Ortofon : 2MR Bronze
Ortofon 2MR Bronze; moving magnet cartridge system; developed for optimised mounting on tu...(+) Ortofon 2MR Bronze; moving magnet cartridge system; developed for optimised mounting on turntables with low profile; height only 14 mm; output voltage: 5mV; frequency range: 20-29,000 Hz; scanning capability at 315Hz: 80µm; rec. Contact force: 1.5 g (15 mN); rec. Termination resistance: 47 kOhm; rec. Termination capacitance: 150-300 pF; cantilever material: aluminium; weight: 6 g; dimensions (WxDxH) 18.5 x 24 x 14.5 mm colour: bronze; nude fine line needle finish | |
Ortofon : 2MR Black
Ortofon 2MR Black; moving magnet cartridge system; developed for optimised mounting on tur...(+) Ortofon 2MR Black; moving magnet cartridge system; developed for optimised mounting on turntables with low profile; height only 14 mm; output voltage: 5mV; frequency range: 20-31,000 Hz; scanning capability at 315Hz: 80µm; rec. Contact force: 1.5 g (15 mN); rec. Termination resistance: 47 kOhm; rec. Termination capacity: 150-300 pF; cantilever material: aluminium; weight: 6 g; dimensions (WxDxH) 18.5 x 24 x 14.5 mm colour: black; Nude Shibata needle finish | |
Ortofon : 2MR Black LVB 250
Ortofon 2MR Black LVB 250; moving magnet cartridge system; developed for optimised mountin...(+) Ortofon 2MR Black LVB 250; moving magnet cartridge system; developed for optimised mounting on turntables with low profile; height only 14 mm; output voltage: 5mV; frequency range: 20-20,000Hz; scanning capability at 315Hz: 80µm; rec. Contact force: 1.6 g (16 mN); rec. Termination resistance: 47 kOhm; rec. Termination capacitance: 150-300 pF; cantilever material: boron; weight: 6 g; dimensions (WxDxH) 18.5 x 24 x 14.5 mm colour: black; nude Shibata needle finish | |
MC QUINTET BRONZE
Type : MC ( bobine Mobile )- Diamant : Line Contact - Cantilever : Aluminium- Tension de ...(+) Type : MC ( bobine Mobile )- Diamant : Line Contact - Cantilever : Aluminium- Tension de sortie à 1000 Hz, 5cm/sec. - 0,3 mV- Équilibre des canaux à 1 kHz - < 1,2 dB - Séparation des canaux à 1 kHz - > 23 dB - Séparation des canaux à 15 kHz - > 15 dB - Réponse en fréquence 20-20.000 Hz :- +/-1,5 dB- Capacité de lecture (315 Hz avec la force d'appui recommandée) : 80 m - Compliance, dynamique, latéral : 15 m/mN- Rayon de la pointe du stylus : r/R 8/40 m- Plage de force d'appui : 2,1-2,5 g (21-25 mN)- Force d'appui recommandée : 2,3 g (23 mN)- Angle de lecture : 20°- Impédance interne, résistance CC : 5 Ohm - Impédance de charge recommandée : > 20 Ohm- Matériau du corps de la cellule : ABS/Aluminium- Matériau du fil de la bobine : Cuivre pur 4-neuf - Couleur de la cellule : Bronze- Poids de la cellule : 9 grammes | |
MC QUINTET BLACK S
Type : MC ( bobine Mobile )- Diamant : Pointe Nue / Line Contact Shibata- Cantilever : Sap...(+) Type : MC ( bobine Mobile )- Diamant : Pointe Nue / Line Contact Shibata- Cantilever : Saphir- Tension de sortie à 1000 Hz, 5cm/sec. - 0,3 mV- Équilibre des canaux à 1 kHz : < 1,0 dB - Séparation des canaux à 1 kHz - > 23 dB - Séparation des canaux à 15 kHz- > 15 dB - Réponse en fréquence 20-20.000 Hz - +/- 1,5 dB- Capacité de lecture (315 Hz avec la force d'appui recommandée) : 80 m - Souplesse, dynamique, latérale - 15 m/mN- Rayon de la pointe du stylus - r/R 6/50 m- Plage de force d'appui - 2,1-2,5 g (21-25 mN)- Force d'appui recommandée - 2,3 g (23 mN)- Angle de lecture - 20°- Impédance interne : 5 Ohm - Impédance de charge recommandée : > 20 Ohm- Matériau du corps de la cellule : ABS/Aluminium- Matériau du fil de la bobine : Aucurum- Couleur de la cellule : Noir- Poids de la cellule : 9 g | |
Elektron Octatrack Mkii Black
La découverte de l'échantillon parfait est le début du processus. Ensuite, expérimente...(+) La découverte de l'échantillon parfait est le début du processus. Ensuite, expérimentez et reconstruisez-le en quelque chose d'unique. L'Octatrack MKII établit de nouvelles normes pour l'échantillonnage en tant que forme d'art. Qu'apporte la version MKII Octatrack MKII est amélioré, amélioré et modifié. Une meilleure version d'elle-même, conçue pour manipuler des échantillons dans des environnements exigeants. Assuré par: des boutons de haute qualité et des encodeurs haute résolution, un écran OLED net aux angles de vision fantastiques, un crossfader professionnel sans contact et un nombre accru de boutons dédiés.- Écran OLED croustillant offrant une rétroaction optimale dans les environnements faiblement éclairés- Boutons rétro-éclairés ultra durables. Évalué pour 50 millions de presses- Crossfader de performance lisse et soyeux sans contact- Encodeurs précis et haute résolution- Augmentation du nombre de boutons dédiés permettant un flux de travail plus rapide- Entrées audio équilibrées avec beaucoup de marge Matériel qui change la donne L'Octatrack MKII apporte une capacité de traitement des échantillons énorme dans une machine conçue pour les performances en direct. Il redéfinit la façon dont vous transformez vos sons, ainsi que la manière dont vous interagissez et jouez avec eux. Il vous permet de faire des choses qui étaient auparavant impossibles avec un seul instrument.Enregistrez des échantillons en temps réel. Ajoutez des étirements et des décalages en temps réel. Utilisez le séquenceur pour contrôler les sons internes et les équipements MIDI externes. L'Octatrack MKII peut également être traité comme une petite table de mixage pour toute votre installation. Le contrôle immédiat fait toute la différence.Le crossfader ajoute une profondeur immense à votre son. Tout d'abord, choisissez comment vous voulez que vos échantillons soient affectés. Ensuite, déplacez doucement le crossfader pour obtenir les changements les plus subtils et les plus naturels, ou faites-le défiler comme vous le feriez pour des améliorations rapides et extrêmes. La légende continue Au cours de ses sept années d'existence, l'Octatrack d'origine est rapidement devenu l'un des échantillonneurs de performances en direct les plus largement utilisés. Une norme de l'industrie s'il en est une. Cela a sans aucun doute changé la configuration des équipements et a donné aux artistes le pouvoir de jouer en direct dans le vrai sens du terme. L'Octatrack MKII est maintenant là. Plus net, meilleur, plus robuste. Il porte fièrement l héritage de son prédécesseur, confirmant ainsi sa position d instrument de prédilection de l artiste créateur. Caractéristiques : - 8 pistes audio stéréo- 8 pistes MIDI dédiées- Echantillonnage stéréo immédiat- Fonctions Time Stretch et Pitch en temps réel- 2 inserts FX par piste audio- 3 LFOs par piste- Séquenceur Elektron adapté à la scène- Crossfader sans contact- Sortie casque sur Jack 6,3 mm- 2 sorties principales symétriques sur Jack 6,3 mm- 2 sorties Cue symétriques sur Jack 6,3 mm- 4 entrées symétriques sur Jack 6,3 mm- Port USB 2.0 haute vitesse- MIDI In/Out/Thru- Ecran OLED 128 x 64 pixels- Encodeur Hi-Res précis- Boutons rétro-éclairés- Entièrement compatible avec les projets et fichiers du Octatrack MKI- Dimensions: 340 x 185 x 63 mm- Poids: 2,3 kg | |
RMX-95
Mixer 4 Entrées Reloop RMX-95Table de mixage 4 pistes DJ Club haute performance, avec un ...(+) Mixer 4 Entrées Reloop RMX-95Table de mixage 4 pistes DJ Club haute performance, avec un son de qualité supérieure. Interface audio USB 24 bits double 10 entrées/sorties et hub USB Beat FX et filtres sonores avec contrôle de la fréquence et de la résonance.Manipulation chirurgicale du sonEcho, Reverb, Flanger, Phaser, Vinyl Brake, Loop Roll, Noise, Pitch Shift, Delay, Ping Pong Delay, Tape Delay, Bit Crusher et Transformer ne sont que quelques-uns des nombreux effets de qualité studio inclus dans la toute nouvelle unité Beat FX. La commande de fréquence FX dédiée (LPF/HPF) vous permet d'appliquer les effets à une plage de fréquence spécifique pour un son unique.Des connexions à profusionLe RMX-95 excelle également en termes de connectivité : Quatre entrées CD, deux entrées ligne et deux entrées phono sont disponibles sur les quatre canaux d'entrée. Le canal micro séparé dispose de deux connexions micro (1 x jack, 1 x jack/XLR combiné) et d'une entrée AUX supplémentaire. La sortie maître offre des connexions par câble RCA ou XLR symétrique. La sortie de la cabine dispose de deux connexions jack pour un fonctionnement stéréo. Cependant, elle peut également être utilisée en mode mono. Un appareil d'enregistrement peut être connecté à la sortie Rec via des prises RCA pour enregistrer les sets des DJ - quel que soit le niveau de la sortie maître. Enfin, la table de mixage DJ dispose de deux prises pour casque.Une flexibilité maximale : interface audio double-USBLes dix entrées et sorties de la double interface USB 2.0 de haute qualité offrent une qualité sonore supérieure en 24 bits. Les deux ports USB permettent des transitions fluides entre les DJ et une flexibilité maximale lors de l'utilisation de différentes configurations au cours d'une même soirée dans un club. En outre, le hub USB actif permet de connecter des périphériques USB supplémentaires.Une architecture entièrement numériqueL'architecture numérique de la RMX-95 transforme la table de mixage DJ en un contrôleur MIDI mappable individuellement. Dans ce cadre, le menu de configuration offre une multitude d'options personnalisables, telles que la plage de fréquence de l'égaliseur, le mode d'égalisation Neural Mix , le routage de l'interface audio et le routage de zone pour la sortie de la cabine.Compatible DVS pour djay PRO AI et Neural Mix Le RMX-95 fonctionne avec le djay PRO AI d'Algoriddim par le biais du plug and play. La fonction révolutionnaire Neural Mix de l'application DJ vous permet d'isoler les rythmes, les mélodies et les voix dans le mix en temps réel. La RMX-95 prend en charge l'intégration DVS avancée de djay PRO AI avec Mac, PC, iPhone et iPad. Le logiciel DJ est également compatible avec les services de streaming comme Tidal¹, Soundcloud¹, Beatport Link¹ ou Beatsource Link¹.Coupes nettes et des mélanges fluidesLa courbe réglable de tous les faders offre aux DJ la flexibilité créative qu'ils souhaitent lors du mixage. Les platinistes et les amateurs de scratch peuvent également améliorer le crossfader avec le RMX innoFADER sans contact.Un design indestructibleL'élégante surface métallique noire de la table de mixage n'est pas seulement attrayante, elle est aussi très résistante. Le boîtier métallique solide et les arbres métalliques résistants de tous les potentiomètres et interrupteurs intégrés assurent une longue durée de vie, même en cas d'utilisation intensive du club.Une architecture entièrement numériqueL'architecture numérique de la RMX-95 transforme la table de mixage DJ en un contrôleur MIDI mappable individuellement. Dans ce cadre, le menu de configuration offre une multitude d'options personnalisables, telles que la plage de fréquence de l'égaliseur, le mode d'égalisation Neural Mix , le routage de l'interface audio et le routage de zone pour la sortie de la cabine.Compatible DVS pour djay PRO AI et Neural Mix Le RMX-95 fonctionne avec le djay PRO AI d'Algoriddim par le biais du plug and play. La fonction révolutionnaire Neural Mix de l'application DJ vous permet d'isoler les rythmes, les mélodies et les voix dans le mix en temps réel. La RMX-95 prend en charge l'intégration DVS avancée de djay PRO AI avec Mac, PC, iPhone et iPad. Le logiciel DJ est également compatible avec les services de streaming comme Tidal¹, Soundcloud¹, Beatport Link¹ ou Beatsource Link¹.Coupes nettes et des mélanges fluidesLa courbe réglable de tous les faders offre aux DJ la flexibilité créative qu'ils souhaitent lors du mixage. Les adeptes de platines et les amateurs de scratch peuvent également améliorer le crossfader avec le RMX innoFADER sans contact.Un design indestructibleL'élégante surface métallique noire de la table de mixage n'est pas seulement attrayante, elle est aussi très résistante. Le boîtier métallique solide et les arbres métalliques résistants de tous les potentiomètres et interrupteurs intégrés assurent une longue durée de vie, même en cas d'utilisation intensive du club.Caractéristiques principales Table de mixage DJ club professionnelle à 4+1 canauxInterface audio DUAL 10 In/Out USB 2.0 avec une superbe qualité de son 24 bitsNouvelle unité Beat FX avec de multiples effets en qualité studio : Echo, Reverb, Flanger, Phaser, Vinyl Brake, Loop Roll, Noise, Pitch Shift, Delay, Ping Pong Delay, Tape Delay, Bit Crusher,TransformerContrôle de la fréquence de l'effet (LPF/HPF) pour manipuler les effets dans la bande de fréquence sélectionnée.Filtres sonores : Unité de filtrage bipolaire avec LPF et HPFContrôle de la résonance en temps réel pour les filtres de canalHub USB actif pour connecter des accessoires USBEQ 3 bandes à comportement réglable (classic/kill)Deux écrans numériques affichant des informations en temps réel sur les modifications des paramètresArchitecture de mixeur numérique avec de nombreuses options de réglageMenu de configuration étendu, comprenant :Plage de fréquences de l'égaliseur (basse, haute)Mode d'égalisation Neural Mix Routage de l'interface audioRoutage de la zone de sortie de la cabine (matrice)Option Cue soloCompatible RMX innoFADERCourbes de linefader et de crossfader réglablesÉléments de contrôle compatibles avec la norme MIDI2x port USB 2.0 à haute rétention, particulièrement durable2x sorties casque via jack stéréo 6.3/3.5 mm avec split cue2x entrées micro avec bouton MIC ON dédiéSortie cabine en stéréo ou monoFinition métallique noire pure de haute qualité et résistanteConstruction robuste dans un boîtier métallique avec des axes métalliques boulonnésVerrouillage Kensington pour sécuriser l'appareilManuel, cordon d'alimentation et câble USB inclus.Caractéristiques techniques Gamme de fréquences : 20 Hz - 20 kHz +2/-3dBEntrées : 7x ligne RCA, 2x phono RCA, 1x micro combo-XLR/jack, 1x micro jack 6.3mm (TR), 2x port USBSorties : XLR maître (symétrique), RCA maître (asymétrique), cabine (TRS) (symétrique), RCA rec (asymétrique), 1x jack 6,3 mm pour casque, 1x jack 3,5 mm pour casqueGamme d'égalisation classique à 70 Hz, 1 kHz, 13 kHz : -26 dB/+9 dBGamme d'égalisation isolateur à 70 Hz, 1 kHz, 13 kHz : -90 dB (destruction totale)/+9 dBGamme d'égalisation micro à 100 Hz, 10 kHz : -12 dB/+ 12dBEQ casque à 100 Hz, 10 kHz : -29dBSource d'alimentation : AC100-240V, 50/60HzConsommation électrique : 29 WDimensions : 322(L) x 387(P) x 107,5(H) mmPoids : 6,8 kg | |
Behringer Pro Mixer Dx2000 Usb Dx2000usb Dx 2000 (1 comments)
PRO MIXER DX2000USBConsole DJ professionnelle 7 canaux avec interface audio USB, contrôle...(+) PRO MIXER DX2000USBConsole DJ professionnelle 7 canaux avec interface audio USB, contrôle par VCA et ensemble complet de logicielsDescription* Console DJ professionnelle 7 canaux à niveau de bruit ultra faible avec préamplis phono de dernière génération* 5 entrées doubles stéréo plus 2 canaux micro/ligne mono avec préamplis micro ULN, alimentation fantôme, réglage de gain et LED Clip* Interface USB intégrée pour l'enregistrement et la lecture de tout fichier audionumérique. Fonctionnement sur ordinateur PC ou Mac sans installation ni pilotes* Égaliseur Kill 3 bandes (-32 dB) ultra musical avec touche On/Off dans chaque canal stéréo* Séquenceur audio/MIDI révolutionnaire energyXT2.5 Compact à chargement presque instantané avec tous les systèmes d'exploitation* Ensemble complet de logiciels comprenant le logiciel d'enregistrement et de restauration de vinyle Audacity, ainsi que les outils de podcasting Podifier et Golden Ear* Crossfader à VCA échangeable et assignable librement pour une fiabilité et un son irréprochables* Sortie casque avec réglages de niveau et de balance PFL/Main, mode Split débrayable et afficheur de niveau* Fonction talkover automatique avec réglages Sensitivity, Time et Damping séparés* Fonctions Main Mute, Main Boost, Punch et Cut pour des possibilités de mixage exceptionnelles* Sortie pour subwoofer plus sortie Zone pour la diffusion dans un second lieu* Alimentation « Planet Earth » pour une polyvalence maximale (100 - 240 V~), un son dénué de bruit résiduel, une excellente réponse transitoire et une consommation d'énergie réduite* Équerres de montage en rack fournies pour une flexibilité ultime* Composants de haute qualité et fabrication exceptionnellement robuste pour des années de fiabilité* Conçu et développé par BEHRINGER Allemagne* 45-mm infinium® contact-free optical crossfader with adjustable friction and fader curve for years of use | |
Behringer : X1 (9 comments)
Technologie sans contact optique- Très longue durée de vie, positionnement numérique (...(+) Technologie sans contact optique- Très longue durée de vie, positionnement numérique (128 positions)- Véritables sensations analogiques- Friction magnétique ajustable- Utilisation avec DDM400 | |
2M BLACK LVB 250 PREMOUNTED
Type : MM (Aimant mobile)- Diamant : Pointe nue / Line Contact Shibata- Tension de sortie ...(+) Type : MM (Aimant mobile)- Diamant : Pointe nue / Line Contact Shibata- Tension de sortie à 1000 Hz, 5 cm/sec : 5 mV- Équilibre des canaux à 1 kHz : < 1 dB- Séparation des canaux à 1 kHz : > 27 dB- Séparation des canaux à 15 kHz : 15 dB- Réponse en fréquence : 20-20 000 Hz (+2 / - 1 dB)- Capacité de lecture (315 Hz avec la force d'appui recommandée) : 80 m- Compliance, dynamique, latérale : 22 m/mN- Rayon de la pointe du stylus : r/R 6/50 m- Cantilever : Bore- Plage de force d'appui : 1,5-1,7 g (15-17 mN)- Force d'appui recommandée : 1,6 g (16 mN)- Angle de lecture : 20°- Impédance interne : 1,2 ohms- Inductance interne : 630 mH- Résistance de charge recommandée : 47 kOhm- Capacité de charge recommandée : 150-300 pF- Couleur de la cellule et du stylus : Noir/Noir- Poids de la cellule 2MR : 6 g- Poids des cellules Verso 2M et 2M : 7,2 g- Poids de la cellule prémontée 2M : 16,7 g- Diamant de rechange : 2M Noir LVB 250- Stylus interchangeables : 2M Noir et 2M Bronze- Durée de vie du diamant : Avec des soins appropriés, il est possible d'atteindre jusqu'à 1000 heures sans dégradation des performances. - Accessoire : Livrée montée sur un porte cellule SH-4 | |
OMNITRONIC TRM-402MK3 - MIXEUR ROTATIF 4 VOIES
Table de mixage Rotary 4 canaux, isolateur de fréquences 3 voies pour DJ Omnitronic TRM-4...(+) Table de mixage Rotary 4 canaux, isolateur de fréquences 3 voies pour DJ Omnitronic TRM-402 MK3Depuis quelque temps, les mixeurs rotatifs font un retour en force dans le monde de la musique électronique. Le TRM-402 MK3 d'Omnitronic offre au DJ toutes les caractéristiques classiques d'un mixeur rotatif avec ses boutons ALPS (Blue Velvet RK27) et l'isolateur de fréquence 3 bandes intégré qui garantissent une longue durée de vie et des caractéristiques sonores exceptionnelles.Transitions fluidesLes composants de haute qualité offrent un son de qualité et attrayant. Les gros boutons des deux canaux permettent des transitions très douces, difficiles à régler avec une table de mixage classique (avec faders). Pour les deux canaux, vous pouvez commuter entre 2 entrées ou sources ligne et phono. Une entrée micro est également disponible. Les caractéristiques d'abattage de l'isolateur éliminent complètement les basses, les moyennes et les aigus pour un mixage créatif.Transitions doucesLes composants de haute qualité offrent un son de qualité et attrayant. Les gros boutons des deux canaux permettent des transitions très douces, difficiles à régler avec une table de mixage classique (avec faders). Pour les deux canaux, vous pouvez commuter entre 2 entrées ou sources ligne et phono. Une entrée micro est également disponible. Les caractéristiques d'abattage de l'isolateur éliminent complètement les basses, les médiums et les aigus pour un mixage créatif.Enregistrer votre propre setGrâce à la sortie cabine et à un contrôle de volume séparé, l'utilisation du TRM-402 MK3 en club ne pose aucun problème. Grâce à la sortie disque, il est également possible d'enregistrer son propre set DJ.CARACTÉRISTIQUES : - Mélangeur rotatif classique avec 4 canaux d'entrée et isolateur de fréquence 3 bandes intégré pour les DJs- Contrôle du gain, égaliseur 2 bandes (aigus / graves) et commutation phono / ligne par canal- Fonction boost et kill efficace- Les caractéristiques Kill permettent d'éliminer complètement les basses, les médiums et les aigus pour un mixage créatif- Potentiomètre rotatif ALPS classique (Blue Velvet RK27)- Composants de haute qualité garantissant une longue durée de vie et d'excellentes propriétés sonores- Entrée micro DJ avec réglage de volume séparé- Pré-écoute des canaux d'entrée et du master sum via une sortie casque réglable- Avec fonction cue mix / split- Affichage de niveau LED stéréo à 12 chiffres et contrôle du master- Sortie booth avec contrôle de volume séparéCARACTÉRISTIQUES TECHNIQUES : Alimentation électrique : 100-240 V CA, 50/60 Hz Puissance totale de raccordement : 20 W Classe de protection : SK I Branchement électrique : Alimentation électrique Appareils froids (M) version encastrable Câble d'alimentation à prise contact de protection (inclus dans la livraison) Plage de fréquence : - Microphone 20 - 20000 Hz - Line 20 - 20000 Hz - Phono 40 - 18000 Hz Rapport signal/bruit : - >77 dB Phono - >80 dB Microphone - >85 dB Line Distorsion harmonique : - Line | |
TD 1600 NOIR INCLUS TAS 1600
Général - Platine manuelle avec sous châssis suspendu- Entraînement par courroie- Pla...(+) Général - Platine manuelle avec sous châssis suspendu- Entraînement par courroie- Plateau en aluminium moulé sous pression - Dimensions et poids du plateau : 30,5 cm (12) / 4,2 kg- Vitesse : 33 tours 1/3, 45 tours- Courroie ajustable- Moteur AC synchrone à commande électronique- Commutation de la vitesse : manuel (commutateur en façade)- Couleur : NoirBras de lecture - Type de bras : Thorens TP 92- Longueur du bras : 232,8 mm- Porte à faux : 17,8 mm- Angle de coude : 23,6°- Masse effective (11 g)- Anti patinage (anti skating) magnétiqueCellule TAS 1600 - Cellule à bobine mobile- Diamant Line Contact nu- Format de montage 1/2- Réponse en fréquence : 20 - 50,000 Hz- Bobine PCOCC (cuivre Ohno Continuous Cast)- Corps en aluminium- Broches de connexion en laiton- Séparation des canaux : 28 dB (1 kHz)- Balance des canaux de sortie : 0,5 dB (1 kHz)- Tension de sortie : 0,4 mV (1 kHz, 5 cm/sec)- Angle de suivi vertical : 20 degrés- Force d'appui recommandée : 1,8 à 2,2 g (standard 2,0 g)- Taille du diamant : 1,5 x 0,28 mil- Cantilever de 0,28 mm en bore- Impédance de la bobine : 12 Ohms (1 kHz)- Inductance de la bobine : 25 H (1 kHz)- Résistance CC : 12 Ohms- Conformité statique : 22 x 10 - 6 cm / dyne- Conformité dynamique : 18 x 10 - 6 cm / dyne (100 Hz)- Impédance de charge recommandée : min 100 Ohms- Poids de la cellule : 8,2 gConnectiques - 1 RCA stéréo- Sortie XLR symétrique- 1 prise terre (masse)- Accessoires fournis- 1 câble d'alimentation- 1 tapis en caoutchouc- 1 transformateur secteur- 1 capot de protection en acryliqueDonnées logistiques- Dimensions (LxHxP) : 454 x 180 x 369 mm- Poids : 10.9 kg | |
© 2000 - 2024
Home - New realises - Composers
Legal notice - Full version