifiers-
Dimensions (W x H x D): 610 x 279 x 279 mm-
Weight: 18.6 kg-
Classic V-4B - Ampeg Black Line design-
Matching case: Art.318733 (not included in delivery) Ampeg Cover V-4B Dust Cover-
For Ampeg V-4B Bass Amp Head |
|
| Ampeg : Heritage HSVT-410HLF (19 comments)
Made â â in USA- Equipped with: 4x 10" speakers + 1x 1" Horn Driver- Power rating: 500...(+) Made â â in USA- Equipped with: 4x 10" speakers + 1x 1" Horn Driver- Power rating: 500 Watts RMS @ 4 ohms- Frequency response: 28 Hz - 18 kHz- 125 dB max SPL, 98 dB sensitivity- Dimensions (W x H x D): 58 x 76 x 44.5 cm- Weight: 34.47 kg- Included: Dolly-style casters |
|
| Ampeg : SVT CL (26 comments)
Wooden housing- Power: 300 Watt- Impedance: 2 and 4 Ohm- Preamp tubes: 2 x 12AX7- Driver t...(+) Wooden housing- Power: 300 Watt- Impedance: 2 and 4 Ohm- Preamp tubes: 2 x 12AX7- Driver tubes: 1 x 12AX7 and 2 x 12AU7- Power amp tubes: 6 x 6550- Controls for Gain, Master, bass, treble and mids- Parametric mids: 5 Positions - 220, 450, 800, 1600, 3000 Hz- Ultra hi/lo boost- Balanced DI-out- Power amp in- Preamp out- Slave out- BIAS setting- Dimensions (W x H x D): 61 x 29 x 33 cm- Weight: 36.3 kg |
|
| Ampeg : Cover SVT 810E/810AV (31 comments)For SVT 810E- With recesses for handle, feet and footplate |
|