| the t.bone : Speech 100 D (7 comments)
Condenser microphone- LCD display- Buttons: Agree, Drop, Disagree, +/-- Built-in loudspeak...(+) Condenser microphone- LCD display- Buttons: Agree, Drop, Disagree, +/-- Built-in loudspeaker with volume control- Headphone jack- 2x LAN (In/Link)- Microphone gooseneck length: Approx. 40 cm- Dimensions (W x H x D): 169 x 46 x 175 mm- Weight: 0.7 kg- Includes a 2 m network cable |
|
| the t.bone : Headphone Adapter (4726 comments)
Plug-in- Adapter for 3.5mm stereo jack to 6.3mm stereo jack |
|
| the t.bone : Micscreen XL
Reduces the transmission of unwanted room effects such as reflections, background noise an...(+) Reduces the transmission of unwanted room effects such as reflections, background noise and echoes via the microphone- Portable and equally suitable for studio, live applications, vocal and instrument acceptance- The 5 segments of the screen can be opened and closed in different positions and can therefore be easily adapted to the shooting situation- Can be mounted on any standard microphone stand or placed directly on a table top without a tripod- Width: 16 - 80 cm (each segment is 16 cm wide)- Height: 32 cm- Weight: Approximately 2.70 kg |
|
| the t.bone : IEM 75 (851 comments)
No license is required and no charges are incurred when used anywhere in Europe- Consistin...(+) No license is required and no charges are incurred when used anywhere in Europe- Consisting of: 9.5" Stereo transmitter IEM 75 ST, bodypack receiver IEM 75 R and t.bone EP3 earphones- Up to 2 systems parallel- Frequency range: 863 - 865 MHz- RF and AF indicator on the transmitter- Mono or stereo operational mode- 2 Jack/XLR combo inputs on the transmitter- Adjustable headphone output- Operates with 2x AA batteries (not included, Article Nr 136681)- Detachable BNC antenna- Including rack-mount and power adapter |
|
| the t.bone : Headphone Case (111 comments)
Two inside pockets for accessories- Wrist strap- Internal dimensions (T x W x H): 180 x 17...(+) Two inside pockets for accessories- Wrist strap- Internal dimensions (T x W x H): 180 x 175 x 95 mm- Outer dimensions (W x W x H): 210 x 190 x 100 mm- Weight: 158 g- AKG K-60 NC- Marshall Major II, Major II BT, Monitor- Sennheiser HD-25, HD26 |
|
| the t.bone : HP 66 (2083 comments)
Dynamic- Supra-aural- Impedance: 32 Ohm- Frequency range: 20 -20,000 Hz- Max. sound pressu...(+) Dynamic- Supra-aural- Impedance: 32 Ohm- Frequency range: 20 -20,000 Hz- Max. sound pressure level: 106 dB- 2 m Cable- Includes adapter from 3.5 mm to 6.3 mm jack |
|
| the t.bone : HD 150 (83 comments)
the t.bone HD 150 Kopfhörer - engerneerd for E-Drums, over ear design, closed-back, 45 mm...(+) the t.bone HD 150 Kopfhörer - engerneerd for E-Drums, over ear design, closed-back, 45 mm drivers, frequency response 10 - 26000 Hz, sensitivity 97 dB, impedance 32 Ohms, max. input power 500 mW, 3 m cable with 3,5 mm plug and 6,3 mm adapter, weight without cable: 225 g |
|
| the t.bone : HD 990D (1990 comments)
Ideal for drummer- Sound attenuation of ambient noise about 22 dBA- Circumaural- Dynamic- ...(+) Ideal for drummer- Sound attenuation of ambient noise about 22 dBA- Circumaural- Dynamic- Impedance: 35 ohms- SPL: 105dB- Frequency response: 10 - 20,000 Hz- 1-4 m Spiral cable- Connector with 3.5mm stereo angled jack- Weight with cable: 358 g- Weight without cable: 258 g- Included: 6.3 mm adapter |
|
| the t.bone : IEM D2.4
Stereo / mono use- Receiver can be synchronized via IR- Integrated limiter- 9.5" Transmitt...(+) Stereo / mono use- Receiver can be synchronized via IR- Integrated limiter- 9.5" Transmitter with integrated monitoring function- Outputs: 6.3 mm and 3.5 mm stereo jack- Jack Inputs: 2x XLR combo- Jack loop outputs: 2x- TNC antenna connection- Adjustable volume- Frequency, channel, group, input level and operating mode display in OLED display- 8 Systems can be operated parallelly- IEM D2.4 R pocket receiver with 3.5 mm headphone output and volume control- Balance control- LED display- Belt clip- Powered by lithium polymer battery- Up to 8 hours of operation- Frequency range: 2400 - 2483 MHz- True diversity- Latency: < 3.7 ms- Frequency response: 5 - 23,000 Hz- Signal-to-noise ratio: >115 dB (A)- Total harmonic distortion: > 0.07 % @ 1 kHz- Dimensions of transmitter without antenna (W x H x D): 209 x 42 x 115 mm- Dimensions of receiver (W x H x D): 63 x 96 x 25 mm- Weight transmitter: 850 g- Weight receiver: 98 g- Incl. power supply 12V DC 1A 12 W (plus inside), lithium polymer battery, rackmount and charging station- Incl. antenna converter- Suitable replacement battery: art. 453988 (not included)- Matching dual rackmount: art. 406584 (not included) |
|
| the t.bone : Headphone Adapter Screw (776 comments)
Screwable- Stereo jack adapter 3.5 to 6.3 mm- M8 thread- AKG K271, K240, K141, K121, K142,...(+) Screwable- Stereo jack adapter 3.5 to 6.3 mm- M8 thread- AKG K271, K240, K141, K121, K142, K171, K272, K242- Shure SRH-440, SRH-840, SRH-940, SRH-240, SRH-550 DJ, SRH-750 DJ- beyerdynamic (versions until summer 2019 with M8 thread) DT-770 pro, DT-770 M, DT-990, DT-880 pro, DT-880 Edition, DT-990 Edition |
|
| the t.bone : Speech 100 M (8 comments)
2 Groups with up to 16 call stations each- Feedback suppression- USB recording and playbac...(+) 2 Groups with up to 16 call stations each- Feedback suppression- USB recording and playback (- Configuration via PC or App- 4 Discussion modes (3, 6, 9 or all microphones can be activated at the same time)- Tuning mode- 2 x Stereo Rec Out (RCA)- 1 x Stereo out for sound system (RCA)- 1 x Stereo in (RCA)- 1 x Mic In (XLR with phantom power)- 1 x LAN- Build: 19" / 2 U- Dimensions (W x H x D): 419 x 692 x 583 mm- Weight: 5.5 kg- Suitable booster for more than 16 microphone units per line: Art.498125 (not included in delivery)- Matching case: Art.496024 (not included in delivery) |
|
| the t.bone : Speech 100 C (6 comments)
Condenser microphone- LCD display- Buttons: Agree, Drop, Disagree, Priority, +/-- Built-in...(+) Condenser microphone- LCD display- Buttons: Agree, Drop, Disagree, Priority, +/-- Built-in loudspeaker with volume control- Headphone jack- Priority control specially for the presidential microphone unit- 2x LAN (In/Link)- Microphone gooseneck length: Approx. 40 cm- Dimensions (W x H x D): 169 x 46 x 175 mm- Weight: 0.7 kg- Includes a 2 m network cable |
|
| the t.bone : SC 300 Micscreen Bundle
the t.bone SC 300 Studio Condenser Microphone-
Characteristic: cardioid-
Frequency respo...(+) the t.bone SC 300 Studio Condenser Microphone-
Characteristic: cardioid-
Frequency response: 40 -18,000 Hz-
Sensitivity: -35 dBV/pa (22.4 mv/pa)-
Impedance: 200 Ohm-
Max. SPL: 122 dB (THD less than 1% 1000 Hz)-
Phantom power: 15-52 V-
Length x max. diameter: 170 x 52 mm-
Weight: 320 g-
Incl. bracket Fun Generation Micscreen Black Mobile Absorber and Diffuser-
Reduces the pick up of unwanted noise such as room reflections and echoes-
Thanks to its design, the Mic screen can be quickly set up and dismantled both in the studio and in live applications-
Fits on almost any standard microphone stand (up to max. diameter 35 mm)-
5/8" Threads for microphone clamps or suspensions-
Dimensions (L x W): 295 x 160 mm-
Consists of 5 pieces-
Colour: Black Fun Generation Mic Stand Microphone Stand with Boom Arm-
5/8" threaded connection-
Boom length: approx. 70 cm-
Height adjustable from 100 to 150 cm-
Weight: 1.6 kg-
Colour: Black the sssnake SM6BK Microphone cable-
XLR 3-pin male - XLR 3-pin female-
Length: 6 m-
Diameter: 6 mm-
Wire cross-section: 2 x 0.22 mm²-
Colour: Black |
|