EQUIPMENT › DEPARTMENT MICROPHONE
16 items found(Change geographical area)
 | Focusrite Isa One Classic Single-channel Microphone Preamplifier With Independent Di Fopc
Le préamplificateur ISA One offre le son prestigieux Focusrite ISA à transformateur dans...(+) Le préamplificateur ISA One offre le son prestigieux Focusrite ISA à transformateur dans un châssis robuste et portable, pour un prix révolutionnaire.L'ISA One dispose du design classique du module original ISA110, qui a constitué la pierre angulaire de chaque canal de la console légendaire Focusrite Forté.Le préampli est complété par une entrée ligne et un canal dédié indépendant DI, avec son propre contrôle de gain, un sélecteur d'impédance, une sortie Jack TRS pour le routage vers un ampli et une sortie XLR indépendante à l'arrière. Un circuit à impédance variable a été ajoutée, permettant à l'utilisateur de basculer entre quatre réglages d'impédance d'entrée soigneusement sélectionnés. En plus de l'impédance de l'ISA110, trois autres paramètres permettent d'adapter ou non l'impédance d'entrée du préampli avec n'importe quel microphone. L'ISA One dispose également d'un point d'insertion afin de placer un traitement supplémentaire entre le préampli ou DI et le convertisseur optionnel. On trouve également sur la face avant inclinée un 48V, un inverseur de phase et un filtre passe-haut à 75Hz (18dB/octave).Un double 'metering' permet aux vumètres d'entrée, l'un à aiguille dans la pure veine ISA avec possibilité d'étalonnage en fonction du support d'enregistrement analogique et numérique, l'autre sous forme de 2 'bargraphs' à 6 LED, d'avoir un contrôle précis des 2 canaux. A noter que les signaux d'entrée peuvent être contrôlés post ou pré insert. Les étalonnages des vumètres peuvent se caler sur les niveaux de référence des systèmes Pro Tools HD.L'ISA One dispose aussi d'une sortie casque avec volume dédié, pouvant être alimentée par une source externe 'Cue Mix' (une piste clic ou un mixage stéréo envoyé d'une interface ou d'une sortie'direct' de console) qui alimente le casque via deux entrées jack TRS à l'arrière.Un convertisseur AD stéréo optionnel est également disponible (la même carte que celle utilisée avec l'ISA430 MkII). Référence 138563Caractéristiques- Entrées ligne XLR et jack 6,35 mm- Entrée micro XLR (avec transformateur Lundahl LL1538)- Potentiomètre de contrôle de gain à paliers (10 dB), potentiomètre de compensation (0/+20 dB) et inter. 0/30 dB, 30/60 dB- Alim. 48 V, inverseur de phase et filtre passe-haut- Sélecteur d’impédance (low, ISA 110, med, high) et sélecteur de source mic/ligne/ inst- Vumètre à aiguille rétroéclairé à calibration variable et vumètre à Led 6 segments (pré ou post insert)- Entrée Cue mix stéréo 2 x jack 6,35 mm- Insert d’effets 2 x jack 6,35 mm- Sortie casque jack 6,35 mm- Sorties DI XLR et jack 6,35 mm, et sortie Main XLR - Interface numérique optionnelle- Poids et dimensions : 3,9 kg - 290 x 290 x 104 mm  |
 | |
 | FOCUSRITE CLARETT+ OCTOPRE
FOCUSRITE CLARETT OCTOPRE+Profitez du son classique de Focusrite, avec le mode Air tout an...(+) FOCUSRITE CLARETT OCTOPRE+Profitez du son classique de Focusrite, avec le mode Air tout analogiqueRetournez aux sources de Focusrite grâce au circuit analogique à relais haut de gamme équipant chaque préampli. Il émule le classique ISA 110, celui qu\'on trouvait sur la Console de studio originale de Focusrite. Lorsque le mode Air est activé, l\'impédance passe à 2,2 k et deux high shelves cumulatifs boostent les hautes fréquences de 4 dB au total. Capturez la version la plus pure de votre son avec le préampli micro Clarett+Obtenez des enregistrements d\'une parfaite netteté, séance après séance.Avec une plage dynamique de 118 dB et un niveau de bruit équivalent (EIN) de 129 dBu, l\'intégrité des signaux sources est préservée. Le trajet de signal entièrement symétrique garantit des signaux entrants parfaitement nets, avec un niveau de bruit minime vous profitez ainsi du son de studio professionnel de Focusrite à chaque séance d\'enregistrement. Des inserts sur chaque canalLes huit inserts dédiés présents sur le Clarett+ OctoPre vous permettent d\'enregistrer au travers de vos processeurs externes préférés et d\'en capturer tout le caractère.Ajoutez aisément des équipements analogiques au trajet du signal grâce à notre design d\'inserts flexible.Un multitracking précis grâce aux convertisseurs A/N optimisés Enregistrez plusieurs sources simultanément en toute confiance et gérez n\'importe quelle séance d\'enregistrement, quelle que soit son ampleur. Grâce à ses niveaux de bruit et de distorsion ultra-faibles, le convertisseur A/N du Clarett+ OctoPre, combiné aux puissants préamplis, vous permettra d\'effectuer des prises de qualité professionnelles, prêtes à être mixées.Préservez votre style grâce aux convertisseurs N/A améliorésL\'exceptionnel convertisseur N/A qui équipe le Clarett+ OctoPre permet aux ingénieurs(es) du son de traiter facilement les prises en y apportant leur touche de style. Ils et elles seront sûrs que la qualité sonore sera préservée quand ils et elles enverront l\'audio dans des compresseurs, égaliseurs et effets analogiques. Branchez le Clarett+ OctoPre à une Clarett+ 8Pre via ADAT et envoyez 16 canaux à une console de mixage. La meilleure qualité sonore en ADAT Ajoutez le Clarett+ OctoPre à une 2Pre, 4Pre ou 8Pre via ADAT et profitez d\'un plus grand nombre d\'E/S en toute simplicité. Ceux et celles qui n\'utilisent pas de Clarett+ peuvent faire évoluer leur configuration et profiter du son classique professionnel de Focusrite en branchant le préampli à une interface compatible avec l\'ADAT. Ils et elles bénéficieront ainsi de la qualité supérieure offerte par le Clarett+ OctoPre.Préservez le son naturel de votre guitareCapturez toutes les nuances sonores de votre guitare grâce aux entrées instruments à JFET du Clarett+ OctoPre. La généreuse largeur de bande de ces entrées préserve la pureté des hautes fréquences. Vous aurez l\'impression de brancher votre guitare directement à un ampli. Bundle logicielsObtenez des résultats de qualité professionnelle grâce au bundle Hitmaker Expansion. Il inclut des plug-ins de mixage et des instruments virtuels. Focusrite Plug-in Collective Enregistrez votre matériel pour recevoir régulièrement des réductions et des versions exclusives des logiciels les plus innovants.Extension HitmakerBrainworx® bx_console Focusrite SCLes préamplis qui ont fait de Focusrite une marque incontournable pour votre musique. Aucun autre plug-in ne reproduit le caractère exceptionnel de notre console grand format mythique, avec ses préamplis ISA 110 l\'origine du célèbre mode \'Air\' que l\'on trouve encore aujourd\'hui sur les interfaces de Focusrite. Le plug-in bx_console Focusrite SC est une tranche de console complète qui réunit un égaliseur, un dé-esseur, un compresseur, un limiteur, un gate et un extenseur.Brainworx® bx_masterdeskLe système de mastering analogique haut de gamme qui apporte la touche finale à vos morceaux. Alliant l\'art du mastering à un environnement de travail intuitif, il permet aussi bien aux réalisateurs(trices) artistiques en herbe qu\'aux professionnels(les) chevronnés d\'obtenir rapidement et aisément des résultats dignes des plus grands studios.Brainworx® bx_oberhausenLa reproduction virtuelle à l\'identique d\'un synthé polyphonique américain classique. Le plug-in bx_oberhausen modélise chaque composant de cette icône analogique. Et avec ses 32 voix, cette version logicielle fournit le double de ce qu\'offrent les plus importants synthés entièrement analogiques du marché actuel à vous les magnifiques accords et les énormes unissons !Suite de plug-ins Focusrite Red 2 & 3Ce duo modélise les égaliseur et compresseur mythiques qui ont fait la légende de Focusrite. Si vous avez écouté des albums majeurs ces 30 dernières années, vous connaissez les Red 2 et 3.Antares® Auto-Tune® AccessDe la correction tonale en temps quasi-réel pour des prises vocales naturelles impeccables, jusqu\'au pitch-shifter ultra-rapide de style hip-hop pour réinventer vos morceaux, il sait tout faire.Relab LX480 EssentialsProfitez de quatre réverbes modélisées à partir des processeurs matériels présents dans le Hit Factory NYC. Retrouvez avec LX480 Essentials le son d\'un studio qui a accueilli Springsteen, les Stones, Kool and the Gang, The Weeknd, Pharell, Katy Perry, etc.Softube® Marshall® Silver Jubilee 2555L\'évolution moderne du mythique JCM800 développée par les experts de la modélisation d\'équipements analogiques, Softube®. Le Silver Jubilee produit aussi bien un son clair chaleureux qu\'un crunch classique et le son à lampes moderne à haut niveau de gain.XLN Audio® Addictive KeysFaites résonner un magnifique son de piano dans vos compositions grâce à l\'une des quatre modélisations professionnelles des instruments de Steinway®, Yamaha® et du classique Rhodes®. Branchez votre clavier MIDI et commencez à jouer. Vous serez immédiatement transporté(e) dans un studio d\'enregistrement professionnel configuré pour capturer le son de l\'un de ces splendides pianos sans sortir de votre studio.XLN Audio® Addictive Drums 2: Studio RockProfitez du son d\'un batteur professionnel en toute simplicité, grâce aux samples de batteries Tama et Pearl et de cymbales Paiste et Sabian enregistrées aux Decibel Studios à Stockholm.Focusrite Plug-in CollectiveRecevez plusieurs fois par an un nouveau plug-in et des offres exclusives d\'un nouveau partenaire.CaractéristiquesFocusrite Clarett+ OctoPrePréampli micro 8 canaux/convertisseur ligne AD/DA avec 2 entrées instrument JFETConversion A/N et N/A 24 bits avec une fréquence d\'échantillonnage jusqu\'à 192 kHzCircuitAirentièrement analogique contrôlé par relais dans chaquePréampli, pour émuler le Focusrite ISA 110 classiquePlage dynamique de 118 dB et 129 dBu ONChemin de signal entièrement équilibré8x inserts de canal dédiésAlimentation fantôme +48 V (commutable dans les groupes 1-4 et 5-8)Indicateur de niveau à LED à 8 segments et LED de clip de canal2 entrées combo micro/instrument XLR/jack 6,3 mm6 entrées combo micro/ligne XLR/jack 6,3 mm8x insert jack 6,3 mm1x sortie ligne sub-D25 (8 canaux)Entrée et sortie word clock BNC2x entrée et sortie ADATHitmaker Expansion Software Bundle (Ableton Live Lite, 3 mois d\'abonnement à Splice Sounds et Plugin Bundle pour l\'écriture, le mixage et le mastering)Plugins d\'extension Hitmaker : Softube Marshall Silver Jubilee 2555, XLN Audio, Addictive Keys, XLN Audio Addictive Drums 2, Brainworx bx_oberhausen, Accès Antares Auto-Tune, Brainworx Bx_console Focusrite SC, Focusrite Red 2 & 3, Plug-in Suite, LX480 Essentials de Relab, Brainworx bx_masterdeskFormat : 19/ 1 UDimensions : 482 x 286 x 44,5 mmPoids : 4,15 kg |
| |
 | Fire & Stone : VC-1 Cello Pickup (9 comments)
Piezo pickup for insertion into the bridge- 6.3 mm jack- Attachment to the tailpiece with ...(+) Piezo pickup for insertion into the bridge- 6.3 mm jack- Attachment to the tailpiece with Velcro- Simple installation, no modification work on the instrument needed- Includes wooden shims for adapting to the bridge  |
| |
 | Bottle Mic Locker - Flagship Tube Microphone and Capsule Collection
Custom Raspberry Beret. Blue Microphones. General Merchandise. Published by Blue Microphon...(+) Custom Raspberry Beret. Blue Microphones. General Merchandise. Published by Blue Microphones (HL.323293).
Item Number: HL.323293
10x24 inches.
The Custom Shop Bottle Mic Locker Limited Edition represents the pinnacle of microphone craftsmanship. Blue's Custom Shop offers a rare opportunity to own a limited edition Bottle. Designed to be the visual and sonic cornerstone of your studio, Custom Shop Bottles feature a variety of special finishes, from metallic, glossy hot rod colors to textured, hammer-tone and matte options. Choose from 6 new limited edition custom shop colors.
For recordists and studios that wish to take advantage of the creative power of the Bottle's interchangeable capsules, The Bottle Mic Locker Limited Edition system includes the Custom Shop Bottle of your choice, plus the B0, B6, B7, and B8 Bottle Caps all housed in a custom-designed SKB® hard-shell case. Contact your Blue dealer for details.
For over 20 years, Blue has delivered the state of the art in microphone design to the world's top artists and studios. Our flagship, the Bottle Mic Locker Tube Microphone System embodies an artisanal blend of soul and character for a palette of unique and magnificent voices for your studio. Every Bottle Mic Locker is individually handmade in Westlake Village, CA by our production team of microphone engineers.
BLUE BOTTLE MIC LOCKER CUSTOM SHOP SYSTEM:
Blue Bottle microphone with custom multi-stage powder coat finish
Fully discrete Class A tube circuit with EF86 vacuum tube
Infinite tonal variation with 4 interchangeable Bottle Caps (B0, B6, B7, B8)
Power Stream tube mic power supply with matching custom finish
Custom laser cut SKB® carry case
TECHNICAL SPECIFICATIONS:
Transducer Type: Vacuum Tube Condenser
Polar Patterns: Various (Capsule-dependent)
Frequency Response: 20Hz - 20kHz
Sensitivity: 20.0 mV/Pa at 1kHz (1Pa = 94dB SPL) w/B6 Capsule
Output Impedance: 200 ohms
Rated Load Impedance: Not less than 1k ohm
Maximum SPL: 134 dB SPL (2.5 kohm, 0.5% THD) w/B6 Capsule
S/N Ratio: 56.6 dB-A (IEC 651) w/B6 Capsule
Noise Level: 7.5 dB-A (IEC 651) w/B6 Capsule
Dynamic Range: 126.5dB (@2.5kohm) w/B6 Capsule
Power Requirement: Bottle Power Supple Unit 115/230 VAC, 50/60 Hz
Weight: 1700g
Dimensions: 390mm x 90mm
Compatible with all 12 Bottle Caps from the Blue Bottle Cap Series.  |
| |
 | Bottle Mic Locker - Flagship Tube Microphone and Capsule Collection
Custom Hammer-Tone Blue. Blue Microphones. General Merchandise. Published by Blue Micropho...(+) Custom Hammer-Tone Blue. Blue Microphones. General Merchandise. Published by Blue Microphones (HL.323291).
Item Number: HL.323291
10x24.5 inches.
The Custom Shop Bottle Mic Locker Limited Edition represents the pinnacle of microphone craftsmanship. Blue's Custom Shop offers a rare opportunity to own a limited edition Bottle. Designed to be the visual and sonic cornerstone of your studio, Custom Shop Bottles feature a variety of special finishes, from metallic, glossy hot rod colors to textured, hammer-tone and matte options. Choose from 6 new limited edition custom shop colors.
For recordists and studios that wish to take advantage of the creative power of the Bottle's interchangeable capsules, The Bottle Mic Locker Limited Edition system includes the Custom Shop Bottle of your choice, plus the B0, B6, B7, and B8 Bottle Caps all housed in a custom-designed SKB® hard-shell case. Contact your Blue dealer for details.
For over 20 years, Blue has delivered the state of the art in microphone design to the world's top artists and studios. Our flagship, the Bottle Mic Locker Tube Microphone System embodies an artisanal blend of soul and character for a palette of unique and magnificent voices for your studio. Every Bottle Mic Locker is individually handmade in Westlake Village, CA by our production team of microphone engineers.
BLUE BOTTLE MIC LOCKER CUSTOM SHOP SYSTEM:
Blue Bottle microphone with custom multi-stage powder coat finish
Fully discrete Class A tube circuit with EF86 vacuum tube
Infinite tonal variation with 4 interchangeable Bottle Caps (B0, B6, B7, B8)
Power Stream tube mic power supply with matching custom finish
Custom laser cut SKB® carry case
TECHNICAL SPECIFICATIONS:
Transducer Type: Vacuum Tube Condenser
Polar Patterns: Various (Capsule-dependent)
Frequency Response: 20Hz - 20kHz
Sensitivity: 20.0 mV/Pa at 1kHz (1Pa = 94dB SPL) w/B6 Capsule
Output Impedance: 200 ohms
Rated Load Impedance: Not less than 1k ohm
Maximum SPL: 134 dB SPL (2.5 kohm, 0.5% THD) w/B6 Capsule
S/N Ratio: 56.6 dB-A (IEC 651) w/B6 Capsule
Noise Level: 7.5 dB-A (IEC 651) w/B6 Capsule
Dynamic Range: 126.5dB (@2.5kohm) w/B6 Capsule
Power Requirement: Bottle Power Supple Unit 115/230 VAC, 50/60 Hz
Weight: 1700g
Dimensions: 390mm x 90mm
Compatible with all 12 Bottle Caps from the Blue Bottle Cap Series. |
| |
 | Bottle Mic Locker - Flagship Tube Microphone and Capsule Collection
Custom Textured Matte Black. Blue Microphones. General Merchandise. Published by Blue Micr...(+) Custom Textured Matte Black. Blue Microphones. General Merchandise. Published by Blue Microphones (HL.323294).
Item Number: HL.323294
10x24.5 inches.
The Custom Shop Bottle Mic Locker Limited Edition represents the pinnacle of microphone craftsmanship. Blue's Custom Shop offers a rare opportunity to own a limited edition Bottle. Designed to be the visual and sonic cornerstone of your studio, Custom Shop Bottles feature a variety of special finishes, from metallic, glossy hot rod colors to textured, hammer-tone and matte options. Choose from 6 new limited edition custom shop colors.
For recordists and studios that wish to take advantage of the creative power of the Bottle's interchangeable capsules, The Bottle Mic Locker Limited Edition system includes the Custom Shop Bottle of your choice, plus the B0, B6, B7, and B8 Bottle Caps all housed in a custom-designed SKB® hard-shell case. Contact your Blue dealer for details.
For over 20 years, Blue has delivered the state of the art in microphone design to the world's top artists and studios. Our flagship, the Bottle Mic Locker Tube Microphone System embodies an artisanal blend of soul and character for a palette of unique and magnificent voices for your studio. Every Bottle Mic Locker is individually handmade in Westlake Village, CA by our production team of microphone engineers.
BLUE BOTTLE MIC LOCKER CUSTOM SHOP SYSTEM:
Blue Bottle microphone with custom multi-stage powder coat finish
Fully discrete Class A tube circuit with EF86 vacuum tube
Infinite tonal variation with 4 interchangeable Bottle Caps (B0, B6, B7, B8)
Power Stream tube mic power supply with matching custom finish
Custom laser cut SKB® carry case
TECHNICAL SPECIFICATIONS:
Transducer Type: Vacuum Tube Condenser
Polar Patterns: Various (Capsule-dependent)
Frequency Response: 20Hz - 20kHz
Sensitivity: 20.0 mV/Pa at 1kHz (1Pa = 94dB SPL) w/B6 Capsule
Output Impedance: 200 ohms
Rated Load Impedance: Not less than 1k ohm
Maximum SPL: 134 dB SPL (2.5 kohm, 0.5% THD) w/B6 Capsule
S/N Ratio: 56.6 dB-A (IEC 651) w/B6 Capsule
Noise Level: 7.5 dB-A (IEC 651) w/B6 Capsule
Dynamic Range: 126.5dB (@2.5kohm) w/B6 Capsule
Power Requirement: Bottle Power Supple Unit 115/230 VAC, 50/60 Hz
Weight: 1700g
Dimensions: 390mm x 90mm
Compatible with all 12 Bottle Caps from the Blue Bottle Cap Series. |
| |
 | Bottle Mic Locker - Flagship Tube Microphone and Capsule Collection
Custom Classy Green. Blue Microphones. General Merchandise. Published by Blue Microphones ...(+) Custom Classy Green. Blue Microphones. General Merchandise. Published by Blue Microphones (HL.323290).
Item Number: HL.323290
10x24.5 inches.
The Custom Shop Bottle Mic Locker Limited Edition represents the pinnacle of microphone craftsmanship. Blue's Custom Shop offers a rare opportunity to own a limited edition Bottle. Designed to be the visual and sonic cornerstone of your studio, Custom Shop Bottles feature a variety of special finishes, from metallic, glossy hot rod colors to textured, hammer-tone and matte options. Choose from 6 new limited edition custom shop colors.
For recordists and studios that wish to take advantage of the creative power of the Bottle's interchangeable capsules, The Bottle Mic Locker Limited Edition system includes the Custom Shop Bottle of your choice, plus the B0, B6, B7, and B8 Bottle Caps all housed in a custom-designed SKB® hard-shell case. Contact your Blue dealer for details.
For over 20 years, Blue has delivered the state of the art in microphone design to the world's top artists and studios. Our flagship, the Bottle Mic Locker Tube Microphone System embodies an artisanal blend of soul and character for a palette of unique and magnificent voices for your studio. Every Bottle Mic Locker is individually handmade in Westlake Village, CA by our production team of microphone engineers.
BLUE BOTTLE MIC LOCKER CUSTOM SHOP SYSTEM:
Blue Bottle microphone with custom multi-stage powder coat finish
Fully discrete Class A tube circuit with EF86 vacuum tube
Infinite tonal variation with 4 interchangeable Bottle Caps (B0, B6, B7, B8)
Power Stream tube mic power supply with matching custom finish
Custom laser cut SKB® carry case
TECHNICAL SPECIFICATIONS:
Transducer Type: Vacuum Tube Condenser
Polar Patterns: Various (Capsule-dependent)
Frequency Response: 20Hz - 20kHz
Sensitivity: 20.0 mV/Pa at 1kHz (1Pa = 94dB SPL) w/B6 Capsule
Output Impedance: 200 ohms
Rated Load Impedance: Not less than 1k ohm
Maximum SPL: 134 dB SPL (2.5 kohm, 0.5% THD) w/B6 Capsule
S/N Ratio: 56.6 dB-A (IEC 651) w/B6 Capsule
Noise Level: 7.5 dB-A (IEC 651) w/B6 Capsule
Dynamic Range: 126.5dB (@2.5kohm) w/B6 Capsule
Power Requirement: Bottle Power Supple Unit 115/230 VAC, 50/60 Hz
Weight: 1700g
Dimensions: 390mm x 90mm
Compatible with all 12 Bottle Caps from the Blue Bottle Cap Series. |
| |
 | Bottle Mic Locker - Flagship Tube Microphone and Capsule Collection
Custom Hot Rod Orange. Blue Microphones. General Merchandise. Published by Blue Microphone...(+) Custom Hot Rod Orange. Blue Microphones. General Merchandise. Published by Blue Microphones (HL.323292).
Item Number: HL.323292
10x24.5 inches.
The Custom Shop Bottle Mic Locker Limited Edition represents the pinnacle of microphone craftsmanship. Blue's Custom Shop offers a rare opportunity to own a limited edition Bottle. Designed to be the visual and sonic cornerstone of your studio, Custom Shop Bottles feature a variety of special finishes, from metallic, glossy hot rod colors to textured, hammer-tone and matte options. Choose from 6 new limited edition custom shop colors.
For recordists and studios that wish to take advantage of the creative power of the Bottle's interchangeable capsules, The Bottle Mic Locker Limited Edition system includes the Custom Shop Bottle of your choice, plus the B0, B6, B7, and B8 Bottle Caps all housed in a custom-designed SKB® hard-shell case. Contact your Blue dealer for details.
For over 20 years, Blue has delivered the state of the art in microphone design to the world's top artists and studios. Our flagship, the Bottle Mic Locker Tube Microphone System embodies an artisanal blend of soul and character for a palette of unique and magnificent voices for your studio. Every Bottle Mic Locker is individually handmade in Westlake Village, CA by our production team of microphone engineers.
BLUE BOTTLE MIC LOCKER CUSTOM SHOP SYSTEM:
Blue Bottle microphone with custom multi-stage powder coat finish
Fully discrete Class A tube circuit with EF86 vacuum tube
Infinite tonal variation with 4 interchangeable Bottle Caps (B0, B6, B7, B8)
Power Stream tube mic power supply with matching custom finish
Custom laser cut SKB® carry case
TECHNICAL SPECIFICATIONS:
Transducer Type: Vacuum Tube Condenser
Polar Patterns: Various (Capsule-dependent)
Frequency Response: 20Hz - 20kHz
Sensitivity: 20.0 mV/Pa at 1kHz (1Pa = 94dB SPL) w/B6 Capsule
Output Impedance: 200 ohms
Rated Load Impedance: Not less than 1k ohm
Maximum SPL: 134 dB SPL (2.5 kohm, 0.5% THD) w/B6 Capsule
S/N Ratio: 56.6 dB-A (IEC 651) w/B6 Capsule
Noise Level: 7.5 dB-A (IEC 651) w/B6 Capsule
Dynamic Range: 126.5dB (@2.5kohm) w/B6 Capsule
Power Requirement: Bottle Power Supple Unit 115/230 VAC, 50/60 Hz
Weight: 1700g
Dimensions: 390mm x 90mm
Compatible with all 12 Bottle Caps from the Blue Bottle Cap Series. |
| |
 | Bottle Mic Locker - Flagship Tube Microphone and Capsule Collection
Custom Textured Matte Lilac. Blue Microphones. General Merchandise. Published by Blue Micr...(+) Custom Textured Matte Lilac. Blue Microphones. General Merchandise. Published by Blue Microphones (HL.323295).
Item Number: HL.323295
10x24 inches.
The Custom Shop Bottle Mic Locker Limited Edition represents the pinnacle of microphone craftsmanship. Blue's Custom Shop offers a rare opportunity to own a limited edition Bottle. Designed to be the visual and sonic cornerstone of your studio, Custom Shop Bottles feature a variety of special finishes, from metallic, glossy hot rod colors to textured, hammer-tone and matte options. Choose from 6 new limited edition custom shop colors.
For recordists and studios that wish to take advantage of the creative power of the Bottle's interchangeable capsules, The Bottle Mic Locker Limited Edition system includes the Custom Shop Bottle of your choice, plus the B0, B6, B7, and B8 Bottle Caps all housed in a custom-designed SKB® hard-shell case. Contact your Blue dealer for details.
For over 20 years, Blue has delivered the state of the art in microphone design to the world's top artists and studios. Our flagship, the Bottle Mic Locker Tube Microphone System embodies an artisanal blend of soul and character for a palette of unique and magnificent voices for your studio. Every Bottle Mic Locker is individually handmade in Westlake Village, CA by our production team of microphone engineers.
BLUE BOTTLE MIC LOCKER CUSTOM SHOP SYSTEM:
Blue Bottle microphone with custom multi-stage powder coat finish
Fully discrete Class A tube circuit with EF86 vacuum tube
Infinite tonal variation with 4 interchangeable Bottle Caps (B0, B6, B7, B8)
Power Stream tube mic power supply with matching custom finish
Custom laser cut SKB® carry case
TECHNICAL SPECIFICATIONS:
Transducer Type: Vacuum Tube Condenser
Polar Patterns: Various (Capsule-dependent)
Frequency Response: 20Hz - 20kHz
Sensitivity: 20.0 mV/Pa at 1kHz (1Pa = 94dB SPL) w/B6 Capsule
Output Impedance: 200 ohms
Rated Load Impedance: Not less than 1k ohm
Maximum SPL: 134 dB SPL (2.5 kohm, 0.5% THD) w/B6 Capsule
S/N Ratio: 56.6 dB-A (IEC 651) w/B6 Capsule
Noise Level: 7.5 dB-A (IEC 651) w/B6 Capsule
Dynamic Range: 126.5dB (@2.5kohm) w/B6 Capsule
Power Requirement: Bottle Power Supple Unit 115/230 VAC, 50/60 Hz
Weight: 1700g
Dimensions: 390mm x 90mm
Compatible with all 12 Bottle Caps from the Blue Bottle Cap Series. |
| |
 | Bottle Microphone System with SKB Case
Custom Glassy Green. Blue Microphones. General Merchandise. Published by Blue Microphones ...(+) Custom Glassy Green. Blue Microphones. General Merchandise. Published by Blue Microphones (HL.323297).
Item Number: HL.323297
10x24.5 inches.
The Bottle Custom Shop offers a rare opportunity to own a limited edition Bottle. Designed to be the visual and sonic cornerstone of a studio, Custom Shop Bottles feature a variety of special finishes, from metallic, glossy hot rod colors to textured, hammer-tone and matte options. Choose from 6 new limited edition custom shop colors.
For over 20 years, Blue has delivered the state of the art in microphone design to the world's top artists and studios. Our flagship, the Bottle Tube Microphone System embodies an artisanal blend of soul and character for a palette of unique and magnificent voices for your studio. Every Bottle is individually handmade in Westlake Village, CA by our production team of microphone engineers.
Fully discrete Class A tube circuit with EF86 vacuum tube
Infinite tonal variation with interchangeable Bottle Caps
INcluded B6 Bottle Cap provides larger-than-life vocal and instrument sound
Power Stream Tube Mic power supply with variable capsule sensitivity dial
Custom multi-stage powder coat finish
BLUE BOTTLE CUSTOM SHOP SYSTEM
Blue Bottle microphone with custom finish
B6 Bottle Cap
Power Stream tube mic power supply with matching custom finish
Laser cut SKB® carry case
TECHNICAL SPECIFICATIONS:
Transducer Type: Vacuum Tube Condenser
Polar Patterns: Various (Capsule-dependent)
Frequency Response: 20Hz - 20kHz
Sensitivity: 20.0 mV/Pa at 1kHz (1Pa = 94dB SPL) w/B6 Capsule
Output Impedance: 200 ohms
Rated Load Impedance: Not less than 1kohm
Maximum SPL: 134 dB SPL (2.5kohm, 0.5% THD) w/B6 Capsule
S/N Ratio: 56.5 dB-A (IEC 651) w/B6 Capsule
Noise Level: 7.5 dB-A (IEC 651) w/B6 Capsule
Dynamic Range: 126.5dB (@2.5kohm) w/B6 Capsule
Power Requirement: Bottle Power Supple Unit 115/230 VAC, 50/60 Hz
Weight: 1700g
Dimensions: 390mm x 90mm. |
| |
 | Bottle Microphone System with SKB Case
Custom Textured Matte Lilac. Blue Microphones. General Merchandise. Published by Blue Micr...(+) Custom Textured Matte Lilac. Blue Microphones. General Merchandise. Published by Blue Microphones (HL.323302).
Item Number: HL.323302
10x24 inches.
The Bottle Custom Shop offers a rare opportunity to own a limited edition Bottle. Designed to be the visual and sonic cornerstone of a studio, Custom Shop Bottles feature a variety of special finishes, from metallic, glossy hot rod colors to textured, hammer-tone and matte options. Choose from 6 new limited edition custom shop colors.
For over 20 years, Blue has delivered the state of the art in microphone design to the world's top artists and studios. Our flagship, the Bottle Tube Microphone System embodies an artisanal blend of soul and character for a palette of unique and magnificent voices for your studio. Every Bottle is individually handmade in Westlake Village, CA by our production team of microphone engineers.
Fully discrete Class A tube circuit with EF86 vacuum tube
Infinite tonal variation with interchangeable Bottle Caps
INcluded B6 Bottle Cap provides larger-than-life vocal and instrument sound
Power Stream Tube Mic power supply with variable capsule sensitivity dial
Custom multi-stage powder coat finish
BLUE BOTTLE CUSTOM SHOP SYSTEM
Blue Bottle microphone with custom finish
B6 Bottle Cap
Power Stream tube mic power supply with matching custom finish
Laser cut SKB® carry case
TECHNICAL SPECIFICATIONS:
Transducer Type: Vacuum Tube Condenser
Polar Patterns: Various (Capsule-dependent)
Frequency Response: 20Hz - 20kHz
Sensitivity: 20.0 mV/Pa at 1kHz (1Pa = 94dB SPL) w/B6 Capsule
Output Impedance: 200 ohms
Rated Load Impedance: Not less than 1kohm
Maximum SPL: 134 dB SPL (2.5kohm, 0.5% THD) w/B6 Capsule
S/N Ratio: 56.5 dB-A (IEC 651) w/B6 Capsule
Noise Level: 7.5 dB-A (IEC 651) w/B6 Capsule
Dynamic Range: 126.5dB (@2.5kohm) w/B6 Capsule
Power Requirement: Bottle Power Supple Unit 115/230 VAC, 50/60 Hz
Weight: 1700g
Dimensions: 390mm x 90mm. |
| |
 | Bottle Microphone System with SKB Case
Custom Textured Matte Black. Blue Microphones. General Merchandise. Published by Blue Micr...(+) Custom Textured Matte Black. Blue Microphones. General Merchandise. Published by Blue Microphones (HL.323301).
Item Number: HL.323301
9x18.5 inches.
The Bottle Custom Shop offers a rare opportunity to own a limited edition Bottle. Designed to be the visual and sonic cornerstone of a studio, Custom Shop Bottles feature a variety of special finishes, from metallic, glossy hot rod colors to textured, hammer-tone and matte options. Choose from 6 new limited edition custom shop colors.
For over 20 years, Blue has delivered the state of the art in microphone design to the world's top artists and studios. Our flagship, the Bottle Tube Microphone System embodies an artisanal blend of soul and character for a palette of unique and magnificent voices for your studio. Every Bottle is individually handmade in Westlake Village, CA by our production team of microphone engineers.
Fully discrete Class A tube circuit with EF86 vacuum tube
Infinite tonal variation with interchangeable Bottle Caps
INcluded B6 Bottle Cap provides larger-than-life vocal and instrument sound
Power Stream Tube Mic power supply with variable capsule sensitivity dial
Custom multi-stage powder coat finish
BLUE BOTTLE CUSTOM SHOP SYSTEM
Blue Bottle microphone with custom finish
B6 Bottle Cap
Power Stream tube mic power supply with matching custom finish
Laser cut SKB® carry case
TECHNICAL SPECIFICATIONS:
Transducer Type: Vacuum Tube Condenser
Polar Patterns: Various (Capsule-dependent)
Frequency Response: 20Hz - 20kHz
Sensitivity: 20.0 mV/Pa at 1kHz (1Pa = 94dB SPL) w/B6 Capsule
Output Impedance: 200 ohms
Rated Load Impedance: Not less than 1kohm
Maximum SPL: 134 dB SPL (2.5kohm, 0.5% THD) w/B6 Capsule
S/N Ratio: 56.5 dB-A (IEC 651) w/B6 Capsule
Noise Level: 7.5 dB-A (IEC 651) w/B6 Capsule
Dynamic Range: 126.5dB (@2.5kohm) w/B6 Capsule
Power Requirement: Bottle Power Supple Unit 115/230 VAC, 50/60 Hz
Weight: 1700g
Dimensions: 390mm x 90mm. |
| |
 | Bottle Microphone System with SKB Case
Custom Hot Rod Orange. Blue Microphones. General Merchandise. Published by Blue Microphone...(+) Custom Hot Rod Orange. Blue Microphones. General Merchandise. Published by Blue Microphones (HL.323299).
Item Number: HL.323299
10x24.5 inches.
The Bottle Custom Shop offers a rare opportunity to own a limited edition Bottle. Designed to be the visual and sonic cornerstone of a studio, Custom Shop Bottles feature a variety of special finishes, from metallic, glossy hot rod colors to textured, hammer-tone and matte options. Choose from 6 new limited edition custom shop colors.
For over 20 years, Blue has delivered the state of the art in microphone design to the world's top artists and studios. Our flagship, the Bottle Tube Microphone System embodies an artisanal blend of soul and character for a palette of unique and magnificent voices for your studio. Every Bottle is individually handmade in Westlake Village, CA by our production team of microphone engineers.
Fully discrete Class A tube circuit with EF86 vacuum tube
Infinite tonal variation with interchangeable Bottle Caps
INcluded B6 Bottle Cap provides larger-than-life vocal and instrument sound
Power Stream Tube Mic power supply with variable capsule sensitivity dial
Custom multi-stage powder coat finish
BLUE BOTTLE CUSTOM SHOP SYSTEM
Blue Bottle microphone with custom finish
B6 Bottle Cap
Power Stream tube mic power supply with matching custom finish
Laser cut SKB® carry case
TECHNICAL SPECIFICATIONS:
Transducer Type: Vacuum Tube Condenser
Polar Patterns: Various (Capsule-dependent)
Frequency Response: 20Hz - 20kHz
Sensitivity: 20.0 mV/Pa at 1kHz (1Pa = 94dB SPL) w/B6 Capsule
Output Impedance: 200 ohms
Rated Load Impedance: Not less than 1kohm
Maximum SPL: 134 dB SPL (2.5kohm, 0.5% THD) w/B6 Capsule
S/N Ratio: 56.5 dB-A (IEC 651) w/B6 Capsule
Noise Level: 7.5 dB-A (IEC 651) w/B6 Capsule
Dynamic Range: 126.5dB (@2.5kohm) w/B6 Capsule
Power Requirement: Bottle Power Supple Unit 115/230 VAC, 50/60 Hz
Weight: 1700g
Dimensions: 390mm x 90mm. |
| |
 | Bottle Microphone System with SKB Case
Custom Hammer-Tone Blue. Blue Microphones. General Merchandise. Published by Blue Micropho...(+) Custom Hammer-Tone Blue. Blue Microphones. General Merchandise. Published by Blue Microphones (HL.323298).
Item Number: HL.323298
9x23 inches.
The Bottle Custom Shop offers a rare opportunity to own a limited edition Bottle. Designed to be the visual and sonic cornerstone of a studio, Custom Shop Bottles feature a variety of special finishes, from metallic, glossy hot rod colors to textured, hammer-tone and matte options. Choose from 6 new limited edition custom shop colors.
For over 20 years, Blue has delivered the state of the art in microphone design to the world's top artists and studios. Our flagship, the Bottle Tube Microphone System embodies an artisanal blend of soul and character for a palette of unique and magnificent voices for your studio. Every Bottle is individually handmade in Westlake Village, CA by our production team of microphone engineers.
• Fully discrete Class A tube circuit with EF86 vacuum tube
• Infinite tonal variation with interchangeable Bottle Caps
• INcluded B6 Bottle Cap provides larger-than-life vocal and instrument sound
• Power Stream Tube Mic power supply with variable capsule sensitivity dial
• Custom multi-stage powder coat finish
BLUE BOTTLE CUSTOM SHOP SYSTEM
• Blue Bottle microphone with custom finish
• B6 Bottle Cap
• Power Stream tube mic power supply with matching custom finish
• Laser cut SKB® carry case
TECHNICAL SPECIFICATIONS:
• Transducer Type: Vacuum Tube Condenser
• Polar Patterns: Various (Capsule-dependent)
• Frequency Response: 20Hz - 20kHz
Sensitivity: 20.0 mV/Pa at 1kHz (1Pa = 94dB SPL) w/B6 Capsule
• Output Impedance: 200 ohms
• Rated Load Impedance: Not less than 1kohm
• Maximum SPL: 134 dB SPL (2.5kohm, 0.5% THD) w/B6 Capsule
• S/N Ratio: 56.5 dB-A (IEC 651) w/B6 Capsule
• Noise Level: 7.5 dB-A (IEC 651) w/B6 Capsule
• Dynamic Range: 126.5dB (@2.5kohm) w/B6 Capsule
• Power Requirement: Bottle Power Supple Unit 115/230 VAC, 50/60 Hz
• Weight: 1700g
• Dimensions: 390mm x 90mm. |
| |
 | Bottle Microphone System with SKB Case
Custom Raspberry Beret. Blue Microphones. General Merchandise. Published by Blue Microphon...(+) Custom Raspberry Beret. Blue Microphones. General Merchandise. Published by Blue Microphones (HL.323300).
Item Number: HL.323300
9x19 inches.
The Bottle Custom Shop offers a rare opportunity to own a limited edition Bottle. Designed to be the visual and sonic cornerstone of a studio, Custom Shop Bottles feature a variety of special finishes, from metallic, glossy hot rod colors to textured, hammer-tone and matte options. Choose from 6 new limited edition custom shop colors.
For over 20 years, Blue has delivered the state of the art in microphone design to the world's top artists and studios. Our flagship, the Bottle Tube Microphone System embodies an artisanal blend of soul and character for a palette of unique and magnificent voices for your studio. Every Bottle is individually handmade in Westlake Village, CA by our production team of microphone engineers.
Fully discrete Class A tube circuit with EF86 vacuum tube
Infinite tonal variation with interchangeable Bottle Caps
INcluded B6 Bottle Cap provides larger-than-life vocal and instrument sound
Power Stream Tube Mic power supply with variable capsule sensitivity dial
Custom multi-stage powder coat finish
BLUE BOTTLE CUSTOM SHOP SYSTEM
Blue Bottle microphone with custom finish
B6 Bottle Cap
Power Stream tube mic power supply with matching custom finish
Laser cut SKB® carry case
TECHNICAL SPECIFICATIONS:
Transducer Type: Vacuum Tube Condenser
Polar Patterns: Various (Capsule-dependent)
Frequency Response: 20Hz - 20kHz
Sensitivity: 20.0 mV/Pa at 1kHz (1Pa = 94dB SPL) w/B6 Capsule
Output Impedance: 200 ohms
Rated Load Impedance: Not less than 1kohm
Maximum SPL: 134 dB SPL (2.5kohm, 0.5% THD) w/B6 Capsule
S/N Ratio: 56.5 dB-A (IEC 651) w/B6 Capsule
Noise Level: 7.5 dB-A (IEC 651) w/B6 Capsule
Dynamic Range: 126.5dB (@2.5kohm) w/B6 Capsule
Power Requirement: Bottle Power Supple Unit 115/230 VAC, 50/60 Hz
Weight: 1700g
Dimensions: 390mm x 90mm. |
| |
 | Bottle Microphone System with SKB Case
Blue (Standard). Blue Microphones. General Merchandise. Published by Blue Microphones (HL....(+) Blue (Standard). Blue Microphones. General Merchandise. Published by Blue Microphones (HL.323296).
Item Number: HL.323296
9.75x24.25 inches.
The Bottle Custom Shop offers a rare opportunity to own a limited edition Bottle. Designed to be the visual and sonic cornerstone of a studio, Custom Shop Bottles feature a variety of special finishes, from metallic, glossy hot rod colors to textured, hammer-tone and matte options. Choose from 6 new limited edition custom shop colors.
For over 20 years, Blue has delivered the state of the art in microphone design to the world's top artists and studios. Our flagship, the Bottle Tube Microphone System embodies an artisanal blend of soul and character for a palette of unique and magnificent voices for your studio. Every Bottle is individually handmade in Westlake Village, CA by our production team of microphone engineers.
Fully discrete Class A tube circuit with EF86 vacuum tube
Infinite tonal variation with interchangeable Bottle Caps
INcluded B6 Bottle Cap provides larger-than-life vocal and instrument sound
Power Stream Tube Mic power supply with variable capsule sensitivity dial
Custom multi-stage powder coat finish
BLUE BOTTLE CUSTOM SHOP SYSTEM
Blue Bottle microphone with custom finish
B6 Bottle Cap
Power Stream tube mic power supply with matching custom finish
Laser cut SKB® carry case
TECHNICAL SPECIFICATIONS:
Transducer Type: Vacuum Tube Condenser
Polar Patterns: Various (Capsule-dependent)
Frequency Response: 20Hz - 20kHz
Sensitivity: 20.0 mV/Pa at 1kHz (1Pa = 94dB SPL) w/B6 Capsule
Output Impedance: 200 ohms
Rated Load Impedance: Not less than 1kohm
Maximum SPL: 134 dB SPL (2.5kohm, 0.5% THD) w/B6 Capsule
S/N Ratio: 56.5 dB-A (IEC 651) w/B6 Capsule
Noise Level: 7.5 dB-A (IEC 651) w/B6 Capsule
Dynamic Range: 126.5dB (@2.5kohm) w/B6 Capsule
Power Requirement: Bottle Power Supple Unit 115/230 VAC, 50/60 Hz
Weight: 1700g
Dimensions: 390mm x 90mm. |
| |
