| Lehle : P-Split III (83 comments)
Lehle P-Split III; Splitter, DI box and problem solver; high-impedance Lehle Transformer H...(+) Lehle P-Split III; Splitter, DI box and problem solver; high-impedance Lehle Transformer HZ with phase and ground switch; can be used unbalanced or balanced; passive - does not require a power supply, Applications: Split an input signal to the two outputs with galvanic isolation (no ground loop); elimination of unwanted humming noise; passive Mono Summer for stereo signals; Connections: Input (1/4" TRS-Jack), DIR Output (1/4" TRS-Jack), ISO Output (1/4" TRS-Jack); Dimensions (W x D x H): 92 x 90 x 37 mm (3,62" x 3,54" x 1,46"); Weight: 375 g (0,83 lbs) |
|
| Lehle : Little Dual II (27 comments)
ABY-Switcher (A or B or both)- Hum- and loss-free switching- High-impedance Lehle Transfor...(+) ABY-Switcher (A or B or both)- Hum- and loss-free switching- High-impedance Lehle Transformer HZ- With phase and ground switch- Two different operating modes- Stereo routing options- Active switching click suppression- Push-buttons: TRS Switch, Phase, Ground- LED: A, B- Foot-switch: A, B- A/B input: 6.3 mm Stereo jack- A Input: 6.3 mm Jack- A Output: 6.3 mm Jack- B Output: 6.3 mm Jack- Mains adapter connection: Hollow plug socket 5.5 x- 2.1 mm, minus pole inside- Current consumption: 63 mA- Power supply via 9-15 V DC power supply unit (not included in delivery, suitable power supply unit: Article Nr. 409939)- Dimensions (W x D x H): 122 x 99 x 47 mm- Weight: 540 g |
|
| Lehle : 3@1 SGoS (95 comments)
Allows switching between different instruments in stereo via gold-plated contact relays- W...(+) Allows switching between different instruments in stereo via gold-plated contact relays- Without semiconductors, the signal from inputs A, B or C pass through outputs 1 or 2 unaltered. This makes it easy to switch between an amp and a tuner- Can be controlled via MIDI and networked with other Lehle SGoS switches- True bypass- LED: Effects On- Footswitch: Effects bypass- Input: 6.3 mm jack- Output: 6.3 mm jack- Power supply port (coaxial socket, 5.5 x 2.1 mm - negative polarity inside)- Power consumption: 97 mA- Powered via 8-20 V DC power supply (not included, suitable power supply available under Article Nr 409939 (not included))- Dimensions (W x D x H): 156 x 103 x 47 mm- Weight: 735 g- Made in Germany |
|
| Lehle : Dual SGoS (79 comments)
For two amps plus tuner with high impedance LTHZ transformer and gain reduction- The Lehle...(+) For two amps plus tuner with high impedance LTHZ transformer and gain reduction- The Lehle Dual switches the signal via gold-plated relays to outputs A, B or T- Outputs A and B can be operated at the same time on two different amps, since A to B is galvanically isolated by the high-end transformer Lehle LTHZ - ground loops are thereby excluded- With the potentiometers, the outputs A and B can be attenuated separately- The output T is available for a tuner or a third amp- The two inputs can be stereo-routed to outputs A and B.- In addition, the Lehle Dual has a gold-plated phase reversal and a ground switch- The Lehle Dual can be controlled via MIDI and networked with other Lehle SGoS switches- Power supply available as an option |
|
| Lehle : 1@3 SGoS (56 comments)
With loop for one instrument on up to three amps- The Lehle 1at3 routes the input signal a...(+) With loop for one instrument on up to three amps- The Lehle 1at3 routes the input signal as a true true bypass switcher via gold-plated relays to up to three outputs (eg. amps, tuners, effects)- If the input signal is only present on one of the outputs, then the ground connections are connected - ground loops are thereby excluded- The output C and the socket C-> B can also be used as a loop- Enabling you to switch to and fro between the pure original signal and the effects loop- The Lehle 1at3 can be controlled via MIDI and networked with other Lehle SGoS switches- Power supply available as an option |
|
| Lehle : P-Split Stereo (2 comments)
Two high-impedance Lehle Transformer HZs, each with phase and ground switch- Can be used a...(+) Two high-impedance Lehle Transformer HZs, each with phase and ground switch- Can be used as unbalanced or balanced- Passive - requires no power supply- Applications: Isolating a stereo signal (e.g. two amplifiers can be used in stereo and at the same time the stereo signal can be sent to a mixing console or audio interface of the DAW).- Splitting a stereo input signal to the galvanically isolated outputs (without hum loop)- Elimination of unwanted hum noises- Dimensions (W x D): 204 x 152 mm- Weight: 614 g- Input L (6.3 mm stereo jack)- Input R (6.3 mm stereo jack)- DIR Output L (6.3 mm stereo jack)- ISO Output L (6.3 mm stereo jack)- DIR Output R (6.3 mm stereo jack)- ISO Output R (6.3 mm stereo jack) |
|
| Lehle : Little Lehle III (20 comments)
Applications: Take effect pedals out of the signal path without further ado, and pick up a...(+) Applications: Take effect pedals out of the signal path without further ado, and pick up a signal at any point in the signal chain, e.g. to switch to a tuner or as a switch between two instruments to an amp or vice versa from an instrument between two amps.- Not only the signal, but also the signal ground is switched to avoid hum loops.- All jack sockets are stereo; symmetrical signals can also be transmitted- Mono and stereo signals can be combined- Three different operating modes: switch (latching), button (momentary) or mixed mode- Foot-switch: Loop On Off/Output- Input: 6.3 mm Stereo jack- Output: 6.3 mm Stereo jack- FX Send / Return: 2 x 6.3 mm Stereo jack- Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, minus pole inside- Current consumption: 70 mA- Power supply via 9-15 V DC power supply unit (not included in delivery, suitable power supply unit: Article Nr. 409939)- Dimensions (W x D x H): 90 x 96 x 47 mm- Weight: 350 g- Made in Germany |
|
| Lehle : D.Loop SGoS (71 comments)
With two independent, true True Bypass loops and switchable High End Bufferamp- The Lehle ...(+) With two independent, true True Bypass loops and switchable High End Bufferamp- The Lehle D.Loop is a fully programmable effect looper / switcher with two independent true bypass loops via gold-plated relays- It also has a switchable High End Bufferamp with adjustable gain up to +12 dB- Loops and buffer amp are fully stereo- The Lehle D.Loop can be controlled via MIDI and networked with other Lehle SGoS switches- Power supply available as an option |
|
| Lehle : Switch BTN (15 comments)
Momentary- Ideal for guitar or bass effect pedals- M12 stainless steel housing- Gold-plate...(+) Momentary- Ideal for guitar or bass effect pedals- M12 stainless steel housing- Gold-plated brass contacts- Service life: 1 million operations- Maximum pressure load of approx. 100 kg- Can also be operated by hand- Can be easily inserted into any hole for an M12 or 15/32 UNS thread- 2 Connections- Push-button diameter: 15.5 mm (0.61")- Total height: 22.3 mm (0.88")- Thread height: 15 mm (0.59")- Made in Germany |
|
| Footswitches Lehle Little Iii
The LITTLE LEHLE III allows you to remove effects pedals from your signal path at the pres...(+) The LITTLE LEHLE III allows you to remove effects pedals from your signal path at the press of a button. A signal can be picked off at any point in the signal chain, for example allowing you to switch to an instrument tuner. The LITTLE LEHLE III can also be used to switch between two instruments with one amp or, vice versa, between two amps with one instrument. Extremely diverse sound sources are no problem. Signals from pickups, microphones and keyboard line-out sockets are routed loss-free to a target amplifier or recorder. All jack sockets are stereo, so you can re-route balanced signals too. With the release of the LITTLE LEHLE III you can now combine mono and stereo signals. This will allow you to integrate an effects pedal with a mono input and stereo output into the signal path of the LITTLE LEHLE III without limitations. The LEHLE-Switch works with a microcontroller and an intelligent true bypass relay circuit with an active pop suppression function, thereby allowing the LITTLE LEHLE III to switch even faster than mechanical switches, noise free and without wear. The easy-action mushroom-shaped button characteristic of LEHLE products is mounted in the cover so that your foot pressure is transmitted indirectly via a spring. Thus the circuit board is not exposed to mechanical loads, making the LITTLE LEHLE III virtually indestructible and guaranteeing years of trouble-free switching. Not only is the stereo signal switched, but also the earth, - so say goodbye to hum when switching between two amps, and selecting effect loops - it just can\'t happen anymore. New for the LITTLE LEHLE III are the three operating modes, making the switch work as either a latching or momentary switch, allowing for short or rhythmic stutter-effects. The third mode combines a mixture of operating mode one and two: a short hit engages the latching function and a long hit is momentary. True Bypass effects looper and AB switch Hum-free and noiseless switching Three different operating modes: Latching, Momentary or Mixed Mode Mono and stereo functionality Active pop suppression circuit |
|