| Eurolite : ED Strip RGBW 4-Ch DMX Contr. (9 comments)
Convertit les signaux DMX512 standard en signaux PWM, par ex. pour les bandes de LED- 4 ca...(+) Convertit les signaux DMX512 standard en signaux PWM, par ex. pour les bandes de LED- 4 canaux de commande séparés pour le mélange des couleurs des LED rouges, vertes, bleues et blanches- Programmes intégrés pour un fonctionnement autonome (couleurs individuelles, changement de couleur, mélange de couleurs, vitesse de déroulement)- Adressage DMX et réglages par commutateur DIP- Résistance de terminaison activable- Borniers enfichables à vis pour le raccordement des LED et de l'alimentation électrique- Prises RJ45 pour le montage en série- Utilisable en mode 4 canaux DMX- Alimentation en tension : 12/24V CC- Consommation : max. 384 Watt 12 V CC, max. 768 Watt 24 V CC, max. 96 Watt 12 V CC par canal, max. 192 Watt 24 V CC par canal- Courant de sortie : max. 4 x 8 A par canal- Raccordement de l'alimentation : borniers à vis- Sortie d'alimentation : borniers à vis- Canaux DMX : 4- Entrée DMX : borniers à vis, 1x RJ-45 (W) version encastrée- Boîtier métallique robuste- Dimensions (L x l x H) : 16,4 x 6,6 x 3,8 cm- Poids : 300 g- Couleur : noir |
|
| Stairville : LED Pixel Rail 40 RGB Bundle 2 Stairville Pixel Rail Drive 640R- 16 pièce Stairville LED Pixel Rail 40 RGB MKII |
|
| Botex : LED Stripe RGBWW 10m (3 comments)
Ruban LED RGBWW puissant pour une installation permanente- Couleur de la lumière: RGB + b...(+) Ruban LED RGBWW puissant pour une installation permanente- Couleur de la lumière: RGB + blanc chaud- 60 LEDs SMD chaque mètre- Angle de faisceau: 120°- Longueur: 10 m- Largeur: 12 mm- Hauteur: 3 mm- Possibilité de couper tous les 10 cm- Tension d'entrée: 24 V DC- Indice de protection: IP20- Ballast/contrôleur pour rubans LED 554122 optionnel non-fourni |
|
| Enttec : Pixelator Mini
Developed to simplify the control of LED pixel dots and strips- Converts up to 8,192 chann...(+) Developed to simplify the control of LED pixel dots and strips- Converts up to 8,192 channels (2,730 RGB pixels) via its 8 PLink outputs (2 universes per port) with perfect synchronisation- Acts as the centre of the PLink control system from ENTTEC- Converts eDMX (e.g. Art-Net, sACN and ESP) to SPI in the PLINK system for pixel control over long distances- 1 x RJ45 Ethernet input (10/100 Mbit/s) to 8 x RJ45 output ports, each enabling PLINK data output via Cat5e/Cat6 cable- Up to 32 universes (4 U per port) Pixel control in overdrive mode- Active IEEE 802.3AF Active PoE or 12-24 V DC power input- All ports have ESD surge protection and resettable fuses to block external faults and the spread of electrical noise through the control network- Compatible with the ENTTEC PLINK INJECTOR series- Compatible with the automatically addressable RGBW LED dimmer ENTTEC CVC4- The pixel arrangement including pixel sequence and pixel grouping for each PLINK output can be configured individually- Scope of delivery: Pixelator Mini, 1 x 2 m CAT5 cable, 1 x 12 V power supply adapter with international plugs, rack mounting bracket, surface/DIN mounting bracket, DIN clip and screws- Connections: 8 x PLINK output (RJ45)- 1 x Power input (DC)- 1 x Ethernet (RJ45)- ESD protection: resettable fuse and TVS suppression per port- Surge protection: Yes (all ports)- IP rating: IP20- Input protocols: Art.Net, sACN, ESP- Output protocol: SPI in the PLINK system- max. output universes: 32- Network speed: 10/100Base-T- Network configuration: Static / DHCP- Configuration and update: Web interface- Input voltage: 12-24 V DC/PoE IEEE802.3AF- Max. power consumption: 8 W- Cooling method: Convection- Operating temperature: -20°C to +50°C- Housing material: ABS + anodised aluminium- Dimensions: 390 x 210 x 110 mm- Weight: 0.79 g |
|
| Stairville : Pixel Rail Drive 640R (3 comments)
Convient pour un maximum de 16 unités Stairville LED Pixel Rail 40 RGB MKII- Contrôles :...(+) Convient pour un maximum de 16 unités Stairville LED Pixel Rail 40 RGB MKII- Contrôles : DMX (10/55 canaux), ArtNet (4x480 canaux), RDM- Effets internes : 30 programmes- Entrée et sortie de l'alimentation électrique : Power Twist- Entrée et sortie DMX : XLR 3 broches & XLR 5 broches- Réseau : entrée & sortie RJ45- Refroidissement : Convection- Variateur : 0-100%- Strobe : 0-25 Hz- Logement : aluminium- Classe de protection : IP20- Consommation électrique : 400 Watt Max- Format rack 19" - 2U- Dimensions (L x H x P) : 484 x 90 x 448 mm- Poids : 7,8 kg- Couleur : Noir |
|
| Botex : LED Stripe RGBWW 5m (3 comments)
Ruban LED RGBWW puissant pour une installation permanente- Couleur de la lumière: RGB + b...(+) Ruban LED RGBWW puissant pour une installation permanente- Couleur de la lumière: RGB + blanc chaud- 60 LEDs SMD chaque mètre- Angle de faisceau: 120°- Longueur: 5 m- Largeur: 12 mm- Hauteur: 3 mm- Possibilité de couper tous les 10 cm- Tension d'entrée: 24 V DC- Indice de protection: IP20- Ballast/contrôleur pour rubans LED 554122 optionnel non-fourni |
|
| Botex : LED Stripe RGBWW IP 10m (1 comments)
Ruban LED RGBWW puissant pour une installation permanente- Tuyau en silicone- Couleur de l...(+) Ruban LED RGBWW puissant pour une installation permanente- Tuyau en silicone- Couleur de la lumière: RGB + blanc chaud- 60 LEDs SMD chaque mètre- Angle de faisceau: 120°- Longueur: 10 m- Largeur: 14 mm- Hauteur: 5 mm- Possibilité de couper tous les 10 cm- Tension d'entrée: 24 V DC- Indice de protection: IP65- Ballast/contrôleur pour rubans LED 554122 optionnel non-fourni |
|
| Botex : LED Stripe RGBWW IP 5m (1 comments)
Botex LED Stripe RGBWW IP 5m; powerful RGBWW LED strip for permanent installation; with si...(+) Botex LED Stripe RGBWW IP 5m; powerful RGBWW LED strip for permanent installation; with silicone tube; light colour: RGB+warm white, , 60 SMD LEDs per metre, beam angle: 120°, length: 5m, width: 14 mm, height: 5 mm, cut option per 10cm , input voltage: 24 V DC, , IP protection class: IP65, power supply unit and controller not included; suitable power supply and controller: #554122 |
|
| Enttec : CVC4 CV LED Dimmer 4Ch.
Entrée 12 - 24 V (maximum 20 A)- Sortie vers bandeau de LED (maximum 5 A par canal)- Éno...(+) Entrée 12 - 24 V (maximum 20 A)- Sortie vers bandeau de LED (maximum 5 A par canal)- Énorme taux de rafraîchissement du signal PWM de 1 kHz- Entrée et sortie PLink pour l'adressage automatique (en cas d'utilisation de PLink sur un câble Cat6, chaque unité peut se trouver à une distance maximale de 300 m de la suivante)- Un seul port DMX pour l'entrée DMX/RDM ou le chaînage en guirlande entre les unités- LED d'état et sélection du mode- Commutateur DIP pour passer du débit binaire aux modes de fonctionnement RGB/RGBW- Fusible utilisable par l'utilisateur pour la protection contre les courts-circuits- Refroidissement passif avec protection interne contre la surchauffe- Conception compacte avec trous de montage en surface intégrés de 4 mm- Tension d'entrée : 12 - 24 V CC- Puissance de sortie max. : 240 W @ 12 V / 480 W @ 24 V- Consommation électrique de l'appareil : max. 4 Watt (au repos 0,3 Watt)- Courant nominal max. par canal : 5 Watt- Fréquence de modulation de largeur d'impulsion (PWM) : 1 kHz (fixe)- Modes de montage : 3/4/6/8 canaux- Classe de protection : IP20- Matériau du boîtier : métal plié (revêtement poudré noir)- Dimensions : 112 x 87 x 32 mm- Poids : 0,3 kg- Alimentation et gradation : terminaux à vis- DMX512 : terminaux à vis Phoenix- PLink : RJ45 |
|
| Botex : Controller LED X-Dimmer 3 Pro (7 comments)
Jusqu'à 60 W à 12V et 96W à 24V- Commande DMX, sélection manuelle du programme via cav...(+) Jusqu'à 60 W à 12V et 96W à 24V- Commande DMX, sélection manuelle du programme via cavalier Dipswitch- Également utilisable pour le système X-Chip, adapté à la télévision- DMX 512: Oui- Nombre de canaux DMX: 3 (RVB)- Tension: 12 / 24V DC- Courant: 60/96 Watt, 5 A Max- Dimensions (L x l x H): 90 x 40 x 20 mm- Poids: 0,06 kg- Automatique: Oui |
|
| Ignition : Stagepix Line 100 Cover FF
Convient pour Ignition Stagepix Line 100 IP- Couleur : Blanc givré- Quantité livrée : 4...(+) Convient pour Ignition Stagepix Line 100 IP- Couleur : Blanc givré- Quantité livrée : 4 pièces |
|
| Ignition : Stagepix Brain IP
Convient pour un maximum de 16 Stagepix Line 100 IP ou jusqu'à 32 Stagepix 50 IP- Contrô...(+) Convient pour un maximum de 16 Stagepix Line 100 IP ou jusqu'à 32 Stagepix 50 IP- Contrôle via ArtNet ou DMX- Quatre sorties pour quatre Stagepix 100 IP ou huit Stagepix 50 IP chacune- Support Omega Quick-Mount pour le montage sur traverse- 30 programmes d'éclairage interne pour un fonctionnement autonome- Alimentation électrique : 100 - 240 V ~ 50/60 Hz- Consommation électrique : max. 400 Watt- Dimensions sans support (L x H x P) : 281 x 89 x 280 mm- Poids : 4,2 kg- 4 x bandes de sortie RJ45 IP65- Entrée et sortie DMX : XLR 3 broches- Entrée et sortie Ethernet : RJ45 IP65- Connecteur d'alimentation : Power Twist TR1- Protocole de contrôle : DMX (10/55 canaux), ArtNet (4 x 480 canaux), RDM |
|
| Ignition : Stagepix Line 100 Cover RW
Convient pour Ignition Stagepix Line 100 IP- Couverture plate et effet Frost- Couleur : bl...(+) Convient pour Ignition Stagepix Line 100 IP- Couverture plate et effet Frost- Couleur : blanc- Ensemble de 4 pièces |
|
| Ignition : Stagepix Line 50 Cover FF
Convient pour Ignition Stagepix Line 50 IP- Couvercle plate et effet Frost- Couleur : Noir...(+) Convient pour Ignition Stagepix Line 50 IP- Couvercle plate et effet Frost- Couleur : Noir- Ensemble de 4 pièces |
|
| Ignition : Stagepix Line 100 Cover FFB Couvercle plat noir givré pour Ignition Stagepix Line 100 IP- Ensemble de 4 |
|
| Eurolite : LED Strip 5m 3000K 24V CC
Avec un IRC >90 et un courant continu de 24 V- Pour l'éclairage décoratif en intérieur-...(+) Avec un IRC >90 et un courant continu de 24 V- Pour l'éclairage décoratif en intérieur- Technique de courant continu pour une efficacité élevée- Longue durée de vie et répartition homogène de la lumière- Parfait pour l'éclairage indirect, pour les fabrications spéciales dans l'aménagement de salons ou de magasins et tout type de rétroéclairage- 300x LED blanches extrêmement lumineuses- Température de couleur : 3000° K- Très haut rendu des couleurs avec un indice CRI de plus de 90- Divisible de manière variable en segments (blocs de 6 LED)- Face arrière autocollante- Livraison sur bobine plastique- Câble d'alimentation, connecteurs droits et flexibles disponibles comme accessoires (non inclus dans la livraison)- Unités de commande, blocs d'alimentation et matériel de montage adaptés disponibles séparément (non fournis)- Flux lumineux (lumens) par mètre : 360 lm/m- Raccordement électrique : Câble de raccordement fixe avec extrémités de câble ouvertes- LED/mètre : 60 pièces- Puissance/mètre : 4,5 Watt- LED/ruban : 300 pièces- Espacement des LED : 16 mm- Marquage de la coupe : 10 cm- Alimentation électrique : 24 V AC 1 A- Consommation électrique totale : 23 Watt- Degré de protection : IP20- Longueur : 5 m- Largeur : 8 mm- Hauteur : 2 mm- Poids : 90 g |
|
| Ignition : Stagepix Line 100 Cover FW Blanc- Convient pour Ignition Line 100 IP- Ensemble de 4 pièces |
|
| Ignition : Stagepix Line 50 Cover FW Convient pour Ignition Stagepix Line 50- Couvercle blanc et plat- Ensemble de 4 pièces |
|
| Ignition : Stagepix Line 50 Cover FFB Noir avec effet Frost- Convient pour Ignition Line 50 IP- Ensemble de 4 pièces |
|
| Ignition : Stagepix Line 50 Cover RW
Convient pour Ignition Stagepix Line 50 IP- Couvercle arrondi et effet Frost- Couleur : bl...(+) Convient pour Ignition Stagepix Line 50 IP- Couvercle arrondi et effet Frost- Couleur : blanc- Ensemble de 4 pièces |
|