| Stairville : DMX Splitter 4 MK3 19"
(103 comments)
- 1 DMX Input: 3-Pin and 5-pin XLR- 1 DMX Thru: 3-Pin and 5-pin XLR- 4 DMX Outputs: 3-Pin ...(+) - 1 DMX Input: 3-Pin and 5-pin XLR- 1 DMX Thru: 3-Pin and 5-pin XLR- 4 DMX Outputs: 3-Pin and 5-pin XLR- Galvanically isolated in- and output- Power consumption: Max. 6W- DMX Status display per output- Format: 19" / 1U |
|
| Stairville : IP Bar IR Remote
(777 comments)
- Suitable for Stairville IP Bar, Stairville Stage TriLED Bundle, CLB4, CLB5, CLB2.4, Fun ...(+) - Suitable for Stairville IP Bar, Stairville Stage TriLED Bundle, CLB4, CLB5, CLB2.4, Fun Generation LED Pot 12x1W RGBW- For adjusting colours and setting functions- Includes 1x CR2025 battery, 3 V |
|
| Stairville : DS-2 RF DMX
(214 comments)
- With external fader for manually setting the output power (also usable as pre-heat funct...(+) - With external fader for manually setting the output power (also usable as pre-heat function)- Max. Power: 10 A / 6 A for inductive loads- The DS-2 can be set as a dimmer or switch pack via the menu- DMX address and set the functions via display- DMX input and output: 3-Pin XLR- Power supply: AC 230 V ~ 50 Hz- 10 A max. (inductive load max 6 A)- Dimensions: 182 x 92 x 65 mm- Weight: 1.1 kg |
|
| Stairville : DMX Splitter Pro 3+5 pin
(55 comments)
- Suitable for trusses or rig assemblies- Distributes, amplifies and buffers effectively D...(+) - Suitable for trusses or rig assemblies- Distributes, amplifies and buffers effectively DMX-512 signals- 3 + 5-pin XLR DMX input- 3 + 5-pin XLR DMX output for looping through (passive)- Fully active isolated DMX outputs: 4x 5-pin XLR, 4x 3-pin XLR- Inputs and outputs galvanically isolated up to 2 kV- Power Twist input and output- Power supply: AC 230 V, 50 Hz- Dimensions (L x W x H): 156 x 120 x 120 mm- Weight: 1.30 kg- Includes Power Twist cable |
|
| Stairville : DDS-405 DMX Dimmer and Switcher
(398 comments)
4-Channel Dimmer and Switchpack- Can be loaded with 4.5 A per channel- Total load: 16 A- 3...(+) 4-Channel Dimmer and Switchpack- Can be loaded with 4.5 A per channel- Total load: 16 A- 3-Pin DMX input and output- Protective contact Sockets on the side with protective flaps (blue)- LED display with membrane keyboard- Built-in microphone with sensitivity control for stand-alone mode- Individual DMX addressing per channel- Pre-programmable chaser (running light)- Integrated chaser with speed control- Dimensions (W x D x H): 20 x 6.5 x 18 cm- Weight: 1.6 kg- Made in Europe |
|
| Stairville : DDS-405 LC DMX 4 Ch. Dimmer
- With integrated faders for control on the device- Single channel fader and master dimmer...(+) - With integrated faders for control on the device- Single channel fader and master dimmer- 4 Protected contact sockets to connect the headlights- Display with 4 buttons for configuration- Independent DMX addressing for each channel- Automatic programs- Music Control and Master/Slave- Includes mains cable and mounting bracket- Load per channel: Max. 5 A- Total load: Max. 10 A- Output power: Max. 1000 W at 100 V / 2000 W at 240 V- Control: DMX (4 channels)- DMX input and output: XLR 3-pin and 5-pin- Power input: Power Twist- Black metal housing- Protection class: IP20- Power supply: 100 - 240 V- Dimensions: 265 x 220 x 84 mm- Weight: 2.9 kg |
|
| Stairville : DMX Splitter 8 USB 3 pin
(100 comments)
- For 19" rack mounting- With two 5V 1 A USB ports- Eight galvanically isolated outputs- S...(+) - For 19" rack mounting- With two 5V 1 A USB ports- Eight galvanically isolated outputs- Status LEDs for each input and output- All connections are installed on the front of the device- Power switch- DMX inputs and outputs: XLR 3-pin- Eight isolated outputs- DMX Thru with terminal function (switchable resistor)- Eight power and signal LEDs- Fixed power cord- Power supply: AC 230 V / 50 Hz- Power consumption: 15 W- Dimensions: 482 x 44 x 150 mm- Weight: 3 kg |
|
| Stairville : RJ45 DMX Shuttle Snake FX4
(61 comments)
- Cable length: 90 cm- RJ45 Cable connector to 4x DMX XLR 3-pin female- With color codings...(+) - Cable length: 90 cm- RJ45 Cable connector to 4x DMX XLR 3-pin female- With color codings on the DMX cables for the easy separation of channels- Equipped with 110 ohm DMX cables- Colour: Black |
|
| Stairville : DMX-Master I
(1034 comments)- |
|
| Stairville : DR-1 DMX Recorder 19" SD
- DMX-512 input (3 pin XLR) to record light shows in real time- 2 Modes (Record and Play m...(+) - DMX-512 input (3 pin XLR) to record light shows in real time- 2 Modes (Record and Play mode) memory for a total of 12 shows (with speed that can be varied)- SD card slot (all files are immediately/directly stored on the card)- DMX-512 output- 3-Pin XLR- 2 Different play modes (Solo Run and Loop Run Mode)- Internal clock for time-controlled shows- A total of 21 start or end times- 3 Timings a day- Software update via SD card- Power supply: 9-12V DC Min 300 mA- DMX input and output: 3 pin XLR- SD card: 4G or higher- Measurements: 483 x 44.5 x 105 mm- Weight: 1.5 kg |
|
| Stairville : WLS-DMX Pro G5
(13 comments)
- Original Wireless Solution G5 radio unit- Latency-free wireless transmission of DMX sign...(+) - Original Wireless Solution G5 radio unit- Latency-free wireless transmission of DMX signals- High operational reliability and range- Simple and clear operation- Quick change between transmit and receive mode- Key lock prevents unintentional change of operating mode- All parameters such as signal strength, operating mode and active signal transmission are visible at a glance- Quick mounting in the rig thanks to omega bracket with quick-lock fasteners- High-quality plug connectors- Detachable antenna- No license is required and no charges are incurred when used anywhere in worldwide- Supports DMX and RDM- DMX input and output: 3-pin XLR- Power input: Power Twist TR1- Frequency: 2.4 GHz- Power supply: 230 V @ 50 Hz- Power consumption: approx. 6 watts- Dimensions without antenna and omega bracket (W x H x D): 145 x 58 x 107 mm- Weight: 0.9 kg- Includes mains cable- Suitable case for 4 units: Art.504745 (not included in delivery) |
|
| Stairville : LED Pixel Rail Drive 640 MKII
(7 comments)
- For up to 16 pieces Stairville LED Pixel Rail 40 RGB MKII- Supports the protocols DMX (8...(+) - For up to 16 pieces Stairville LED Pixel Rail 40 RGB MKII- Supports the protocols DMX (8 CH) and Artnet (max. 4x 480 CH)- Power supply: 100 - 240 AC, 60 / 50 Hz- Fuse: F5AL / 250 V- Max. power consumption: 400 W (full power)- Control options: DMX (10/55 channels), ArtNet (4x480 channels), RDM- Internal effects: 30 Programs- Power input and output: Power Twist- DMX input and output: 3-pin and 5-pin XLR- Network: RJ45 in and out- Cooling: Convection- Dimmer: 0 - 100%- Strobe: 0 - 25 Hz- Cabinet: Die-cast aluminium- Protection: IP20- Dimensions (L x W x H): 290 x 205 x 85 mm- Weight: 3.7 kg- Colour: Black |
|
| Stairville : DDC-6 DMX Controller
(579 comments)
- 6-Channel light mixer with master fader- Compact design and easy to operate- Power input...(+) - 6-Channel light mixer with master fader- Compact design and easy to operate- Power input: DC 9V- DMX output: XLR 3-pin- Dimensions (L x H x W): 173 x 154 x 60 mm- Weight: 0.8 kg- External power adapter included |
|
| Stairville : Strobe-Master I
Strobe Controller- For all DMX- and analog strobes- The controller has 10 different progra...(+) Strobe Controller- For all DMX- and analog strobes- The controller has 10 different programs, Blackout, Single Flash, and Full on- Speed and brightness are adjustable via the fader- Power supply is included: DC9V 500 mA- Dimensions: 210 x 133 x 77 mm- Weight: 0.8 kg |
|
| Stairville : RJ45 DMX Split Box FX4
(71 comments)
- RJ45 Socket to 4x DMX XLR 3 pin female sockets- Colour: Black- Dimensions approx.: 107 x...(+) - RJ45 Socket to 4x DMX XLR 3 pin female sockets- Colour: Black- Dimensions approx.: 107 x 70 x 34 mm |
|
| Stairville : D1210H Digital Dimmerpack
(17 comments)
Dimmer- Supply voltage via 3 phase connector with 32 Amp current limiter- 10 A maximum loa...(+) Dimmer- Supply voltage via 3 phase connector with 32 Amp current limiter- 10 A maximum load per channel- Single channel circuit breaker- 2 x 16 pin Harting output- DMX 512 via 3 pin socket- Dimensions (L x W x H): 483 x 390 x 89 mm- With 32 A CEE plug- Weight: 14.5 kg |
|
| Stairville : DMX Joker 512 Stand Alone MKII
- DMX light control software with stand-alone interface for Windows and Mac OS X- Ideal DM...(+) - DMX light control software with stand-alone interface for Windows and Mac OS X- Ideal DMX control software for lighting engineers, bands, stage builders, architects, etc.- This easy to use yet comprehensive DMX software works on both Windows and Mac and is equipped with many control options for moving heads, LED lights, dimmers, etc.- Includes USB DMX Interface for 512 channels- Languages: German, French, English, Spanish, and Chinese- Features: Effect generator for pan/tilt movements and RGB colours- Graphical DMX addressing- Profile editor for creating your own device profiles- Large device library with more than 3,000 existing profiles- Advanced matrix editor to control LED matrices- Stand-alone mode with many functions such as starting scenes at a given time- The shows can be played back at the desired date/day/time with the real-time clock- Many different trigger modes (program timers)- Graphical and user-friendly live board to manually recall programs and scenes- Alongside the active scene, several different programs can be recalled- The stand-alone box has 8 program buttons with LED lighting for recalling different programs and scenes; additionally, the speed and the overall brightness can be changed by means of the stand-alone box; no computer is needed for operation- DMX input and output: 1x XLR 3-pin (female)- Compatible with Mac OS X (10.13 or higher), Windows, and Linux (64 bit)- USB cable, USB-DMX interface (512 channels) and power supply included |
|
| Stairville : DMX Joker IR Remote
(5 comments)
- Suitable for Stairville DMX interfaces with built-in IR receiver- Includes 1x CR2025 / 3...(+) - Suitable for Stairville DMX interfaces with built-in IR receiver- Includes 1x CR2025 / 3 V battery- DMX Joker 128 USB DMX Box (Article number 404063)- DMX Joker 512 MK2 USB-DMX Box (Article number 384079)- DMX Joker Pro 1024 USB DMX Box (Article number 404045)- DMX Joker Pro NET 16 (Article number 404058)- DMX Joker Pro NET 64 (Article number 404060)- DMX Joker Pro NET 128 (Article number 404061) |
|
| Stairville : D610S Dimmerpack
(43 comments)
DimmerFully digital internal control system (10 bit resolution). Device operation includes...(+) DimmerFully digital internal control system (10 bit resolution). Device operation includes a preheat and testing option. The status display provides detailed functional information. Due to the large cooling fins and intelligent cooling control the fans only run during high loads.- Controllable via DMX 512- Supply voltage via 3 phase connector with 32 Amp current limiter- 10 Amp maximum load per channel- 10 A Single channel circuit breaker (c-characteristics)- 6 x Safety plug sockets on the rear- DMX 512 via 3 Pin XLR-Socket on the front panel- Dimensions: 483 x 390 x 90 mm (L x W x H)- Weight: 8.60 kg- Made in Europe |
|
| Stairville : JSW-15 Joker Switch MK2
- For DMX Joker Stand Alone Box- The perfect solution for bands, entertainers, DJs to cont...(+) - For DMX Joker Stand Alone Box- The perfect solution for bands, entertainers, DJs to control the DMX Joker Stand Alone on stage- Simply connect the DMX USB box to the JSW-15 via network and XLR cable and the footswitch works- 15 foot switch- On/off with LED status indicator- Neutrik NE8FBV RJ45 jack and Seetronic XLR-3pin jack- Dimensions: 600 x 217 x 45 mm- Weight: 3.5 kg- Colour: Black |
|
(Change geographical area)
CONCERT LIGHTING
