| Meris : LVX Modular Delay System
(4 comments)
- Meris LVX - Modular Delay System / Looper, delay effects pedal, modular delay system arc...(+) - Meris LVX - Modular Delay System / Looper, delay effects pedal, modular delay system architecture, 2540 ms of highly configurable dual delay, configurable delay structures, types, and processing elements for the ultimate customization in delay processing, intuitive color screen-based user interface, always available true stereo 60 second looper, 99 preset locations in 33 banks, favorite preset bank for instant access to 3 favorite presets, built-in instant access tuner with configurable reference and output mode, deep modifier section allows routing of control signals to processing parameters, true stereo processing elements with completely new designs and known elements from the Meris family (Polymoon, Hedra, Enzo, and Ottobit Jr.), selectable note divisions for each side of the stereo dual delay, digitally controlled analog mix bus, switchable input / output headroom level for instrument or synthesizer / line levels, assignable expression pedal control for multiple parameters simultaneously, MIDI preset send and receive, MIDI beat clock synchronization, premium analog signal path and analog devices JFET input section, dimmable screen and logo light, 24-bit A/D and D/A conversion, 32-bit floating point DSP, 48,000 Hz sample rate, frequency response from 20 Hz - 20 kHz, selectable true bypass (relay) or analog buffered bypass, controls for Time, Feedback, Mod, Mix, Control 1, Control 2, Control 3 (Save), 4x LED buttons (preset bypass and tap function for desktop user), 4x footswitches (bypass, looper control, tap), metal housing, 2x 6.3 mm mono in / output jacks (true stereo), 6.3 mm expression pedal input, MIDI IN and MIDI THRU connections (5-pin DIN), USB-C port (for firmware updates only), power supply via optional 9V DC adapter, 2.1 mm x 5.5 mm barrel plug, polarity (-) center, current draw 300 mA, battery operation not supported, dimensions (L x W x H) 184 x 114 x 51 mm / 7.25" x 4.5" x 2", weight 680 g / 1.5 lbs, made in the USA |
|
| Meris : Polymoon
(27 comments)
- Delay- 1,200 ms delay time- Tap Tempo function- 6 Custom LFO waveforms- Up to 16 presets...(+) - Delay- 1,200 ms delay time- Tap Tempo function- 6 Custom LFO waveforms- Up to 16 presets via MIDI- 24 bit AD / DA with 32 bit floating point DSP- Selectable bypass (True / Relay Bypass or Buffered)- Selectable delay trails- Switchable headroom for guitar / line level input level- Tempo Syncable Stereo Barberpole Phaser- Dynamic stereo flanger- Expression control of all effect parameters possible (also simultaneous)- MIDI in / out / preset selection / external tap tempo available via EXP jack- Analogue signal path for wet / dry mix- Presets via external 4-Preset switch or MIDI selectable- Controls for Time, Feedback, Mix, Multiply, Dimension and Dynamic- Alt (Hold) button to enable alternative controller functions- Phaser Select button to select the reverb algorithm (Sync Phase & Slow)- Bypass footswitch- Tap footswitch- Status LEDs- Metal housing- 6.3 mm TRS input jack (switchable stereo / mono)- 2 x 6.3 mm mono latches (L / R) outputs- 6.3 mm TRS Exp / Tap Tempo / External Footswitch / MIDI Jack- Power supply via 9 V DC power supply unit with 2.1 x 5.5 mm barrel connector and polarity (-) inside (not included in delivery)- Current consumption: |
|
| Meris : Mercury 7 Reverb Pedal
(27 comments)
- Reverb- Pedal version of the Meris 500 Series Mercury7- 2 Reverb algorithms- Separate co...(+) - Reverb- Pedal version of the Meris 500 Series Mercury7- 2 Reverb algorithms- Separate controls for interaction of high and low frequencies with the reverb algorithm- Up to 16 presets via MIDI- 24 Bit AD/DA with 32 bit floating point DSP- Selectable bypass (True/Relay Bypass or Buffered)- Selectable Reverb Trails- Switchable headroom for guitar/line level input level- Auto Swell Envelope function- Analogue signal path- MIDI in/out/preset selection/external tap tempo available via EXP socket- Analogue wet/dry mix- Presets via external 4-preset switch or MIDI selectable- Space Decay, Modulate, Mix, Lo Frequency, Pitch Vector and Hi Frequency controls- Alt (Hold) button for activating alternative controller functions- Algorithm Select button to select the reverb algorithm (Ultraplate/Cathedra)- Bypass footswitch- Swell footswitch- Status LEDs- Metal housing- 6.3 mm TRS input jack (switchable stereo/mono)- 2x 6.3 mm mono jack (L/R) outputs- 6.3 mm TRS Exp/Tap Tempo/External Footswitch/MIDI jack- Power supply via 9 V DC power adapter with 2.1 mm x 5.5 mm barrel connector, polarity (-) inside (power adapter not included)- Current consumption: 150 mA- Dimensions (L x W x H): 115 x 107 x 67 mm- Weight: 410 g- Made in USA |
|
| Meris : Ottobit Jr. Pedal
(38 comments)
- Bit Crusher / Sample Reduction / Step Sequencer- Pedal version of the Meris 500 series O...(+) - Bit Crusher / Sample Reduction / Step Sequencer- Pedal version of the Meris 500 series Ottobit- 2 Sequencer types: Pitch Seq / Filter Seq- Sample reduction from 48 kHz to 48 Hz- Bit Depth Reduction from 24 to 1 bit- Up to 16 presets via MIDI- 24 Bit AD / DA with 32 bit floating point DSP- Selector Bypass (True / Relay Bypass or Buffered Bypass)- Switchable headroom for guitars / line level input levels- Tap Tempo function- Analog signal path- MIDI In / Out / Preset selection / external Tap Tempo available via EXP jack- Analog wet / dry mix- Presets selectable via external 4-preset switch or MIDI- Controls for sample rate, filter, bits, stutter, sequencer, sequencer mult- Alt (hold) button for activating alternative controller functions- Sequencer Type button to select between Pitch Seq / Filter Seq- Bypass foot switch- Tap foot switch- Status LEDs- Metal housing- 6.3 mm TRS input - stereo / mono switchable- 2x 6.3 mm mono jack (L / R) outputs- 6.3 mm TRS Exp / Tap Tempo / external foot switch / MIDI jack- Power supply with 9 V DC power supply (2.1 mm x 5.5 mm coaxial connection, polarity (-) inside, not included)- Current consumption- Dimensions (L x W x H): 115 x 107 x 67 mm- Weight: 410 g- Made in USA |
|
| Meris : 500 Series 440 Mic Preamp
(2 comments)
- Microphone preamp for recording guitar- Up to 60 dB gain at the input section- -27 dB to...(+) - Microphone preamp for recording guitar- Up to 60 dB gain at the input section- -27 dB to +12 dB Output Trim- Post effect grinding path- Selectable high-pass filter: 80 Hz / 200 Hz- Selectable high-shelf filter: 7000 Hz / 4000 Hz- Frequency response: 20 to 2000 Hz flat (all filters deactivated)- 100% Analog signal path- Controller for gain and output- -20 dB Pad toggle switch for high-level input signals- Phase toggle switch to reverse the signal phase- +48 V toggle switch to enable phantom power- High-shelf toggle switch to select the high-shelf filter frequency- High-pass toggle switch to select the high-pass filter frequency- Status LED for +48 V phantom power- Metal housing- 2 Front-side 6.3 mm mono-pin (send / return) connections- Return socket can be used as DI input (post filters, pad and phase reversal)- For mounting in racks of the 500 series- Made in USANote: Register your product at www.w-distribution.com/Warranty and extend the warranty to 4 years. |
|
| Meris : MIDI I/O MIDI Interface
(11 comments)
- Compact, pedalboard-friendly MIDI I / O for up to 4 MERIS pedals- Allows full control of...(+) - Compact, pedalboard-friendly MIDI I / O for up to 4 MERIS pedals- Allows full control of all parameters via MIDI- Supports MIDI inputs and outputs of all MERIS pedals- Allows unlimited offline preset saving and loading- Wireless compatibility with Bluetooth MIDI adapter- MIDI In and Off activity status LEDs- 9 V DC Power supply (not included - suitable power supply unit: Article number 409939)- Power consumption: 10 mA- Dimensions (W x D x H): 94 x 66 x 38 mm- Weight: 185 g- Includes 1x Flat TRS cable with 30 cm length |
|
| Meris : 500 Series Ottobit
- 500 series Bit Crusher / Sample Reduction / Ring Modulator effects unit- 24 bit AD / DA ...(+) - 500 series Bit Crusher / Sample Reduction / Ring Modulator effects unit- 24 bit AD / DA with 32 bit floating point DSP- Tap Tempo controlled, triggered Envelopes and LFO modifiers- Pitch tracking controlled ring modulator- Glare ring modulation and AM / FM modulation- Sample reduction from 48,000 to 0.1 Hz- Bit depth reduction of 24 to 1 bit- Tap Tempo function- 100% analog bypass- Controls for sample rate, bits, trigger depth, ring mod freq, LFO depth and AM / FM- Alt (Hold) / Tap buttons to activate the alternative control functions and enter Tap Tempo- Pitch Track Switch for linking the ring modulation carrier frequency to the pitch of the output signal- Bypass switch- Status LEDs- Metal housing- For mounting in racks of the 500 series- Made in USA |
|
| Meris : Hedra Pitch-Shifter
(12 comments)
- Pitch shifter- 3 Harmony voices / delay lines with rhythmic time offset- Tap Tempo funct...(+) - Pitch shifter- 3 Harmony voices / delay lines with rhythmic time offset- Tap Tempo function and synchronisation- 12 Diatonic harmonies and chromatic pitch shifting- Up to 16 presets via MIDI- 24 Bit AD / DA with 32 bit floating point DSP- Switchable headroom for guitar/line input level- Tap Tempo functionality with separate temp increases for each voice- Expression control possible for all effect parameters (also simultaneous)- MIDI in / out / preset selection / external tap tempo available via EXP socket- Analogue signal path for wet / dry mix- Presets via external 4-preset switch (Meris Preset Switch, not included) or MIDI selectable- Selectable bypass (True / Relay Bypass or Buffered)- Key, Micro Tune, Mix, Pitch 1, Pitch 2, and Pitch 3 knobs- Alt (Hold) button for activating alternative controller functions- Mode Button for selecting the delay line arrangement (Dual / Dual + Series / Series / Pitch Feedback)- Bypass footswitch- Tap footswitch- Status LEDs- Metal housing- 6.3 mm TRS input jack (switchable stereo / mono)- 2x 6.3 mm mono latches (L / R) outputs- 6.3 mm TRS Exp / Tap Tempo / External Footswitch / MIDI Jack- Power supply via 9 V DC power supply unit with 2.1 x 5.5 mm barrel connector and polarity (-) inside (Power adapter not included)- Current consumption: 150 mA- Dimensions (W x D x H): 107 x 115 x 67 mm- Weight: 410 g- Made in USA |
|
| Meris : Preset Switch
(14 comments)
- Easily save and access up to 4 presets on each Meris pedal- Instantaneous preset switchi...(+) - Easily save and access up to 4 presets on each Meris pedal- Instantaneous preset switching- Connection with a single TRS cable (included)- Control multiple pedals with a simple Y-cable (not included)- Fits exactly 2 Meris pedals- Internal PCB socket for Arduino DIY Midi projects (Arduino microcontroller not included)- No power required- Dimensions (W x D x H): 216 x 57 x 51 mm- Weight: 285 g- Incl. 1 TRS flat cable with 30 cm length |
|
| Meris : Enzo Multi-Voice Synthesizer
(25 comments)
- Synthesizer with polyphonic oscillator architecture- Tracks individual notes as well as ...(+) - Synthesizer with polyphonic oscillator architecture- Tracks individual notes as well as chords or sequenced arpeggiations- Also works with vocals, drum tracks and other instruments- 2 Integrated Tap Tempo Delays- 3 Synth Modes (Poly Synth / Mono Synth / Arpeggiated Synth)- Tuneable portamento time- Custom 6 mode filter- Up to 16 presets via MIDI- 24 Bit AD / DA with 32 bit floating point DSP- Selectable bypass (True / Relay Bypass or Buffered)- Selectable delay trails- Switchable headroom for guitar / line level input level- Expression control of all effect parameters possible (also simultaneous)- MIDI in / out / preset selection / external tap tempo available via EXP socket (for preset selection, automation, beat clock)- Analogue signal path for wet / dry mix- Presets via external 4-Preset switch or MIDI selectable- Pitch, Filter, Mix, Sustain Filter Env and Modulation controls- Alt (Hold) button to enable alternative controller functions- Synth Select button to select the reverb algorithm (Sync Phase & Slow)- Bypass footswitch- Tap footswitch- Status LEDs- Metal housing- 6.3 mm TRS input jack (switchable stereo / mono)- 2x 6.3 mm Mono latches (L / R) outputs- 6.3 mm TRS Exp / Tap Tempo / External Footswitch / MIDI Jack- Power supply via 9 V DC power supply with 2.1 mm x 5.5 mm hollow plug and polarity (-) inside- Current consumption |
|
| Meris : Alt Function Overlay - Enzo
(4 comments)
- Meris Alt function overlay for Meris Enzo effects pedal, shows the alternative control o...(+) - Meris Alt function overlay for Meris Enzo effects pedal, shows the alternative control options and functions for each knob, with low-tack adhesives on corners only, includes optional double sided clear hi-tack/safe tape (on the back of liner) for extra reinforcement, crystal clear with printed inscription, printed and made in Massachusetts, USA, 1 pc. (effects pedal not included in the delivery) |
|
| Meris : Stereo Linking Cable
- For connecting two Meris Mercury7 or Ottobit 500 series modules- Sends all control param...(+) - For connecting two Meris Mercury7 or Ottobit 500 series modules- Sends all control parameters from the left to the right module- Right module remains fully independently controllable for true stereo function- Length: approx. 25 cm |
|
(Change geographical area)
Meris
