| One Control : Pedalboard Patchbay 4M (5 comments)
2 Pairs of 6.3 mm mono jack inputs / outputs- 2 Pairs of 6.3 mm stereo TRS inputs / output...(+) 2 Pairs of 6.3 mm mono jack inputs / outputs- 2 Pairs of 6.3 mm stereo TRS inputs / outputs- 1 Pair MIDI inputs / outputs- Passive operation- No power supply necessary- Metal housing- Dimensions (L x W x H): 66 x 112 x 48 mm- Weight: 360 g |
|
| One Control : Agamidae Tail Loop (6 comments)
Footswitches provide control over six independent loops- 100 Individually configurable pre...(+) Footswitches provide control over six independent loops- 100 Individually configurable presets (20 banks, 5 presets per bank)- 2 Selectable switching modes (Recall Mode, Direct/Edit Mode)- Master bypass function- 6x DC hollow plug outputs (2.1 x 5.5 mm) to loop through the power supply- True bypass- 6 footswitches (Bank/Loop 1, PGM 1/Loop 2, PGM 2/Loop 3, PGM 3/Loop 4, PGM 4/Loop 5, PGM 5/Loop 6)- Program / Direct selector switch- Status LEDs- Inputs/outputs: 6.3 mm jack plug- Power supply via 9 V DC mains adapter with 2.1 x 5.5 mm hollow female plug, polarity (-) inside (mains adapter not included)- Power consumption: max. 150 mA- Metal housing- Dimensions (L x W x H): 41 x 370 x 48 mm- Weight: 440 g |
|
| One Control : True Bypass Looper (26 comments)
Can be used as an A / B box or mute switch- True bypass- Bypass foot switch- Status LED- 6...(+) Can be used as an A / B box or mute switch- True bypass- Bypass foot switch- Status LED- 6.3 mm Mono jack input / output- 6.3 mm Mono jack send / return- Power supply via optional 9V DC power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply not included)- Passive operation without power supply possible (status LED without function)- Current consumption 1 mA- Metal housing- Dimensions (L x W x H): 101 x 53 x 49 mm- Weight: 127 g |
|
| One Control : Black Loop - A+B Switch (16 comments)
The foot switches provide control over two independent send / return loops- Can be used as...(+) The foot switches provide control over two independent send / return loops- Can be used as a tuner output / mute switch- 2 DC barrel connector outputs (2.1 x 5.5 mm) for looping through the power supply- True bypass- Loop 1 foot switch- Loop 2 foot switch- Status LEDs- 6.3 mm Mono jack input / output- 6.3 mm Mono jack send / return- Power supply via optional 9V DC power supply (2.1 x 5.5 mm barrel connector, polarity (-) inside - not included)- Current consumption 4 mA- Passive operation without power supply possible (status LEDs and DC barrel connector outputs without function)- Metal housing- Dimensions (L x W x H): 65 x 120 x 46 mm- Weight: 200 g |
|
| One Control : Pedalboard Patchbay BJF Buffer (1 comments)
High-quality BJF buffer (switchable)- Metal housing- Buffer / bypass switch- Polarity / re...(+) High-quality BJF buffer (switchable)- Metal housing- Buffer / bypass switch- Polarity / reverse switch- Input and output: 2 x 6.3 mm mono jacks each- Power supply via optional 9V DC power supply 2.1 x 5.5 mm hollow plug, polarity (-) inside- Power consumption: 3 mA- Dimensions (L x W x H): 46 x 94 x 40 mm- Weight: 220 g |
|
| One Control : Minimal Series AB Box (29 comments)
Can be used as an input or output selector switch- Input and outputs can be used in both d...(+) Can be used as an input or output selector switch- Input and outputs can be used in both directions- True bypass- Bypass foot switch- Status LEDs- Metal housing- 1 x 6.3 mm mono jack input- 2 x 6.3 mm mono jack output- Power supply via 9 V DC power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply not included)- Passive operation without power supply possible (status LED without function)- Current consumption: 1 mA- Dimensions (L x W x H): 101 x 54 x 48 mm- Weight 140 g |
|
| One Control : Gecko MKIII (22 comments)
2 MIDI outputs- 2 x 9 V outputs (coaxial connection 5.5 x 2.1 mm - negative polarity insid...(+) 2 MIDI outputs- 2 x 9 V outputs (coaxial connection 5.5 x 2.1 mm - negative polarity inside)- 20 Presets and program change- Recall / Direct / Flash Mode- Tap tempo switch for MIDI devices that support remote tap tempo control- Supports up to 16 MIDI devices on 16 MIDI channels- Power connector- Power supply via 9 V DC power supply (not included, matching power supply available under Art.409939)- Dimensions (W x D x H): 120 x 65 x 46 mm- Weight: 200 g |
|
| One Control : Iguana Tail Loop MKIII - 5 (1 comments)
The footswitches operate five independent loops and a separate tuner output- High-quality ...(+) The footswitches operate five independent loops and a separate tuner output- High-quality switchable BJF buffer- 7 x DC hollow plug outputs: 2.1 x 5.5 mm for looping through the power supply- True bypass- 6 Footswitches: Loop 1 to loop 5, tuner out/mute)- Status LEDs- Metal housing- Inputs and outputs: 6.3 mm mono jacks- Power supply via optional 9 V DC power supply unit 2.1 x 5.5 mm hollow plug, polarity (-) inside, not included in the delivery- Passive operation possible without power supply: Status LEDs, BJF buffer and DC hollow plug outputs then without function- Current consumption: max. 13 mA- Dimensions (L x W x H): 41 x 376 x 46 mm- Weight: 450 g |
|
| One Control : Minimal Series MIDI DS Loop (2 comments)
Bypass switching via MIDI- It can use between 1-8 MIDI channels to receive control signals...(+) Bypass switching via MIDI- It can use between 1-8 MIDI channels to receive control signals- It can be controlled via program change (PC) or control change (CC) signals- Mono and stereo signals can be processed variably- True bypass- Status LEDs- Metal housing- Input and output: 6.3 mm Mono jacks (TRS)- Send/return: 6.3 mm Mono jack (TRS)- 5-Pin MIDI input- Power supply via optional 9 V DC power supply unit 2.1 x 5.5 mm hollow plug, polarity (-) inside, not included in the delivery- Passive operation possible without power supply: Status LEDs, BJF buffer and DC hollow plug outputs then without function- Current consumption: max. 120 mA- Dimensions (L x W x H): 68 x 125 x 32 mm- Weight: 366 g |
|
| One Control : FS-P3 Footswitch for BJF-S66
Fits One Control BJF-S66- Switches FX Loop (On/Off), Channel Select and Tremolo (On/Off)- ...(+) Fits One Control BJF-S66- Switches FX Loop (On/Off), Channel Select and Tremolo (On/Off)- Separate status LEDs for each switch- Connection to amplifier via standard 6-pin RJ12 cable (included)- Dimensions (W x D x H): 18 x 5 x 4.2 cm- Weight: 0.58 kg |
|
| One Control : 360 AIAB - Bass Preamp
Amp-In-A-Box- Reproduces the sound and character of the Acoustic 360 preamp- Powerful, def...(+) Amp-In-A-Box- Reproduces the sound and character of the Acoustic 360 preamp- Powerful, defined bass sound that fits perfectly into the band structure- Flexible tone control with 3-band EQ- Developed by Bjorn Juhl- True bypass- Controls: Volume, treble, mid, bass- Bass: -26 to +6 dB at 32 Hz- Mid: -15 to +6 dB at 600 Hz- Treble: -26 to +20 dB at 3 kHz- Side switch for -18 dB mode- Bypass footswitch- Status LED- Brushed aluminium housing- Input: 6.3 mm mono jack- Output: 6.3 mm mono jack- Power consumption: 1.5 mA- Power supply via 9 V battery or 9 V DC mains adapter (both not included)- Mains adapter connection: Hollow female plug5.5 x 2.1 mm (negative pole inside)- Dimensions (L x W x H): 100 x 47 x 46 mm- Weight: approx. 160 g |
|
| One Control : Sonic Silver Peg - Bass Preamp (3 comments)
Bass preamp / Amp-In-A-Box- Reproduces the sound and character of a vintage Ampeg V4 amp- ...(+) Bass preamp / Amp-In-A-Box- Reproduces the sound and character of a vintage Ampeg V4 amp- Active mid EQ offers +/- 15 dB at 800 Hz- Tone control controls low-pass filter in a range of 300 - 10,000 Hz- Developed by Bjorn Juhl- Controls for volume, tone, mid- Side switch for -15 dB mode- Bypass footswitch- Status LED- Aluminium housing- True bypass- Input: 6.3 mm mono jack- Output: 6.3 mm mono jack- Mains adapter connection: Hollow female plug 2.1 x 5.5 mm (negative pole inside)- Power supply via 9 V DC mains adapter or 9 V battery (both not included)- Power consumption: 2 mA- Dimensions (L x W x H): 100 x 47 x 48 mm- Weight: approx. 160 g |
|
| One Control : Minimal Series White Loop (58 comments)2x 9V outputs- True bypass |
|
| One Control : Tri Loop - True Bypass Looper (4 comments)
4 Selectable modes for different applications: Red, Bright White, Blue, Green- Footswitche...(+) 4 Selectable modes for different applications: Red, Bright White, Blue, Green- Footswitches provide control over two independent send/return loops- Momentary circuit can be used as Normally Closed (NC) or Normally Open (NO)- Switchable buffer- 2 Footswitches: L and R- Status LEDs- Metal housing- True bypass- 1x Input: 6.3 mm mono jack- 1x Output: 6.3 mm mono jack- 1x Send: 6.3 mm mono jack- 2x Return: 6.3 mm mono jack- 1x TRS send: 6.3 mm stereo jack- Power supply connection: Barrel connector 5.5 x 2.1 mm (negative polarity inside)- Power supply via 9V DC mains adapter (not included in delivery)- Power consumption: max. 100 mA- Dimensions (L x W x H): 65 x 120 x 50 mm- Weight: 250 g |
|
| One Control : Caiman Tail Loop (OC10) (1 comments)
Programmable 10-channel true bypass loop switcher for effects pedals- Foot switches provid...(+) Programmable 10-channel true bypass loop switcher for effects pedals- Foot switches provide control over 10 independent loops and a separate tuner output- Extremely simple and intuitive programming- Link function offers the possibility of connecting two OC10s in two selectable modes (sync, download)- 70 Freely configurable presets (10 banks, 7 presets per bank)- 2 Selectable switching modes (Program Mode, Direct Mode)- Integrated BJF buffer circuit with separate inputs and outputs- 7 Serial loops and 3 separate loops- Separate loops can be used as amp footswitches (NO / NC)- Fully MIDI-capable with MIDI Out and MIDI In / Thru- True bypass- 10 Foot switches: PGM1 / L1, PGM2 / L2, PGM3 / L3, PGM4 / L4, PGM5 / L5, PGM6 / L6, PGM7 / L7, Bank Up / L8, Bank Dn / L9, Tuner / L10)- Link Config switch- MIDI on / off switch- 10 Push buttons for programming the presets- Status LEDs- 6.3 mm Mono jack inputs / outputs- 5-Pin MIDI input / output- Power supply via 9V DC power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply not included)- Current consumption: max. 450 mA- Metal housing- Dimensions (L x W x H): 110 x 462 x 64 mm- Weight: 1800 g |
|
| One Control : Basilisk MIDI Controller (1 comments)
Can send Program Change / Patch Change (PC) and Control Change (CC) commands- 128 Presets ...(+) Can send Program Change / Patch Change (PC) and Control Change (CC) commands- 128 Presets in 64 banks- 2 Presets per bank- Each preset has 5 PC and 5 CC numbers- Selection of presets possible via MIDI input- 4 Foot switches (1, 2, Down / Channel, Up / Bank)- 1 x 5-pin MIDI input- 2 x 5-pin MIDI output- Power supply via optional 9V DC power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside- Current consumption: max. 30 mA- Metal housing- Dimensions (L x W x H): 94 x 109 x 53 mm- Weight: 320 g |
|
| One Control : Xenagama Tail Loop MKIII
The footswitches operate three independent loops and a separate tuner output- High-quality...(+) The footswitches operate three independent loops and a separate tuner output- High-quality switchable BJF buffer- 4 x DC hollow plug outputs: 2.1 x 5.5 mm for looping through the power supply- True bypass- 4 Footswitches: Loop 1, loop 2, loop 3, tuner out/mute- Status LEDs- Metal housing- Inputs and outputs: 6.3 mm Mono jacks- Power supply via optional 9 V DC power supply unit 2.1 x 5.5 mm hollow plug, polarity (-) inside, not included in the delivery- Passive operation possible without power supply; Status LEDs, BJF buffer and DC hollow plug outputs then without function- Current consumption: max. 13 mA- Dimensions (L x W x H): 41 x 244 x 46 mm- Weight: 310 g |
|
| One Control : Min. Series Stereo 1 Loop Box (1 comments)
Designed for stereo setups with two amps, stereo effects, or for recordings and live situa...(+) Designed for stereo setups with two amps, stereo effects, or for recordings and live situations where you play directly into the mixer- Two selectable footswitch modes: Normal / Rapid, for latching or momentary operation- Switchable mono or stereo operation- Bypass footswitch- M/S slide switch- Status LED- Metal housing- Input / output (TRS): 6.3 mm stereo jack- Send / return (TRS): 6.3 mm stereo jack- Power supply via 9V DC power supply unit with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply unit not included in the delivery)- Power consumption: 100 mA- Dimensions (L x W x H): 98 x 48 x 35 mm- Weight: 127 g |
|
| One Control : Caiman Tail Loop (1 comments)
Programmable 5-channel true bypass loop switcher for effects pedals- Foot switches provide...(+) Programmable 5-channel true bypass loop switcher for effects pedals- Foot switches provide control over five independent loops and a separate tuner output- Extremely simple and intuitive programming- 150 Freely configurable presets (30 banks, 5 presets per bank)- 2 Selectable switching modes: Program Mode, Direct Mode- Integrated BJF buffer circuit with separate inputs and outputs- 2 Additional connections for switching signals (amp footswitch)- 5 MIDI PC and 5 CC signals can be stored in each preset- 6 x DC barrel connector outputs (2.1 x 5.5 mm) for looping through the power supply- True bypass- 6 Foot switches: Bank, PGM 1 / L 1, PGM 2 / L 2, PGM 3 / L 3, PGM 4 / L 4, PGM 5 / L 5, Mute / Foot Switch- Program / Direct switch- 3 Button switches for programming the presets- Status LEDs- 6.3 mm mono jack inputs / outputs- 5-Pin MIDI input / output- Power supply via 9V DC power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply not included)- Current consumption: max. 220 mA- Metal housing- Dimensions (L x W x H): 62 x 440 x 49 mm- Weight: 620 g |
|
| One Control : Chamaeleo Tail Loop MKII (3 comments)
Programmable 5-channel true bypass loop switcher for effects pedals- The foot switches pro...(+) Programmable 5-channel true bypass loop switcher for effects pedals- The foot switches provide control over five independent loops and a separate tuner output- Extremely simple and intuitive programming- 15 Freely configurable presets (3 banks, 5 presets per bank)- 2 Selectable switching modes (recall mode, direct mode)- Integrated BJF buffer circuit with separate inputs and outputs- Separate loop can be used as an amp footswitch (NO / NC)- 6 DC barrel connector outputs (2.1 x 5.5 mm) for looping through the power supply- True bypass- 6 Foot switches (Bank PGM 1 / L 1, PGM 2 / L 2, PGM 3 / L 3, PGM 4 / L 4, PGM 5 / L 5, Mute / Tuner Out)- Programming lock switch- 5 Push buttons for programming the presets- Status LEDs- 6.3 mm Mono jack inputs / outputs- Power supply via optional 9V DC power supply (2.1 x 5.5 mm barrel connector, polarity (-) inside - not included)- Power consumption max. 200 mA- Metal housing- Dimensions (L x W x H): 60 x 440 x 50 mm- Weight: 705 g |
|