| MXR : M169 Carbon Copy Analog Delay
(497 comments)
- Analog delay- Up to 600 ms delay time- Analog signal path- True Bypass- Controls for Del...(+) - Analog delay- Up to 600 ms delay time- Analog signal path- True Bypass- Controls for Delay, Regen and Mix- Foot switch from metal- Sturdy metal housing- Runs on 9 V battery or via the Dunlop ECB-003 AC adapter (not included) |
|
| MXR : 10 Band Equalizer Silver
(148 comments)
- Graphic 10-band equalizer- / -12 dB boost or cut per frequency band- 2 Outputs for split...(+) - Graphic 10-band equalizer- / -12 dB boost or cut per frequency band- 2 Outputs for splitting the signal- Low noise, true bypass- Regulator for Volume Gain 31 Hz, 62 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz and 16 kHz- Illuminated sliders (status LEDs)- Aluminum housing- 6.3 mm mono jack input- 2 x 6.3 mm mono jack output- Power supply over 18 V DC Power supply Dunlop ECB-004 (2.1 x 5.5 mm hollow plug, polarity (-) inside, included)- Power consumption: 48 mA- Dimensions (L x W x H): 124 x 92 x 54 mm- Weight: 700 g |
|
| MXR : 6 Band Equalizer Silver
(58 comments)
- Graphical 6-band equalizer- / -18 dB boost or cut per frequency band- Illuminated slider...(+) - Graphical 6-band equalizer- / -18 dB boost or cut per frequency band- Illuminated sliders (status LEDs)- Low noise- True Bypass- Regulator for 100 Hz, 200 Hz, 400 Hz, 800 Hz, 1.6 kHz and 3.2 kHz- Aluminum housing- Power supply with 9 V battery or via 9 V DC power supply (2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included)- Power consumption: 14.5 mA- Dimensions (L x W x H): 110 x 60 x 50 mm- Weight: 350 g |
|
| MXR : M 234 Analog Chorus
(234 comments)
- Analog chorus pedal for electric guitar- EQ with controls for bass and treble- Effect co...(+) - Analog chorus pedal for electric guitar- EQ with controls for bass and treble- Effect control with controls for Level, Rate and Depth- Status LED- Stable metal casing- Operates with 9V battery or 9V DC power supply 409939 (not included) |
|
| MXR : Phase 90
(376 comments)
Effect Pedal- Rugged metal casing- Non-slip rubber base- Phaser with "Speed control"- Powe...(+) Effect Pedal- Rugged metal casing- Non-slip rubber base- Phaser with "Speed control"- Power supply: 9V battery or optional power supply available |
|
| MXR : Custom Shop Phase 90 LED
(186 comments)
Phaser- Design based on the cult pedal phaser- Speed controllable- 1/4 "jack In / Out- Can...(+) Phaser- Design based on the cult pedal phaser- Speed controllable- 1/4 "jack In / Out- Can be operated with a 9V battery or a separate power unit (not included) available under Article Nr 409939- LED indicates the switching status |
|
| MXR : 10 Band Equalizer Bundle
MXR 10 Band Equalizer Silver Effects Pedal-
Graphic 10-band equalizer-
/ -12 dB boost or...(+) MXR 10 Band Equalizer Silver Effects Pedal-
Graphic 10-band equalizer-
/ -12 dB boost or cut per frequency band-
2 Outputs for splitting the signal-
Low noise, true bypass-
Regulator for Volume Gain 31 Hz, 62 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz and 16 kHz-
Illuminated sliders (status LEDs)-
Aluminum housing-
6.3 mm mono jack input-
2 x 6.3 mm mono jack output-
Power supply over 18 V DC Power supply Dunlop ECB-004 (2.1 x 5.5 mm hollow plug, polarity (-) inside, included)-
Power consumption: 48 mA-
Dimensions (L x W x H): 124 x 92 x 54 mm-
Weight: 700 g Rockboard Pedalsafe Type D2 universal Protective Cover-
Suitable for Electro Harmonix, Keeley Electronics, MXR and many other pedals with large, horizontal housings and a configuration with two rows of pots-
Suitable for most effect pedals with housing dimensions of approx. 94 x 125 x 37 mm-
With base plate for mounting on pedalboards of any manufacturer-
Distance of mounting holes (W x D): 110 x 78-83 mm-
Protects effect pedals from dirt and weather influences-
Protects settings from unintentional adjustment-
Mounts effect pedals securely on almost all pedalboards-
No permanent modifications required-
Includes universal pedal mounting plate type D, silicone adhesive pad, spare screws and shim plate to slightly raise the height of pedals |
|
| MXR : 10 Band Equalizer Bundle RB
MXR 10 Band Equalizer Silver Effects Pedal-
Graphic 10-band equalizer-
/ -12 dB boost or...(+) MXR 10 Band Equalizer Silver Effects Pedal-
Graphic 10-band equalizer-
/ -12 dB boost or cut per frequency band-
2 Outputs for splitting the signal-
Low noise, true bypass-
Regulator for Volume Gain 31 Hz, 62 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz and 16 kHz-
Illuminated sliders (status LEDs)-
Aluminum housing-
6.3 mm mono jack input-
2 x 6.3 mm mono jack output-
Power supply over 18 V DC Power supply Dunlop ECB-004 (2.1 x 5.5 mm hollow plug, polarity (-) inside, included)-
Power consumption: 48 mA-
Dimensions (L x W x H): 124 x 92 x 54 mm-
Weight: 700 g Rockboard Pedalsafe Type D2 Rockboard Protective Cover-
Suitable for Electro Harmonix, Keeley Electronics, MXR and many other pedals with large, horizontal housings and a configuration with two rows of pots-
Fits most effect pedals with housing dimensions of approx. 94 x 125 x 37 mm-
With base plate for mounting on Rockboard pedalboards with click system-
Distance of QuickMount mounting holes (W x D): 110 x 78-83 mm-
Protects effect pedals from dirt and weather influences-
Protects settings from unintentional adjustment-
Mounts effect pedals securely on RockBoard pedalboards-
No permanent modifications required-
Includes QuickMount pedal mounting plate Type D for RockBoard pedalboards, spare screws and shim plate for easy lifting of pedals |
|
| MXR : M291 Dyna Comp Mini
(7 comments)
- MXR M291 Dyna Comp Mini, compressor effects pedal, combines classic tone and modern conv...(+) - MXR M291 Dyna Comp Mini, compressor effects pedal, combines classic tone and modern convenience in a housing that's nearly half the size of the original, rare CA3080 'metal can' integrated circuit (IC) yields quieter operation, greater transparency, and increased dynamic range, true bypass, controls for Output, Sensitivity, Attack switch toggles between slow and fast attack times, bypass footswitch, status LED, metal housing, 6.3 mm mono in / output jacks, power supply via optional 9V DC adapter (Dunlop ECB 003), 2.1 x 5.5 mm barrel plug, polarity (-) center, battery operation not supported, current draw 4 mA, dimensions (L x W x H) 90 x 40 x 55 mm / 3.54" x 1.57" x 2.16", weight ca. 160 g / 0.28 lbs |
|
| MXR : M290 Phase 95
(8 comments)
- MXR M290 Phase 95, phaser effects pedal, combines the Phase 45 and Phase 90 circuits in ...(+) - MXR M290 Phase 95, phaser effects pedal, combines the Phase 45 and Phase 90 circuits in one pedal, two switchable phasing styles (Vintage / Modern), true bypass, control for Speed, Script switch removes feedback for a lusher, more subdued sound, 45/90 switch selects Phase 45 or Phase 90 mode, bypass footswitch, status LEDs, metal housing, 6.3 mm mono in / output jacks, power supply via optional 9V DC adapter (Dunlop ECB 003), 2.1 x 5.5 mm barrel plug, polarity (-) center, battery operation not supported, current draw 8 mA, dimensions (L x W x H) 90 x 40 x 55 mm / 3.54" x 1.57" x 2.16", weight ca. 130 g / 0.28 lbs |
|
| MXR : Dynacomp
(302 comments)- |
|
| MXR : The Duke of Tone
(7 comments)
- Overdrive- Joint development by MXR and Analog Man- Controls for volume, drive, tone- Sw...(+) - Overdrive- Joint development by MXR and Analog Man- Controls for volume, drive, tone- Switch for boost / OD / distortion- Combination with other gain pedals leads to creative crunch sounds- Power supply via 9 V DC mains adapter (not included) |
|
| MXR : EVH Phase 90
(116 comments)
Phaser Effects UnitThe MXR EVH Phase 90 can be heard in the classic Van Halen guitar style...(+) Phaser Effects UnitThe MXR EVH Phase 90 can be heard in the classic Van Halen guitar style. This is how Eddie Van Halen "spiced up" his legendary Lead sound, especially on the early records. This can clearly be heard in his parade solo on "eruption".- Designed with Edward Van Halen- Switchable vintage and modern voicings- Very stable housing- Eddie's typical red-white-black striped appearance- Metal footswitch- Speed control- Script switch (allows you to switch between the vintage "Script Logo" or the more modern and aggressive "Block Logo" phaser sound.)- 1 Input- 1 Output- Bright blue status LED |
|
| MXR : M 228 Dyna Comp Deluxe
(7 comments)
- Compressor- Classic sound with modern features- Equipped with the rare CA3080 metal can ...(+) - Compressor- Classic sound with modern features- Equipped with the rare CA3080 metal can IC- Low-noise operation- High-transparency and increased dynamic bandwidth- Clean aperture for parallel compression- 2 Attack settings- True Bypass- Controls for Tone, Sensitivity, Output and Clean- Attack switch to choose between fast and slow attack- Status LEDs- Metal casing- 6.3 mm Mono jack input/output- Power supply with 9 V battery or 9 V DC (Dunlop ECB003) power supply (power supply not included) 2.1 mm x 5.5 mm hollow plug and polarity (-) inside- Current consumption: 11 mA- Dimensions (W x D x H): 112 x 60 x 52 mm- Weight: 310 g |
|
| MXR : M300 Reverb
(70 comments)
- Digital reverb with 6 modes- Controller for Tone, Decay and Mix- Bypass foot-switch- Int...(+) - Digital reverb with 6 modes- Controller for Tone, Decay and Mix- Bypass foot-switch- Internal Mono-stereo switch- True Bypass and optional Trails bypass- Status LED- 3 Bi-colour LEDs for display mode- 100% Analog Dry Path- 6.3 mm Stereo TRS input / output- Can be used as mono with normal instrument cables- 6.3 mm Expression pedal / CV input- Power consumption: 240 mA- Including power adapter |
|
| MXR : M 222 Talkbox
(84 comments)
- Suitable for guitars and keyboards- Offers the unique possibility to shape the sound wit...(+) - Suitable for guitars and keyboards- Offers the unique possibility to shape the sound with the mouth- Independent amplifier and loudspeaker - no separate amplifier is required- Volume and gain controls- Stable foot switch- Blue status LED- 6.3 mm Jack input and output- Pedalboard-friendly dimensions- Robust road-friendly housing- True Bypass- Incl. Dunlop 18V DC power adapter (DL E ERS ECB 004) |
|
| MXR : M299 Copy Mini Analog Delay
(29 comments)
- Analogue delay- Carbon Copy / Carbon Copy Bright switchable- Controls: True Bypass, Dela...(+) - Analogue delay- Carbon Copy / Carbon Copy Bright switchable- Controls: True Bypass, Delay, Rain and Mix- Internal trim pots for width and speed- Mod switch for activating the modulation- Bright switch to choose between Original and Bright Mode Bypass Footswitch- 6.3 mm Mono jack input / output- Mini housing format- Status LEDs- Power supply via 9 V DC power supply (2.1 mm x 5.5 mm coaxial connection, polarity (-) inside)- Power consumption: 26 mA- Dimensions (W x D x H): 40 x 90 x 55 mm- Weight: 130 g- Includes power supply |
|
| MXR : EVH-117 Flanger
(40 comments)
- With Edward Van Halen- EVH Switch- Very stable casing- Metal foot switch- Status Led- EV...(+) - With Edward Van Halen- EVH Switch- Very stable casing- Metal foot switch- Status Led- EVH Led- Suitable power supply 18 Volt available: Article 174583 (not included) |
|
| MXR : Supercomp M132
(106 comments)
Stomp Box- Compressor- Knobs for output, attack level and sensitivity (ratio)- Bypass mode...(+) Stomp Box- Compressor- Knobs for output, attack level and sensitivity (ratio)- Bypass mode- Indicator LED- Power supply via 9V battery (not included) or optional AC adapter |
|
| MXR : M303 Clone Looper
(18 comments)
- Up to 6 minutes of recording time- Stores recorded loops even when the pedal is off- Cha...(+) - Up to 6 minutes of recording time- Stores recorded loops even when the pedal is off- Change the speed of recorded loops to double-speed or half-speed, or reversing them- Unlimited overdubs- Sampling rate: 44.1 kHz- Storage sample rates up to 88.2 kHz- True/Buffered bypass (switchable)- Volume control- REC/DUB and PLAY/STOP footswitch- Status LEDs- Metal housing- 6.3 mm Mono jack input/output- 6.3 mm CTR input for connecting a MXR M199 tap tempo footswitch- 6.3 mm EXP input for connecting a Dunlop DVP volume (X) pedal- Tap functionality: 1x tap for loop speed, 3 sec tap loop forward/backward and 5 sec + REC for clear loop quietly- Powered via the included 9V DC power supply with 2.1 x 5.5 mm coaxial power connector, negative polarity (-) inside- Power consumption: 225 mA- Dimensions (L x W x H): 64 x 111 x 49 mm- Weight: 0.31 kg- Includes a Dunlop ECB003 power supply |
|
(Change geographical area)
GUITAR
