| Seymour Duncan : Dave Murray Loaded Pickg. PL (19 comments)
Exactly this configuration uses Dave Murray (Iron Maiden) in his live guitars- Seymour Dun...(+) Exactly this configuration uses Dave Murray (Iron Maiden) in his live guitars- Seymour Duncan Hot Rails Humbucker in neck and bridge position- Seymour Duncan JB Jr. humbucker in the middle- Pickup cover- High quality control knobs- Potentiometer- 5-way switch- Output jack- "Pearloid" version with white pickup caps, control knobs and 5-way switch tip- Made in USA |
|
| Seymour Duncan : SPB-3 (365 comments)
For P-Style basses- Quarter-pound- Maximum output and extended frequency spectrum- The 1/4...(+) For P-Style basses- Quarter-pound- Maximum output and extended frequency spectrum- The 1/4 inch pole pieces provide the low end and punch, while the Seymourized coil tuning provides healthy sustain and harmonics.- For those who want a crisp, round sound- Used by the likes of Mark Hoppus (Blink-182 bassist) on his bass |
|
| Seymour Duncan : SMB-4A (65 comments)Alnico replacement pickup- 4-String Version- For music Man Basses |
|
| Seymour Duncan : Phat Cat Great P-90 Set Nickel (61 comments)
SPH90-1N on the neck and SPH90-1B on the bridge- High-output single coils- Alnico II magne...(+) SPH90-1N on the neck and SPH90-1B on the bridge- High-output single coils- Alnico II magnets- Reversed winding and polarity on neck pickup- DC resistance: 8.0 kOhm at the neck pickup and 8.5 kOhm at the bridge pickup- Resonant frequency: 6.3 kHz at the neck pickup and 6.05 kHz at the bridge pickup- Single-wire vintage connection cable- Airtight waxed- Nickel covers- Including complete fixing hardware- Made in USA |
|
| Seymour Duncan : SHR-1B WH (170 comments)
Humbucker with high output- Adjacent coils- Rich Sustain- The best humbucker in single coi...(+) Humbucker with high output- Adjacent coils- Rich Sustain- The best humbucker in single coil format- For bridge position- Colour: White |
|
| Seymour Duncan : Quarter Pound 5 BK (11 comments)
F-style- Passive split coil pickup for 5-string precision bass- Vintage output- 0.25" Alni...(+) F-style- Passive split coil pickup for 5-string precision bass- Vintage output- 0.25" Alnico V rod magnets- 14 kOhm DC resistance- Two-wire shielded connection cable- Sealed airtight with wax- Forbon bobbin- Colour: Black- Handmade in USA |
|
| Seymour Duncan : HyperSwitch Bluetooth Switch (3 comments)
Design, store and recall a whole range of pickup configurations with your smartphone- Incl...(+) Design, store and recall a whole range of pickup configurations with your smartphone- Includes coil splitting, capacitor switching, phase inversion, series and parallel configurations and more- Option to use the guitar's tone control, use the HyperSwitch's tone control or bypass the tone control altogether- Compatible with most passive single coils, single coil size humbuckers, full size humbuckers, stacked humbuckers and P-Rails- Smartphone apps available for iOS and Android- Powered by 9 V battery (battery not included)- Includes screwdriver and white switch cap |
|
| Seymour Duncan : SH-JB Hot Rodded Humbucker (657 comments)
SH-2n HJazz humbucker in the neck position- SH-4 JB humbucker in the bridge position- 4-Wi...(+) SH-2n HJazz humbucker in the neck position- SH-4 JB humbucker in the bridge position- 4-Wire- Ideal for all styles from aggressive blues, rock and all the way up to metal- Colour: Black- Screws and springs included |
|
| Seymour Duncan : Black Winter 7-String Set (12 comments)
High output humbucker Set- Passive mode- Especially for black metal, death metal and grind...(+) High output humbucker Set- Passive mode- Especially for black metal, death metal and grindcore- 4-Core cable- Splittable- Old-English Seymour Duncan logo- Colour: Black- Made in USA |
|
| Seymour Duncan : Power Stage 200 (20 comments)
Power: 200 watts into 4 ohms- Suitable for operation of guitar cabinets with 4-16 ohms- Su...(+) Power: 200 watts into 4 ohms- Suitable for operation of guitar cabinets with 4-16 ohms- Suitable for connection directly after effects units- Cab Sim and EQ can be switched on and off for headphone output and balanced out- 4-Band EQ (Bass +/- 10 dB at 87 Hz, Mid +/- 10 dB at 645 Hz, Treble +/- 8.5 dB at 4.4 kHz, Presence +/- 6.8 dB at 11.6 kHz)- Controls for Level, Bass, Mid, Treble, Presence, Phones- Cab Sim On/Off switch- EQ On/Off switch- Status LEDs for power supply- Power Amp Clipping and Preamp Clipping- Output impedance min. 4 Ohm- Input voltage 100-240 V AC- Dimensions (L x W x H): 157 x 127 x 63.5 mm- Weight: 1.3 kg- Power switch- 6.3 mm mono jack inputs/outputs- 6.3 mm headphone output- 3.5 mm jack aux input- XLR balanced output- Power socket |
|
| Seymour Duncan : ST59-1 Little '59 Tele BR BK (93 comments)
Humbucker in single coil- format- Direct exchange without modification of the instrument- ...(+) Humbucker in single coil- format- Direct exchange without modification of the instrument- Position: Bridge- Output: Medium- Connections: 4-wire- DC resistance: 17.7 kOhm- Magnet Material: Ceramic- Colour: Black- Made in USA |
|
| Seymour Duncan : SL59-1B Creme (34 comments)
Little '59 for strats- The legendary 1959 P.A.F- In single coil format- For bridge positio...(+) Little '59 for strats- The legendary 1959 P.A.F- In single coil format- For bridge position- Colour: Cream |
|
| Seymour Duncan : Power Stage 170 (76 comments)
Suitable for amplifying effect pedals- Small enough for pedalboards- Power: 170 W at 4 Ohm...(+) Suitable for amplifying effect pedals- Small enough for pedalboards- Power: 170 W at 4 Ohms- 3-Band EQ- 13 dB boost/cut in each frequency band- Controls for volume, bass, mid and treble- Power switch on the back- 1/4" mono-jack input/output on the back- Cold device plug on the back- Power status LED- Temperature status LED- O.C. status LED- Output impedance: 4-16 Ohms- Input voltage: 220-240V AC- Dimensions (L x W x H): 127 x 133 x 72 mm- Weight: 910 g- Made in USA |
|
| Seymour Duncan : Humbucker Cover Nickel (35 comments)
Suitable for all regular 6-string humbucker models- Made from nickel silver- Max. string s...(+) Suitable for all regular 6-string humbucker models- Made from nickel silver- Max. string spacing: 49 mm- Dimensions (L x W x H): 37.8 x 69.6 x 15.5 mm |
|
| Seymour Duncan : Quarter Pound Jazz Bass Set (81 comments)
For 4-string bass- Passive design- 1/4" Alnico V magnets- High output- Calibriated set- DC...(+) For 4-string bass- Passive design- 1/4" Alnico V magnets- High output- Calibriated set- DC resistance neck: 13.9 kOhms- DC resistance bridge: 14.61 kOhms- Resonance-frequency neck: 4.3 kHz- Resonance-frequency bridge: 3.9 kHz- Neck-pickup with opposite winding direction and reversed polarity (RWRP) for the Humbucking-Effekt- Made in USA |
|
| Seymour Duncan : SJ5-3S J-Set (36 comments)
Quarter pound for 5-string J-style bass®- SJ5-3 High-output true single-coil- Perfect for...(+) Quarter pound for 5-string J-style bass®- SJ5-3 High-output true single-coil- Perfect for blues, classic rock, garage, heavy rock and nu metal |
|
| Seymour Duncan : SH-8b Invader Bridge 8 BL
Humbucker- For bridge position- High output- Deep low-end response with crunchy, defined h...(+) Humbucker- For bridge position- High output- Deep low-end response with crunchy, defined highs- Passive mount- Dual coil- Overwound- Magnet material: ceramic- Internal hexagonal pole pieces- Wax sealed- DC resistance: 22.1 kOhm- Shielded 4-wire connection cable- Colour: Black- Made in USA |
|
| Seymour Duncan : SH-4BK (237 comments)
Singing mids with raised output signal- Perfect mixture of sustain and distortion- Particu...(+) Singing mids with raised output signal- Perfect mixture of sustain and distortion- Particularly suitable for rock and blues- Colour: Black |
|
| Seymour Duncan : Dave Murray Loaded Pickg. BK (15 comments)
Dave Murray signature model- Seymour Duncan Hot Rails Humbucker in neck and bridge positio...(+) Dave Murray signature model- Seymour Duncan Hot Rails Humbucker in neck and bridge position- Seymour Duncan JB Jr. humbucker in the middle- Pickup cover- With high-quality control knobs- Potentiometer- 5-way switch- Output jack- Black design with black pickup caps, control knobs and 5-way switch tip- Made in USA |
|
| Seymour Duncan : Power Stage 700 (15 comments)
Suitable for direct connection with effects devices- Power: 700 W @ 4 Ohms/350 W @ 8 Ohms-...(+) Suitable for direct connection with effects devices- Power: 700 W @ 4 Ohms/350 W @ 8 Ohms- 3-Band EQ- 13 dB boost/cut in each frequency band- Speaker simulation- Controls for volume, bass, mid and treble- Power switch on the back- 1/4" Mono-jack (L/R) inputs on the backside- 2 (L/R) Speaker Twist/6.3 mm combo outputs on the rear- 2 (L/R) XLR outputs on the backside- 2 Cab Sim switches (one for each XLR output) on the rear- Cold device plug on the back- Power status LED- Temperature status LED- O.C. status LED- Output impedance: 4-8 Ohms- Input voltage: 100-230V AC- Dimensions (L x W x H): 292 x 176 x 56 mm- Weight: 2.860 g- Made in USA |
|