| the t.bone : MS 180 (6230 comments)
Mounting Popkiller- With elastic arm- Arm length: 20 cm- Edge-Ring: Ø 15.5 cm- Nylon-Cover...(+) Mounting Popkiller- With elastic arm- Arm length: 20 cm- Edge-Ring: Ø 15.5 cm- Nylon-Cover: Ø 14 cm |
|
| DPA : DAD6034 (106 comments)
Adapter- For the Sennheiser EW Series |
|
| Roadworx : MSM 2000 (54 comments)
- For all microphones from 22 - 62 mm diameter- With adjustable pop filter- Reduces handli...(+) - For all microphones from 22 - 62 mm diameter- With adjustable pop filter- Reduces handling noise and minimises pop sounds- internal thread: 5/8" and 3/8"- Colour: Black |
|
| XVive : P1 Portable Phantom Power Sup. (55 comments)
- For phantom powering of microphones and DI boxes- Switchable output voltage of 12 V / 48...(+) - For phantom powering of microphones and DI boxes- Switchable output voltage of 12 V / 48 V- Low-noise design provides power supply without background noise- Rechargeable battery allows mobile use in all conceivable set-ups- Compact, robust construction- Status LEDs- On/Off switch- XLR input (Female) and XLR output (Male)- Micro USB-B input for recharging the battery- Lithium-ion battery (2,200 mA / 3.7 V)- 14 - 40 hours battery life- 2.5 - 3 hours to fully charge- Dimensions (L x W x H): 105 x 44 x 33 mm- Weight: approx. 145 g |
|
| Shure : RK 143 G (554 comments)
Replacement Grille- For Shure SM 58 |
|
| Shure : A25D Microphone Clamp (1337 comments)
Microphone holder / Microphone clamp- Incl. adapter- PG48- PG57- PG58- SM48- SM57- SM58- S...(+) Microphone holder / Microphone clamp- Incl. adapter- PG48- PG57- PG58- SM48- SM57- SM58- SM86- SM87- SM94- Beta 57- Beta 58- Beta 87 |
|
| K&M : 210/9 Black (1776 comments)
Microphone Stand- Similar to K&M 210/2 but with telescopic boom arm- Diecast base- Foldabl...(+) Microphone Stand- Similar to K&M 210/2 but with telescopic boom arm- Diecast base- Foldable legs- Wide base- Height is adjustable from 900 to 1600 mm- Colour: Black- Boom arm length: 460 - 770 mm- Weight: 3.2 kg |
|
| Gravity : MA Goose XL (251 comments)
- 3/8" Internal thread to 3/8" external thread- Diameter: 15 mm- Length: 600 mm- Colour: B...(+) - 3/8" Internal thread to 3/8" external thread- Diameter: 15 mm- Length: 600 mm- Colour: Black |
|
| the t.bone : Micscreen XL (493 comments)
- Reduces the transmission of unwanted room effects such as reflections, background noise ...(+) - Reduces the transmission of unwanted room effects such as reflections, background noise and echoes via the microphone- Portable and equally suitable for studio, live applications, vocal and instrument acceptance- The 5 segments of the screen can be opened and closed in different positions and can therefore be easily adapted to the shooting situation- Can be mounted on any standard microphone stand or placed directly on a table top without a tripod- Width: 16 - 80 cm (each segment is 16 cm wide)- Height: 32 cm- Weight: Approximately 2.70 kg |
|
| Rode : Boompole (214 comments)
Boom Pole- Made of black anodised aluminium- Usable length: From 0.84 to 3 m- Internal cab...(+) Boom Pole- Made of black anodised aluminium- Usable length: From 0.84 to 3 m- Internal cable routing possible- Compatible with all standard 3/8" threads- Weight: 950 g |
|
| KandM : 211/1 Black (403 comments)
Boom arm- Extendable tube construction- With 3/8" thread, locking washer and a handgrip.- ...(+) Boom arm- Extendable tube construction- With 3/8" thread, locking washer and a handgrip.- Tightening with a handy T-bar locking screw- Silent adjustment and tilting- No scratches on the tube surface due to plastic sleeves in the steel part- Threaded connector 3/8"- Boom arm length: 470-770 mm- Weight: 0.78 kg- Colour: Black |
|
| KandM : 21140 (357 comments)
Boom arm- Extendable tube construction- With 3/8" thread connector- Locking washer and a h...(+) Boom arm- Extendable tube construction- With 3/8" thread connector- Locking washer and a handle- Tightening with a handy T-bar locking screw- Silent adjustment wtihout scratches on the tube surface- Thread connector for stand: 3/8 "- Boom arm length: 425 to 725 mm- Weight: 0.6 kg- Colour: Black |
|
| the t.bone : Windscreen WS60 (1467 comments)
Windscreen- Internal diameter: 40-50 mm- Suitable for all the common microphones (e.g. Shu...(+) Windscreen- Internal diameter: 40-50 mm- Suitable for all the common microphones (e.g. Shure SM58)- Colour: Black |
|
| Millenium : MS 2003 (8352 comments)- |
|
| DPA : DAD6001-BC (36 comments)XLR Phantom Power Adapter P48- For DPA systems- With belt clip |
|
| Sennheiser : MZH 3042 (16 comments)
Gooseneck- Length: 400 mm- Diameter: 6 mm- Weight: 110 g- 2 Hinges- XLR connector- For ME3...(+) Gooseneck- Length: 400 mm- Diameter: 6 mm- Weight: 110 g- 2 Hinges- XLR connector- For ME34/35/36- Colour: Matte black |
|
| the t.bone : SM58 Replacement Screen (812 comments)Replacement Screen- Suitable for Shure SM58 and Beta 58 microphone- Incl. foam insert |
|
| Rode : PSM1 (252 comments)
Spider Shock Mount- Compatible with Rode Podcaster, NT1-A, NT2-A, NT1000, NTK and Procaste...(+) Spider Shock Mount- Compatible with Rode Podcaster, NT1-A, NT2-A, NT1000, NTK and Procaster- Colour: Black |
|
| the t.bone : Microphone Holder M (3998 comments)
Microphone Holder- Size: M- Indestructible plastic clip- Incl. 3/8" thread reducer- For mi...(+) Microphone Holder- Size: M- Indestructible plastic clip- Incl. 3/8" thread reducer- For microphone diameter between 24 - 35 mm- Colour: Black- Made by König & Meyer |
|