| Markbass : Standard 104HR-4Ohm
(17 comments)
- Configuration: 4x 10 " neodymium speaker custom made by B & C- Laterally adjustable 1 " ...(+) - Configuration: 4x 10 " neodymium speaker custom made by B & C- Laterally adjustable 1 " HF compression driver tweeter- Power rating: 800 Watt / 4 Ohm- Frequency response: 35 Hz - 20 KHz- Rear bass reflex- Weight: 22 kg- Dimensions (W x H x D): 59.5 x 60.5 x 48 cm (approximately) |
|
| Markbass : Cover For CMD121P
(145 comments)
- Suitable CMD121P- With embroidered logo MARKBASS |
|
| Markbass : Traveler 102P - 8Ohm
(131 comments)
- Power rating: 400 W- Impedance: 8 Ohm- Equipped with: 2 x 10" Neodymium magnet speakers ...(+) - Power rating: 400 W- Impedance: 8 Ohm- Equipped with: 2 x 10" Neodymium magnet speakers and an adjustable piezo tweeter- "Custom made" speaker by B&C- Frequency range: 45 - 18.000 Hz- Very light and compact- Bass reflex opening on the back- Dimensions (W x H x D): Approx. 595 x 330 x 433 mm- Weight: Approx. 12.6 kg |
|
| Markbass : Footswitch Dual
(6 comments)
- For Markbass Big Bang and Little Marcus- Functions for Big Bang: 1x Mute function and 1x...(+) - For Markbass Big Bang and Little Marcus- Functions for Big Bang: 1x Mute function and 1x Filter section- Functions for Little Marcus: On / off EQ1 and EQ2- 4.7 m Cable with stereo jack plug (6.3 mm |
|
| Markbass : Traveler 151P
(67 comments)
- 1x 15" neodymium speaker- Laterally adjustable piezo tweeter- Power rating: 400 W- Imped...(+) - 1x 15" neodymium speaker- Laterally adjustable piezo tweeter- Power rating: 400 W- Impedance: 8 Ohm- Frequency range: 40-18000 Hz- Ultra light and compact- Bass reflex port back- Dimensions (H x W x D): ca. 465 x 594 x 433 mm- Weight: 17.0 kg |
|
| Markbass : Cover 102 Traveler
(44 comments)- Original Markbass Protective Cover for 102P Traveler Cabinet |
|
| Markbass : New York 121
(49 comments)
- New York 121- 1 x 12" loudspeaker- Piezo tweeter- 400 Watt @ 8 Ohm- Frequency range: 45 ...(+) - New York 121- 1 x 12" loudspeaker- Piezo tweeter- 400 Watt @ 8 Ohm- Frequency range: 45 - 18,000 Hz- Weight: 13.3 kg- Dimensions (WxHxD): 383 x 432 x 358 mm |
|
| Markbass : Little Mark Tube 800
(68 comments)
- Tube preamp- 800 Watt at 4 Ohm- 500 Watt at 8 Ohm- Mix Controls Tube/Solid State- Pre/Po...(+) - Tube preamp- 800 Watt at 4 Ohm- 500 Watt at 8 Ohm- Mix Controls Tube/Solid State- Pre/Post switch- Controls for Volume, Bass, Low and High mid- Treble, master volume- Variable Pre Shape Filter- Vintage Speaker Emulator- Line Out, Effect Send and Return, LINE OUT: Balanced XLR, Tuner Out- Ultra light and compact, Weight approx. 2.9 kg- Dimensions (W x H x D) approx.: 27.6 x 7.1 x 25.6 cm- Optional matching rack adapter: Article Nr. 194574 (not included) |
|
| Markbass : Standard 104HF-4 Ohm
(27 comments)
- Configuration: 4 x 10" Neodymium speakers and laterally adjustable 1" HF Tweeter- "Custo...(+) - Configuration: 4 x 10" Neodymium speakers and laterally adjustable 1" HF Tweeter- "Custom made" Speakers by B & C- Power rating: 800 W into 4 ohms- Frequency response: 35 Hz - 20 kHz- Light and compact- Front bass reflex- Approximate dimensions (W x H x D ): 59.5 x 74 x 48 cm- Weight: 27.30 kg |
|
| Markbass : Mini CMD 121P IV
(6 comments)
- 1 Channel- Power: 500 Watt RMS @ 4 Ohm, 300 Watt RMS @ 8 Ohm- Equipped with: 1 x 12" spe...(+) - 1 Channel- Power: 500 Watt RMS @ 4 Ohm, 300 Watt RMS @ 8 Ohm- Equipped with: 1 x 12" speaker & 1" compression driver and custom horn tweeter- Frequency response: 45 - 20000 Hz- Controls: Gain, Low, Mid Low, Mid High, High, Old School, Line Out, Master- 3-Way switch: Flat / Scooped-mid / FSW- Input: 6.3 mm jack- Footswitch connection: 6.3 mm jack- Balanced line output: XLR- Effect return & send: 2x 6.3 mm jack- Tuner output: 6.3 mm jack- Closed cabinet- Bass reflex at rear- Light and compact design- Dimensions (W x H x D): approx. 38 x 42.5 x 36 cm- Weight: approx. 11.9 kg- Suitable protective cover: art.241660 and footswitch: art. 512098 (both not included in delivery) |
|
| Markbass : Little Mark Vintage
(5 comments)
- Very light and compact- Power: 500 W at 4 ohms / 300 W at 8 ohms- Tube preamplifier- Con...(+) - Very light and compact- Power: 500 W at 4 ohms / 300 W at 8 ohms- Tube preamplifier- Controls for DI, Gain, Limiter, Bass, Low and High Mids, Treble, Master Volume- 3-Way switch: Flat / Cut / Old- Pre / Post switch- Ground lift switch- Effects send and return: 6.3 mm jack- Line output: balanced XLR- Tuner output: 6.3 mm jack- Foot switch- Selected components- Gold-plated circuits- Dimensions (W x H x D): approx.27.6 x 8.3 x 25 cm- Weight: approx.2.5 kg |
|
| Markbass : Traveler 102P - 4Ohm
(36 comments)
- Equipped with: 2 x 10" Neodymium magnet speakers and an adjustable piezo tweeter- Power ...(+) - Equipped with: 2 x 10" Neodymium magnet speakers and an adjustable piezo tweeter- Power rating: 400 Watt at 4 Ohm- Frequency range: 45 - 18,000 Hz- Light and compact- Bass reflex opening on the back- Dimensions (W x H x D): approx. 595 x 330 x 433 mm- Weight: approx. 15 kg |
|
| Markbass : Cover f. CMD 151P/JB Player
(30 comments)
- Suitable for CMD JB Players School, CMD 151 P, NEW YORK 151 and NEW YORK 151 BLACK- With...(+) - Suitable for CMD JB Players School, CMD 151 P, NEW YORK 151 and NEW YORK 151 BLACK- With MarkBass logo |
|
| Markbass : MB58R 104 Energy Box
- Equipped with: 4x 10" neodymium speaker and 1" HF compression driver- Power rating: 800 ...(+) - Equipped with: 4x 10" neodymium speaker and 1" HF compression driver- Power rating: 800 W @ 4 Ohm- Frequency range: 35 - 20.000 Hz- Crossover frequency: 3.5 kHz- Sound pressure level: 103 dB SPL- Housing biodegradable- Dimensions (W x H x D): 57.8 x 60 x 47 cm- Weight: 15.75 kg- Made in Italy |
|
| Markbass : Little Mark Bag Small
(192 comments)
- For Markbass amplifiers- Suitable for all Little Mark and Little Marcus amp heads- Colou...(+) - For Markbass amplifiers- Suitable for all Little Mark and Little Marcus amp heads- Colour: Black |
|
| Markbass : Standard 151HR
(12 comments)
- Rated power: 400 W @ 8 - Equipped with: 1x 15" neodymium custom woofer (made by B&C) + ...(+) - Rated power: 400 W @ 8 - Equipped with: 1x 15" neodymium custom woofer (made by B&C) + lateral adjustable 1" compression driver tweeter- Speaker twist and jack- Quality 18 mm plywood- Stackable plastic corners- Solid metal grid- Tuned bass reflex port on the back- Durable felt cover- Frequency range: 40 Hz - 20 kHz- Efficiency: 100 dB- Weight: approx. 24 kg- Dimensions (W x H x D): 59.5 x 60.5 x 48 cm |
|
| Markbass : Little Mark 250 Black Line
(158 comments)
- Output Power: 250W at 4 - Transistor pre amp- Analogue power amp- Effect send / return (...(+) - Output Power: 250W at 4 - Transistor pre amp- Analogue power amp- Effect send / return (switchable pre / post)- 4-Band EQ (2 mid bands)- VPF and VLE regulator- XLR (balanced) and jack (6.3 mm) input- Line out regulated separately- Weight: 2.6 kg- Dimensions (H x W x D): 71 x 276 x 256 mm |
|
| Markbass : Little Mark 58R
- 1 Channel- Power: 500 W @ 4 Ohm, 300 W @ 8 Ohm- Bi-band limiter- Controls: Gain, Low, Mi...(+) - 1 Channel- Power: 500 W @ 4 Ohm, 300 W @ 8 Ohm- Bi-band limiter- Controls: Gain, Low, Mid/Low, Mid/High, High, Master, Line Out, Old Schoo- Switches: Pre/Post EQ, Ground Lift, Mute, Power- Three-way switch: Flat/Scooped Mid/FSW (sound selection via footswitch)- Effect loop-in: Serial- Input: 6.3 mm jack- Effects send & return: 2x 6.3 mm jack- Mute footswitch: 6.3 mm stereo jack- Line out: XLR- Speaker outputs: 2 x 6.3 mm jack & Speaker Twist [2-pol] @ 4-8 Ohm- Housing made of lightweight, environmentally friendly materials- Dimensions (W x D x H): 276 x 256 x 83 mm- Weight: 2 kg- Made in Italy- Matching footswitch: art.512098 (not included)- Matching Rackmount Markbass MB58R heads: Art.558771 (not included) |
|
| Markbass : Micromark 801
(199 comments)
- Power: 60 Watt @ 4 Ohm- Equipped with: 1 x 8" Custom Neodymium speaker- Analogue power a...(+) - Power: 60 Watt @ 4 Ohm- Equipped with: 1 x 8" Custom Neodymium speaker- Analogue power amplifier technology- Digital mains switch, VPF (Variable Preshape Filter)- External speaker output (min. 8 )- Input for CD/MP3-Player, iPod, etc. (3.5 mm mini jack), headphone connector (3.5 mm), line out (recording XLR balanced)- Switch speaker on/off- Switch ground lift- Dimensions (W x H x D): 268 x 268 x 262 mm- Weight: 6.6 kg |
|
| Markbass : Cover For CMD102P
(37 comments)- With embroidered logo MARKBASS |
|
BASS
