| Gotoh : GE1996T-C FR-Style Tremolo (13 comments)
Double Lock series- Specially hardened steel saddles- String spacing: 10.8 mm- Dimensions:...(+) Double Lock series- Specially hardened steel saddles- String spacing: 10.8 mm- Dimensions: 91.5 x 56 x 11.8 mm- Brass sustain block- Dimensions: 40 x 50 mm- Colour: Chrome- Made in Japan |
|
| Gotoh : GB-640 Bass Machine Set (69 comments)
Extremely lightweight Res-O-Lite machine heads made of duralumin- Specially designed to el...(+) Extremely lightweight Res-O-Lite machine heads made of duralumin- Specially designed to eliminate top heaviness- Configuration: 4 Left-handed- Construction: Open- Gear ratio: 1:28- Shaft length (to string hole) 20.4 mm- Bore: 17.6 mm- Mounting with screws and press-in bushings- Surface: Nickel- Includes mounting screws and press-in bushings- Made in Japan |
|
| Gotoh : 510TS-FE1 ST-Style Trem C (20 comments)
Attachment: 2 Point- Distance between boreholes (maximum): 56 mm- Individual string spacin...(+) Attachment: 2 Point- Distance between boreholes (maximum): 56 mm- Individual string spacing: 10.8 mm- Total string spacing: 54 mm- Steel block- Dimensions (H x W): 42 x 64 mm- Finish: Chrome- Includes tremolo arm, spring, spring holder, key, bolts and screws- Made in Japan |
|
| Gotoh : In-Tune BS T-Style Saddles Set (56 comments)
3 Brass saddles- String spacing: 10.8 mm- Total width: 21.5 mm- Colour: Gold- Package quan...(+) 3 Brass saddles- String spacing: 10.8 mm- Total width: 21.5 mm- Colour: Gold- Package quantity: 3 Pieces |
|
| Gotoh : GB707 Chrome (57 comments)
Configuration: 2 Left / 2 right- Construction: Closed- Gear ratio: 1:20- Shaft length (to ...(+) Configuration: 2 Left / 2 right- Construction: Closed- Gear ratio: 1:20- Shaft length (to string hole): 24 mm- Bore: 14 mm- Attachment with screws and hex-head banjo bolts- Screw tab angle: 90°- Surface: Chrome- Includes fastening screws, nuts and hex-head banjo bolts- Made in Japan |
|
| Gotoh : SPBJ-4 Banjo Tuner Set N
SPBJ-4-PW-N- Quantity: 4 pieces- Planetary gear- For precise tuning- Enclosed construction...(+) SPBJ-4-PW-N- Quantity: 4 pieces- Planetary gear- For precise tuning- Enclosed construction- Gear ratio: 1:4- Shaft length (to string hole): 22.5 mm- Bore diameter: 9.5 mm- Mounting via pins and hexagonal banjo bolts- Buttons: Plastic White- Finish: Nickel- Incl. washers and hexagon banjo bolts- Made in Japan |
|
| Gotoh : SG381-07 MG-T Locking 6R BC (17 comments)
Configuration: 6 Right- Gotoh MG-T traditional locking system with a knurled screw on the ...(+) Configuration: 6 Right- Gotoh MG-T traditional locking system with a knurled screw on the back of the machine head- Closed construction- Small metal buttons- Gear ratio: 1:16- Shaft length: 18.5 mm- Second shaft length (staggered): 20 mm- Bore: 10 mm- Attachment: Screws and hex-head banjo bolts- Screw tab angle: 45°- SG381-07-B-R6 MG-T- Surface: Black, chrome- Includes fastening screws and hex-head banjo bolts- Made in Japan |
|
| Gotoh : GE1996T-B FR-Style Tremolo (13 comments)
Double Lock series- Specially hardened steel saddles- String spacing: 10.8 mm- Dimensions:...(+) Double Lock series- Specially hardened steel saddles- String spacing: 10.8 mm- Dimensions: 91.5 x 56 x 11.8 mm- Brass sustain block- Dimensions: 40 x 50 mm- Colour: Black Chrome- Made in Japan |
|
| Gotoh : GB350 2L/2R BC Bass Tuners (10 comments)
Res-O-Lite series- Super-light bass machine heads made of duralumin- Developed to prevent ...(+) Res-O-Lite series- Super-light bass machine heads made of duralumin- Developed to prevent top-heaviness- Configuration: 2 Left / 2 right- Closed construction- Gear ratio: 1:20- Shaft length (to string hole): 24.4 mm- Bore: 14 mm- Attachment: Screws and hex-head banjo bolt- Surface: Black- Includes fastening screws, nuts and hex-head banjo bolts- Made in Japan |
|
| Gotoh : GE101ZS (60 comments)
Tailpiece for Electric Guitar- Suitable for models with TOM-Style bars- Material: Cast zin...(+) Tailpiece for Electric Guitar- Suitable for models with TOM-Style bars- Material: Cast zinc- Single string spacing: 10.3 mm- Total string spacing: 51.5 mm- Dimensions (W x D x H): 102 x 18 x 13 mm- Bolt spacing: 82 mm- Finish: Black chrome-plated- Includes M8 (metric) height adjustment bolts and impact sleeves- Made in Japan |
|
| Gotoh : 404SJ-C Bass Bridge (11 comments)
String spacing: 19 mm- Steel saddles- 7-Hole screw attachment- Dimensions: 85 x 58 x 11 mm...(+) String spacing: 19 mm- Steel saddles- 7-Hole screw attachment- Dimensions: 85 x 58 x 11 mm- Colour: Chrome- Made in Japan |
|
| Gotoh : SPBJ-4 Banjo Tuner Set C (1 comments)
SPBJ-4-PW-C- Quantity: 4 pieces- Planetary gear- For precise tuning- Enclosed construction...(+) SPBJ-4-PW-C- Quantity: 4 pieces- Planetary gear- For precise tuning- Enclosed construction- Gear ratio: 1:4- Shaft length (to string hole): 22.5 mm- Bore diameter: 9.5 mm- Mounting via pins and hexagonal banjo bolts- Buttons: Plastic White- Finish: Chrome- Incl. washers and hexagon banjo bolts- Made in Japan |
|
| Gotoh : SG381-07 MG-T Locking 3L/3R C (16 comments)
Gotoh MG-T Traditional Locking with knurled screw on the back of the machine head- Configu...(+) Gotoh MG-T Traditional Locking with knurled screw on the back of the machine head- Configuration: 3 Left / 3 right- Closed construction- Buttons: Small metal- Gear ratio: 1:16- Shaft length (to string hole): 20 mm- Bore: 10 mm- Attachment: Screws and hexagon banjo bolt- Screw tab angle: 45°- Surface finish: Chrome- Includes fastening screws and hexagon banjo bolts- Made in Japan |
|
| Gotoh : GB528 4L N Bass Tuners (9 comments)
Res-O-Lite series- Super-light bass machine heads made of duralumin- Developed to prevent ...(+) Res-O-Lite series- Super-light bass machine heads made of duralumin- Developed to prevent top-heaviness- Configuration: 4 Left- Open construction- Gear ratio: 1:26- Shaft length (to string hole): 24.4 mm- Bore: 16 mm- Attachment: Screws and hex-head banjo bolt- Surface: Nickel- Includes fastening screws, nuts and hex-head banjo bolts- Made in Japan |
|
| Gotoh : GE103B-T B (95 comments)
Tune-O-Matic Style- For guitars with a fretboard radius of 300 mm (12")- Fits many guitars...(+) Tune-O-Matic Style- For guitars with a fretboard radius of 300 mm (12")- Fits many guitars made in the Far East with large metric screws (M8 thread)- Screw spacing: 74 mm- Dimensions (W x D x H): 84.5 x 14 x 12.6 mm- Finish: Black, chrome- Includes M8 x 33.5 mm bolts & press-in bushings- Made in Japan |
|
| Gotoh : 35G1800-2M Classic Tuners (4 comments)
Configuration: 3 Left / 3 Right- Construction: Open- Buttons: Cream-coloured plastic- Gear...(+) Configuration: 3 Left / 3 Right- Construction: Open- Buttons: Cream-coloured plastic- Gear ratio: 1:14- Shaft length (to string hole): 16.5 mm- Bore: 10 mm- Attachment: Screws- Surface: Gold- Gotoh No. 35G1800-2M- Fixing screws included- Made in Japan |
|
| Gotoh : GB350-5 3L/2R BC Bass Tuners (3 comments)
GB350-5-B L3+R2- Res-O-Lite series- Super light bass machine heads made of duralumin- Deve...(+) GB350-5-B L3+R2- Res-O-Lite series- Super light bass machine heads made of duralumin- Developed to eliminate top-heaviness- 5 Pieces- Configuration: 3 left/2 right- Construction: Enclosed- Gear ratio: 1:20- Shaft length (to string hole): 24.4 mm- Bore: 14 mm- Mounting: Screw(s) and hexagon banjo bolt(s)- Including: Mounting screw(s), nut(s) and hexagonal banjo bolt(s)- Finish: Black- Made in Japan |
|
| Gotoh : Wrench Holder WRH-1W (14 comments)
Gotoh Wrench Holder WRH-1W, black wrench holder with 4 guitar Allen Hex Keys, Wrench size:...(+) Gotoh Wrench Holder WRH-1W, black wrench holder with 4 guitar Allen Hex Keys, Wrench size: 1,5mm / 2mm / 2,5mm / 3mm, made in Japan |
|
| Gotoh : SG381-07 MG-T Locking 6L CB (27 comments)
Gotoh MG-T Traditional Locking System with a thumbscrew on the back of the machine head- C...(+) Gotoh MG-T Traditional Locking System with a thumbscrew on the back of the machine head- Configuration: 6 Left- Closed construction- Wing: Small Metal Button- Gear ratio: 1:16- Shaft length: 18.50 mm- Second shaft length (staggered): 20 mm- Bore: 10 mm- Mounting: Screws and hexagonal banjo bolt- Screw plate angle: 45°- Surface finish: Cosmo Black- Includes mounting screws and hexagonal banjo bolts- Made in Japan |
|
| Gotoh : SG301-20 MG-T Locking 3L/3R C (28 comments)
SG301-20-C L3+R3 MG-T- Gotoh MG-T traditional locking system with a knurled screw on the b...(+) SG301-20-C L3+R3 MG-T- Gotoh MG-T traditional locking system with a knurled screw on the back of the machine head- 6 Pieces- Configuration: 3 Left / 3 Right- Closed construction- Buttons: Kidney Metal- Gear ratio: 1:18- Shaft length (to string hole): 22.2 mm- Bore: 10 mm- Attachment: Screw(s) and hex-head banjo screw- Screw tab angle: 90°- Surface finish: Chrome- Includes attachment screws, nuts and hex-head banjo bolts- Made in Japan |
|