| IO Instruments : Euporie
IO Instruments Euporie; Eurorack module; analog 4-pole Lowpass Filter; switchable between ...(+) IO Instruments Euporie; Eurorack module; analog 4-pole Lowpass Filter; switchable between two differently sounding resonance-types: Moog characteristic (with make-up gain) and Sallen & Key; audio input with gain-control for adjustable overdrive and saturation; switchable Highpass filter (150Hz) on the audio input; audio outputs for 24dB, 12dB and 6dB filter slope; CV input for resonance control; 1V/Oct. keytracking input with attenuator; linear FM input with attenuator; 2 exponential FM inputs (unipolar and bi-polar) with attenuator and CV-Thru output; power consumption: 70mA (+12V) / 70mA (-12V); width: 12 HP; depth: 22mm |
|
| IO Instruments : Pasiphae
IO Instruments Pasiphae; Eurorack module; experimental Ring Modulator; X- and Y-Audio Inpu...(+) IO Instruments Pasiphae; Eurorack module; experimental Ring Modulator; X- and Y-Audio Inputs, each with attenuator; DC coupled CV inputs for X- and Y-Level with attenuator; DC offset control for X- and Y-Channel; Mute switch per channel with CV control; positive and inverted signal output; Peak LED; low distortion circuit design with high headroom; low X and Y feedthrough; power consumption: 60mA (+12V) / 60mA (-12V); width: 12 HP; depth: 25mm |
|
| IO Instruments : Carpo
IO Instruments Carpo; Eurorack module; 3 channel headphones amplifier; for each channel: m...(+) IO Instruments Carpo; Eurorack module; 3 channel headphones amplifier; for each channel: mono/stereo inputs (left input normalized to right input), thru-outputs for both inputs, stereo headphones output (3.5mm jack) and volume control; suitable for headphones with 16-500 Ohms impedance; low distortion circuit design; relais protected soft-start and DC protection for connected headphones; power consumption (depending on volume settings and headphones impedance): 10-300mA (+12V) / 10-300mA (-12V); width: 12 HP; depth: 25mm |
|
| IO Instruments : Themisto
IO Instruments Themisto; Eurorack module; analog VCO; outputs for sine, tiangle, ramp, saw...(+) IO Instruments Themisto; Eurorack module; analog VCO; outputs for sine, tiangle, ramp, sawtooth, square (with adjustable pulsewidth); square-suboscillator with switchable phase inversion; frequency range: 10Hz - 130kHz; switchable LFO mode (0,5Hz - 6kHz); CV inputs for linear and exponential FM, each with attenuators; CV input for pulsewidth-modulation; VCO sync input; buffered Thru-outputs for V/Oct and Sync-Gate; power consumption: 60mA (+12V) / 60mA (-12V); width: 12 HP |
|
| IO Instruments : Himalia
IO Instruments Himalia; Eurorack module; Noise and Random Generator; analog noise output w...(+) IO Instruments Himalia; Eurorack module; Noise and Random Generator; analog noise output with filter (red, white and blue noise); CV input for noise filter; switchable comparator circuit to analog noise section; digital noise output with adjustable clock rate; CV input for clock rate; square wave output (derived from digital noise); Sample output with tuning control (selectrion of 32 Transient Samples); CV inputs for Sample tuning and Sample variation; 6-voice square mix output with tuning control and 16 presets for chords, drones and unison sounds; CV inputs for square tuning and preset-selection; power consumption: 120mA (+12V) / 105mA (-12V); width: 16 HP; depth: 25mm |
|
| IO Instruments : Sinope
IO Instruments Sinope; Eurorack module; dual cahnnel VCA; for each channel: CV input with ...(+) IO Instruments Sinope; Eurorack module; dual cahnnel VCA; for each channel: CV input with attenuator and clipping LED; exponential CV input with attenuator and clipping LED; offset control; signal input with gain control (+6dB max.); signal ouput with clipping LED; inverted signal output; suitable for CV and audio signals; frequency range: DC - 100kHz; power consumption: 120mA (+12V) / 105mA (-12V); width: 16 HP; depth: 22mm |
|
| IO Instruments : Sponde
IO Instruments Sponde; Eurorack module; high-quality audio- and CV-mixer; Mixer A and Mixe...(+) IO Instruments Sponde; Eurorack module; high-quality audio- and CV-mixer; Mixer A and Mixer B each with 6 inputs, Main output and direct outputs for channels 1-4 (for use as attenuators); maximum gain per channel: +6dB; A inputs are normalized to B inputs; suitable for mono, stereo, 6-channel and 12-channel applications; overload indicator for outputs A and B; power consumption: 90mA (+12V) / 82mA (-12V); Breite: 20 HP |
|