| Voodoo Lab : Pedal Cable PPL6-R
Power Cable- Cable with 2.1 mm and 2.5 mm (red) angle coaxial connector and reversed polar...(+) Power Cable- Cable with 2.1 mm and 2.5 mm (red) angle coaxial connector and reversed polarity (center plus) - Suitable for line 6 DL4 / MM4 digital modelling, eventide factor, some Electro-Harmonix pedals and Voodoo Lab pedal switcher and control switcher - Power supply connection: 2.1 mm angle coaxial connector - Pedal connection: 2.5 mm angle coaxial connector - Polarity: reversed (centre plus) - Length: 46 cm |
|
| Voodoo Lab : Pedal Power Cable PPREV-R
(78 comments)
Power Cable- Cable with two 2.1 mm angled coaxial connectors and reversed polarity (center...(+) Power Cable- Cable with two 2.1 mm angled coaxial connectors and reversed polarity (center plus) - Suitable for some Fulltones, some Moogerfoogers, JangleBox and other pedals - Power supply connection: 2.1 mm angle coaxial connector - Pedal connection: 2.1 mm angle coaxial connector - Length: 46 cm |
|
| Voodoo Lab : Pedal Power Cable PPMIN-R
(16 comments)
AC Adapter Connection Cable- Power supply connector: 2.1 mm coaxial plug (angle) - Pedal c...(+) AC Adapter Connection Cable- Power supply connector: 2.1 mm coaxial plug (angle) - Pedal connector: 3.5 mm mini jack (angle) - Polarity: Standard (positive tip) - The 3.5mm miniplug cable connection is compatible with older / vintage pedals such as MXR, DOD, Electro-Harmonix, Pro Co (Rat-series), clone Centaur and vintage (non-LED) Voodoo Lab - Length: 46 cm |
|
| Voodoo Lab : Pedal Power Cable PPBAR-R24
(2 comments)
Power cable- Power supply connector: 2.1 mm right-angle coaxial connector - Pedal connecti...(+) Power cable- Power supply connector: 2.1 mm right-angle coaxial connector - Pedal connection: 2.1 mm right-angle coaxial connector - Polarity: Standard (middle minus) - Length: 61 cm |
|
| Voodoo Lab : Pedal Power Cable PPMIN
(40 comments)
Pedal Power Cable- Power supply: 2.1 mm Coaxial plug (straight) - Pedal connection: 3.5 mm...(+) Pedal Power Cable- Power supply: 2.1 mm Coaxial plug (straight) - Pedal connection: 3.5 mm mini jack plug (straight) - Polarity: Standard (Tip Positive) - The 3.5mm Mini-jack cable connection is compatible with older / vintage MXR, DOD, Electro-Harmonix, Pro-Co (Rat Series), Clone Centaur and Vintage (non-LED) Voodoo Lab pedals - Length: 46 cm |
|
| Voodoo Lab : Pedal Power Cable PPBAT
Power Cable- Battery clip works with any effect of running on 9V battery including vintage...(+) Power Cable- Battery clip works with any effect of running on 9V battery including vintage pedals without power supply jacks - Power supply connection: 2.1 mm Angle coaxial connector - Pedal connection: 9V battery clip - Length: 46 cm |
|
| Voodoo Lab : Current Doubler Adapter PPAP
(147 comments)
Connecting Cable to Pedal Power Supply- For pedals with higher performance requirements (m...(+) Connecting Cable to Pedal Power Supply- For pedals with higher performance requirements (mA) you can use a current doubling adapter to combine two isolated multi power supplies - Power supply: 2 x 2.1 mm coaxial plug - Pedal connector: 2.1mm coaxial socket - Polarity: Standard (centre minus) - Length: 10 cm |
|
| Voodoo Lab : Voltage Doubling Cable PPEH24
(32 comments)Convient pour les appareils suivants: |
|
| Voodoo Lab : Voltage Doubling Cable PPY
(156 comments)
Voltage Doubler Cable- Pedals with higher voltage requirements can use this voltage double...(+) Voltage Doubler Cable- Pedals with higher voltage requirements can use this voltage doubler cable to combine two isolated power supply multi-outputs and thus provide 18 V or 24 V - Suitable for various MXR Dunlop Fulltone and Keeley pedals - Power supply: 2 x 2.1 mm coaxial - Pedal connector: 2.1mm coaxial - Polarity: Standard (center minus) - Length: 46 cm |
|
(Change geographical area)
GUITAR
