| Audix : ADX 10 FLP
(35 comments)
- Cardioid polar pattern- Frequency range: 50 - 18.000 Hz- With on/off- and low-cut switch...(+) - Cardioid polar pattern- Frequency range: 50 - 18.000 Hz- With on/off- and low-cut switch- With transport bag P1 and 8" / 2.43 m cable for a mini XLR 3-Pin TA3F and battery phantom-powered adapter belt pack APS-911 with XLR-male output- 1x Mignon/AA battery or 9 - 52 V phantom power- For use with standard XLR micro cables, or alternatively without APS-911: For example, with the Audix wireless system (required phantom power: 1x Mignon battery/AA or 9-52 V)- Incl. Clip for transverse flutes with structure-borne sound insulation and foam windshield |
|
| Audix : VX-5
(31 comments)
- Super-cardioid polar pattern- Frequency range: 40 - 16.500 Hz- Impedance: 150 Ohm- Sensi...(+) - Super-cardioid polar pattern- Frequency range: 40 - 16.500 Hz- Impedance: 150 Ohm- Sensitivity: 6.9 mV / Pa (ref 1 kHz)- Switchable Low Cut at 150 Hz- Switchable 10 dB pad- 48 -52V Phantom power needed!- For high SPL (140 dB max.)- Stable housing- Extremely low feedback |
|
| Audix : ADX 20 i-p
(44 comments)
- With short gooseneck holder, rubberized clamp and elastic micro-suspension for direct at...(+) - With short gooseneck holder, rubberized clamp and elastic micro-suspension for direct attachment e.g. to brass instruments- Also suitable for double-bass bridge, tripods up to 6 mm or similar.- Linear transmission of 40 to 20,000 Hz- Polar pattern: Cardioid- Peak SPL: 135 dB- Especially suitable for: Saxophone, trumpet or trombone, double-bass, ambience for recording and broadcast- Requires phantom power 9 - 52 V- Prepolarised- Microphone with 1.4 m cable on three-pin mini XLR connector- Short gooseneck- Voltage converter APS910 mini XLR to XLR male- Windscreen- Travelbag |
|
| Audix : VX-10
(5 comments)
- 48-52 V Phantom power needed- For high SPL (138 dB)- Frequency range: 40 Hz - 20 kHz- Po...(+) - 48-52 V Phantom power needed- For high SPL (138 dB)- Frequency range: 40 Hz - 20 kHz- Polar pattern: Cardioid- Stable housing- Low feedback- Is used by the greats such as Sting, etc!- Weight: 319 g |
|
| Audix : Micro-D
(27 comments)
- With gooseneck- For drums and brass- Hypercardioid- 40 - 20,000 Hz- 250 Ohm- 140 dB max ...(+) - With gooseneck- For drums and brass- Hypercardioid- 40 - 20,000 Hz- 250 Ohm- 140 dB max SPL- Mini XLR connector- Adaptor APS910 to XLR male included- Included: Audix D-Vice rim clamp, optional mount for various acoustic instruments- 48 Volt phantom power required- Weight: 370 g |
|
| Audix : ADX 51
(22 comments)
- For overhead recording- Professional electret condenser microphone- Polar pattern: cardi...(+) - For overhead recording- Professional electret condenser microphone- Polar pattern: cardioid- Frequency range: 40 Hz - 18 kHz- Impedance: 100 Ohm- Max. SPL: 132 dB (142 dB with pad)- Also suitable for flute, strings, etc. |
|
| Audix : M1250-B-c
- Polar pattern: Cardioid- Length: 54 mm- Diameter: 12 mm- Frequency: 50 Hz - 19 kHz- Max....(+) - Polar pattern: Cardioid- Length: 54 mm- Diameter: 12 mm- Frequency: 50 Hz - 19 kHz- Max. SPL 140 dB- For 18 - 52 V phantom power- Colour: Black- Includes 7.5 m connection cable Mini-XLR to XLR male CBL-M25, micro-clamp MC-Micro, adjustable suspension device MC-Hanger, windscreen WS-1218 and transport bag P-1 |
|
| Audix : PDX720
- For vocals and instrument recording- Polar pattern: hypercardioid- Frequency range: 50 -...(+) - For vocals and instrument recording- Polar pattern: hypercardioid- Frequency range: 50 - 20,000 Hz- Max. SPL 135 dB- Sensitivity: 1.9 mV- 280 Ohm- Connection: 3-pin XLR- Preamplifier circuit- Switch for high-pass filter at 120 Hz and 155 Hz- Switch for presence boost 1.5 dB and 3 dB- Length: 212 mm- Weight: 0.869 kg- Colour: Black/Gold |
|
| Audix Ad-tm1 Test And Measurment Microphone Tm1+ Tm1plus
Omni-directional test and measurement microphone for RTA and software systems. The TM1 is...(+) Omni-directional test and measurement microphone for RTA and software systems. The TM1 is a 6 mm pre-polarized condenser microphone used for test and measurement applications. The TM1 is known for its linearity, accurate response, consistency, ease of use and affordability. Equipped with a uniformly controlled omnidirectional polar pattern, the TM1 is designed to capture acoustic measurements for room analysis software programs, real time analyzers and other sound control devices. With a flat frequency range of 20 Hz - 25 kHz, the TM1 is an excellent tool for sound engineers, sound companies and recording enthusiasts. The TM1 is designed, machined, assembled and tested by Audix in the USA. Model Variation: TM1 PLUS - includes calibration data file and sensitivity, threaded acoustic windscreen, and CA4231 machined calibration adapter Specifications : - Type : Pre-polarized Condenser - Polar Pattern : Omni-directional - Frequency Response : 20Hz - 25kHz /-2 dB - Impedance : 200 Ohms - Sensitivity : 6 mV/Pa @1k |
|
| Audix Ad-tm1 Test And Measurment Microphone
Omni-directional test and measurement microphone for RTA and software systems. The TM1 is...(+) Omni-directional test and measurement microphone for RTA and software systems. The TM1 is a 6 mm pre-polarized condenser microphone used for test and measurement applications. The TM1 is known for its linearity, accurate response, consistency, ease of use and affordability. Equipped with a uniformly controlled omnidirectional polar pattern, the TM1 is designed to capture acoustic measurements for room analysis software programs, real time analyzers and other sound control devices. With a flat frequency range of 20 Hz - 25 kHz, the TM1 is an excellent tool for sound engineers, sound companies and recording enthusiasts. The TM1 is designed, machined, assembled and tested by Audix in the USA. Model Variation: TM1 PLUS - includes calibration data file and sensitivity, threaded acoustic windscreen, and CA4231 machined calibration adapter Specifications : - Type : Pre-polarized Condenser - Polar Pattern : Omni-directional - Frequency Response : 20Hz - 25kHz /-2 dB - Impedance : 200 Ohms - Sensitivity : 6 mV/Pa @1k |
|
| Audix Ad-adx51 Static Condenser Microphone Cardioid For Overhead Instruments Ambiance
Pre-polarized condenser microphone for overheads, cymbals, high-hat and acoustic instrumen...(+) Pre-polarized condenser microphone for overheads, cymbals, high-hat and acoustic instruments. The ADX51 is a professional, pre-polarized condenser microphone for stage, studio and broadcast applications. The ADX51 is clear sounding, accurate in response and handles both close and distance miking for various acoustic instruments. Designed with a uniformly controlled cardioid polar pattern, the ADX51 captures the acoustics of the instrument being miked while isolating it from other instruments. The ADX51 features a 14 mm gold vapor diaphragm and a -10 dB pad and bass roll-off filter. The ADX51 includes a tension-fit heavy duty nylon mic clip (DCLIP) , external foam windscreen (W-81), and zippered carrying pouch (P1). Specifications : - Type : Pre-polarized Condenser - Polar Pattern : Cardioid - Frequency Response : 40Hz - 18kHz - Impedance : 100 Ohms - Sensitivity : 18 mV/Pa @ 1kHz |
|
| Audix Ad-m1250bo Mini Condenser Microphone Omnidirectionnal Acoustic Instruments Clip Cable Screen W...
Miniaturized condenser microphone with RFI immunity. The M1250B condenser microphone ha...(+) Miniaturized condenser microphone with RFI immunity. The M1250B condenser microphone has a fully integrated preamp and detachable cable providing immunity from RF interference caused by cell phones and GSM devices. The M1250B is equipped with a cardioid capsule and is available with hypercardioid, omni or shotgun capsules allowing flexibility for use in live, studio and broadcast applications. The M1250B is designed to mic acoustic instruments, overhead stages, podiums, conferences and presentations. In addition to the stock cardioid model in black, the M1250B is also available with different polar patterns and colors. M1250BO -With omnidirectional capsule (black) Specifications - Type : Condenser - Polar Pattern : Omni-Directional - Frequency Response : 50Hz - 19kHz - Impedance : 150 Ohms - Sensitivity : @1k 10 mV/Pa (C) / 10 mV/Pa (HC) / 11 mV/Pa (O) |
|
| Audix Ad-vx5 Electret Microphone For Voice Condenser Supercardioid
High performance electret condenser for vocals and acoustic instruments The VX5 is a mu...(+) High performance electret condenser for vocals and acoustic instruments The VX5 is a multi purpose, professional vocal condenser microphone designed for live, studio and broadcast applications. With an ability to duplicate studio quality sound on stage, the VX5 has a smooth and accurate frequency response, resistance to feedback and handles very high SPLs without distortion. Designed with a tight and uniformly controlled supercardioid polar pattern, the VX5 helps isolate vocals from the rest of the stage. Other features are a 14 mm gold vapor diaphragm, an acoustically ported steel mesh grill with a multi-stage pop filter, and a -10 dB pad and bass roll-off filter. The VX5 will handle SPLs in excess of 140 dB (with pad and roll-off engaged) and will provide over 20 dB of ambient noise rejection on live stages. In addition to vocal applications, the VX5 is designed to capture instruments such as guitars, woodwinds, brasses, percussion toys, drum overheads, hi-hats and pianos. The VX5 requires 18 - 52 V phantom power. Specifications - Type : Pre-polarized Condenser - Polar Pattern : Supercardioid - Frequency Response : 40Hz - 16.5kHz ( /-3dB) - Impedance : 150 ohms - Sensitivity : @1k 5 mV/Pa |
|
| Audix Adx20i-p Static Microphone
Miniature instrument microphone for sax and brass.The ADX20iP is applicable for profession...(+) Miniature instrument microphone for sax and brass.The ADX20iP is applicable for professional stage and studio applications. This mic is primarily used for miking most reed and brass instruments.The ADX20iP has a uniformly controlled cardioid polar pattern, which provides excellent isolation and feedback control on stage with natural sound reproduction at very close distances.The ADX20iP is lightweight, compact and simple to use. Included with the ADX20iP is a gooseneck clip with spring tension for easy mounting to the bell of an instrument.Model Variation: ADX20i - for use with RAD360 wireless system. No power adapter is included with this model. The ADX20i requires phantom power of 9-52 V.Specifications :- Type : Pre-polarized Condenser- Polar Pattern : Cardioid, Hypercardioid- Frequency Response : 40Hz - 20kHz- Impedance : 250 Ohms- Sensitivity : 6 mV/Pa @1k (C) / 5.6 mV/Pa @1k (HC) |
|
| Audix Ad-m1250b Mini Condenser Microphone Supercardioid Acoustic Instruments Clip Cable Screen Walle...
Miniaturized condenser microphone with RFI immunity. The M1250B condenser microphone ha...(+) Miniaturized condenser microphone with RFI immunity. The M1250B condenser microphone has a fully integrated preamp and detachable cable providing immunity from RF interference caused by cell phones and GSM devices. The M1250B is equipped with a cardioid capsule and is available with hypercardioid, omni or shotgun capsules allowing flexibility for use in live, studio and broadcast applications. The M1250B is designed to mic acoustic instruments, overhead stages, podiums, conferences and presentations Specifications - Type : Condenser - Polar Pattern : Cardioid, Hypercardioid, Omni-Directional, Supercardioid - Frequency Response : 50Hz - 19kHz - Impedance : 150 Ohms - Sensitivity : @1k 10 mV/Pa (C) / 10 mV/Pa (HC) / 11 mV/Pa (O) |
|
MICROPHONE
