| BluGuitar : Amp1 Mercury Edition (77 comments)
Versatile, fully analogue amplifier in pedal format- 4 Channels- Power: 100 Watts- Adjusta...(+) Versatile, fully analogue amplifier in pedal format- 4 Channels- Power: 100 Watts- Adjustable boost- 3 Integrated footswitches- Speaker simulation for recording applications- Novel nanotube tube amplifier- PowerSoak power reducer- Controls: Clean Volume, Overdrive Gain, Overdrive Master, Bass, Middle, Treble, Reverb, Master- Switches: Clean / Overdrive, Boost, Reverb- Effects: Reverb- Speaker outputs: 16 Ohms & 8 ohms (6.3 mm jack)- Effect grinding paths: Serial / Parallel- Input: 6.3 mm Jack- FX Loop Send & Return: 2x 6.3 mm Jack- Rec Out / Headphones: 6.3 mm Stereo jack- Dimensions (W x D x H): 245 x 192 x 68 mm- Weight: 1.2 kg- Matching footswitch: Article Nr. 350865 (not included) |
|
| BluGuitar : Amp1 Iridium Edition (24 comments)
Fully analogue metal amplifier in pedal format- Newly developed 100 W nanotube power amp- ...(+) Fully analogue metal amplifier in pedal format- Newly developed 100 W nanotube power amp- 3 Independent high-gain channels with different attack, response and dynamics can be adjusted in gain structure and timbre: Full, Tight & Chug- Clean channel specially tuned for humbuckers- Infinitely variable gain boost, connected to all channels like a pedal- Speaker simulation can be switched off for recording applications- Noise gate with three different sensitivity levels- PowerSoak power reducer- 4 Channels- Power: 100 W- 3 Footswitches- Controls: Clean Volume, Overdrive Gain, Overdrive Master, Bass, Middle, Treble, Reverb, Master, Boost, Modern Volume & Tone, Classic Volume / Tone, Clean Tone- Switches: Clean/Overdrive, Boost, Reverb, Parallel/Serial, Noisegate- Effects: Reverb- Speaker outputs: 16 and 8 Ohm (6.3 mm jack)- Effect loop-in paths: serial/parallel, +4/-10 dB switchable, programmable- Input: 6.3 mm jack- FX send / return: 2x 6.3 mm jack- Rec/Headphone output: 6.3 mm stereo jack- Dimensions (W x D x H): 245 x 192 x 68 mm- Weight: 1.2 kg |
|
| Blackstar : Dept. 10 Amped 3 (9 comments)
100 W guitar amp with multi-effects in floor format- Preamp: 3 channels with 2 voices each...(+) 100 W guitar amp with multi-effects in floor format- Preamp: 3 channels with 2 voices each- Switchable power amp responses : 6L6, EL34, EL84- 3-Band EQ: bass, mid, treble- Power reduction 100 W / 20 W / 1 W- Reverb with 2 modes- Footswitchable boost, switchable between pre- and post-preamp- Effect path: serial / parallel switchable in Architect software- MIDI input and MIDI Thru- Cab rig, USB and XLR out- 2x 9 V DC out- Aluminium housing with illuminated logo- Dimensions (W x H x D): 285 x 80 x 142 mm- Weight: 2.56 kg |
|
| BluGuitar : Fatcab (20 comments)
Ideal complement to the BluGuitar AMP1 on small and medium-sized stages- Equipped with: 1x...(+) Ideal complement to the BluGuitar AMP1 on small and medium-sized stages- Equipped with: 1x 12" Special Bluguitar Fat Speaker- Closed back- Rated power: 60W- Impedance: 8 - Body: Birken-Multiplex, extremely stiff- 1 Mono input- 1 Parallel output- 1 Serial output- Fat bass with quick response, a creamy midrange, plus soft and silky heights- With the Thiele & Small Bass reflex system, this cabinet sounds like an old 4x12" cabinet- Dimensions (W x D x H): 550 x 295 x 410 mm- Weight: 12 kg- Includes protective cover |
|
| Blackstar : Dept. 10 Amped 1 (7 comments)
100 W guitar amplifier in floor format- Preamplifier Voices: USA, UK, Flat- Power amp Resp...(+) 100 W guitar amplifier in floor format- Preamplifier Voices: USA, UK, Flat- Power amp Responses: KT88, 6L6, EL34, 6V6, EL84, Linear- EQ: Bass, Middle and Treble- Power reduction 100 W, 20 W, 1 W- Reverb with freeze effect- Built-in Cab Rig DSP- USB audio- XLR cab rig output- Headphone output- Effects loop (serial/ parallel switchable in Architect software)- Footswitchable preset mode- Illuminated Blackstar logo- MIDI input- Speaker outputs: 8 Ohm, 16 Ohm- 2 x 9 V outputs for effect pedals (max.)- Combined output: 500 mA)- Power supply: 100 to 264 V, 50/60 Hz- Weight: 1.53 kg- Dimensions (W x H x D): 200 x 81 x 149 mm |
|
| Blackstar : Dept. 10 Amped 2 (8 comments)
Preamp Voices: USA, UK and Classic Preamp- Response control: 6L6 (Tight dynamic Class A/B ...(+) Preamp Voices: USA, UK and Classic Preamp- Response control: 6L6 (Tight dynamic Class A/B with extended highs and lows), EL34 (Classic British Class A/B crunch full-bodied soft break-up) or EL84 (Bell-like full-bodied Class A with heavy compression)- Adjustable presence- 3-Band EQ, bass, middle, treble- Power reduction 100 W, 20 W, 1 W- Drive: Boost, Drive, Fuzz, dedicated footswitch and knob- Modulation pedal: CH/FL (chorus/flanger), tremolo, phaser- Dedicated MOD footswitch and controls- Footswitch to hold the "Emphasis" effect- Delay: linear,analogue or shimmer- Dedicated delay footswitch and controls- Reverb: Room, Spring and Plate- Dedicated MOD footswitch and controls- Footswitch to hold the "Freeze" effect- Tap footswitch for tempo/BPM input- Hold: Shift function for accessing secondary functions of front panel controls- OLED display for instant feedback on parameter changes- Chromatic tuner- CabRig with 3 user-programmable presets- CabRig outputs: 0.25" jack, USB and balanced XLR- Effects loop (serial or parallel, pre or post via Architect)- Out: Post-preamp/effect and pre-power amp line-level outputs for versatile connectivity- MIDI input: Amp and effect parameters adjustable via MIDI- MIDI Thru- 2 x 9 V DC pedal power outputs- Full power via 8 or 16-ohm speaker outputs- Universal voltage mains input- Blackstar's Architect software for in-depth editing of effect settings and CabRig- Aluminium cabinet- Illuminated logo- Dimensions (W x H x D) 288 x 80 x 149 mm- Weight 1.98 kg |
|
| BluGuitar : Nanocab (45 comments)
Ultra compact, can be easily transported by plane, train or motorbike- Equipped with: 1x12...(+) Ultra compact, can be easily transported by plane, train or motorbike- Equipped with: 1x12" Special BluGuitar Classic- Closed back- Power rating: 60 W- Impedance: 8 Ohm- Body: Birch plywood, dovetail joint, extremely sturdy- 1 Mono input- 1 Parallel output- 1 Serial output- Produces a huge sound with fantastic low basses thanks to its bass reflex construction- A loyal band companion- Balanced and rich sound even at low volume- Dimensions: (W x D x H) 350 x 275 x 350 cm- Weight: 10 kg |
|
| Blackstar : Foot Controller FS-17 (2 comments)
Original footswitch for Blackstar Sonnet series- Switches mute and reverb on and off- Robu...(+) Original footswitch for Blackstar Sonnet series- Switches mute and reverb on and off- Robust metal housing |
|
| Blackstar : Live Logic (17 comments)
6-Way switch- MIDI over USB for controlling DAW, plugins and live sequencer / sampling sof...(+) 6-Way switch- MIDI over USB for controlling DAW, plugins and live sequencer / sampling software- Can also be used as a USB MIDI interface- 2 Expression pedal inputs- Individual MIDI control via free Mac / PC software- MIDI IN - MIDI THRU- Power supply via battery, 9V DC power supply or via USB connection- Bright LED display- Robust and stable metal housing- Weight: 1 kg- Suitable power supply: Blackstar PSU-500 (not included) |
|
| Blackstar : HT-20R MkII Valve Combo (31 comments)
Full tube- Power: 20 Watt- 2x EL84 power stage tubes- 1x 12" Custom Loudspeaker- Front inc...(+) Full tube- Power: 20 Watt- 2x EL84 power stage tubes- 1x 12" Custom Loudspeaker- Front inclined 3° for better audibility- 2 Channels with 2 voicings each- Clean: "American" and "British"- OD: "Classic" and "High Gain"- ISF Tone Control- Studio-quality reverb- Switchable power reduction to 2 W- XLR and Jack Emulated Outputs- USB Audio Out- MP3 In- Effect loop- Dimensions (W x H x D): 503 x 455 x 271 mm- Weight: 16.2 kg- Includes 2-fold foot switch for channel switching |
|
| Blackstar : HT-5R MkII (78 comments)
2 Channels- Power: 5 watt- ECC83 preamp tube- 12BH7 power amp tube- Loudspeaker configurat...(+) 2 Channels- Power: 5 watt- ECC83 preamp tube- 12BH7 power amp tube- Loudspeaker configuration: 1x 12".- Push-pull power amp design- Switchable voices for clean and overdrive- Power reduction to 0.5 Watt- USB Audio Out- XLR D.I. Out- Studio-quality reverb- Dimensions (H x W x D): 405 x 443 x 252 mm- Weight: 12.4 kg- Includes 2-way footswitch |
|
| Blackstar : FLY 3 Extension Cabinet (146 comments)
Blackstar FLY 3 a 6 watt stereo setup- Power: 3 Watt- Equipped with: 3 "speaker- Also suit...(+) Blackstar FLY 3 a 6 watt stereo setup- Power: 3 Watt- Equipped with: 3 "speaker- Also suitable as PC speakers- Dimensions (WxHxD): 17.5 x 13.6 x 10.7 cm- Weight: 1 kg |
|
| Blackstar : FLY 3 Mini Amp BK (567 comments)
Power: 3 W- Equipped with: 3" Speaker- 2 Channels- Built-in Delay- AUX-Input- Patented ISF...(+) Power: 3 W- Equipped with: 3" Speaker- 2 Channels- Built-in Delay- AUX-Input- Patented ISF tone control- Headphone and recording output with speaker simulation- Power supply via battery or power adapter (not included, optionally available: Article Nr 353113)- Dimensions (W x H x D): 17.5 x 13.6 x 10.7 cm- Weight: 1 kg |
|
| Blackstar : HT-1R MkII Combo (36 comments)
2 Channels- Power: 1 W- Equipped with: 8" Speaker- ECC83 preamp tube & ECC82 power tube- P...(+) 2 Channels- Power: 1 W- Equipped with: 8" Speaker- ECC83 preamp tube & ECC82 power tube- Push-Pull power amp design- Switchable Voices for Clean and Overdrive- Reverb in studio quality- USB Audio Out- 4-16 Ohm Extension Speaker Out |
|
| Blackstar : HTV-412A MkIII
|
|
| Blackstar : St. James 50 6L6 Black Combo (3 comments)
2 Channels- Power: 50 W- Preamp tubes: 2x ECC83- Power amp tubes: 2x 6L6- Speaker configur...(+) 2 Channels- Power: 50 W- Preamp tubes: 2x ECC83- Power amp tubes: 2x 6L6- Speaker configuration: 1x 12" Clestion Zephyr- Voice switch- Controls for bass, middle, treble, reverb- Power reduction switch: 50 W / Sag / 2 W- Built-in Reactive Load and Cab Rig DSP- USB audio- XLR cab rig output- Serial effects loop with level switch- Black Tolex and Silver Birch covering- 90 V to 264 V 50/60 Hz- Weight: 12.8 kg- Dimensions: 535 x 462 x 259 mm- Includes 2-way foot switch |
|