| Bartolini : BA 57 J1 Set
(9 comments)
Pour basse électrique 5 cordes- Série Original- Pour American J-Bass- Position manche et...(+) Pour basse électrique 5 cordes- Série Original- Pour American J-Bass- Position manche et chevalet- Micros large bande- Longueur micro manche: 101 mm- Longueur micro chevalet: 105 mm £200.41 241.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Bartolini : BA 9J1 Set
(29 comments)
Pour basse Jazz- Design anti-ronflette- Micro manche 9J-S1- Micro chevalet 9J-L1- Ton stan...(+) Pour basse Jazz- Design anti-ronflette- Micro manche 9J-S1- Micro chevalet 9J-L1- Ton standard- Dual In-Line Coil £192.93 232.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Bartolini : 9CBJS L1/S1 Set
(5 comments)
Pour basse style J- Série Classic Bass- Version Deep Tone- Position manche: 9CBJS-S1(vers...(+) Pour basse style J- Série Classic Bass- Version Deep Tone- Position manche: 9CBJS-S1(version courte)- Position chevalet: 9CBJS-L1 (version courte)- Finition: Noir £146.36 176.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Bartolini : BA 9JS1 Neck
(6 comments)
Micro simple bobinage- Position manche- Aimants en céramique- Dimensions: 19 x 91mm- Coul...(+) Micro simple bobinage- Position manche- Aimants en céramique- Dimensions: 19 x 91mm- Couleur: Noir |
|
| Bartolini : BA 9JL1 Bridge
(10 comments)
Pour basse style J 4 cordes- Dual Coil- Position chevalet- Aimant en céramique- Dimension...(+) Pour basse style J 4 cordes- Dual Coil- Position chevalet- Aimant en céramique- Dimensions: 19 x 95 mm- Finition: Noir |
|
| Bartolini : 5-Str Original J-Bass Set BK
Set of Pickups for 5-String Electric Bass
Full, warm and hum-free vintage sound
Bridge pos...(+) Set of Pickups for 5-String Electric Bass
Full, warm and hum-free vintage sound
Bridge position: 59J-L1 (long version)
Neck position: 59J-S1 (short version)
Passive split-coil
Dual Inline Hum-killing
Magnet configuration: carbon steel, ceramic blade magnets (ferrite)
Reversed polarity for bass and treble coils at neck and bridge position
DC resistance bridge position: 7.4 kOhm
DC resistance neck position: 6.7 kOhm
Resonance frequency bridge position: 4.9 kHz
Resonance frequency neck position: 5.7 kHz
60 - 75 mm capture width bridge position
59 - 72 mm capture width neck position
2-Wire, shielded coaxial cable
Hot coiling wire
Dimensions bridge position (L x W x H): 94.7 x 18.5 x 23.6 mm (max. height including cable)
Dimensions neck position (L x W x H): 91.4 x 18.5 x 23.9 mm (max. height including cable)
Colour: Black
Screws and springs not included
Note: Due to the manufacturing process, the plastic housings of Bartolini pickups may show slight signs of processing or handling. For some pickups, the cable ends are also already pre-soldered. These features do not constitute reasons for complaint or return. £200.41 241.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Bartolini : 5-Str Classic J-Bass Set Black
Set of Pickups for 5-String Electric Bass
Full, deep, warm and hum-free sound with clear h...(+) Set of Pickups for 5-String Electric Bass
Full, deep, warm and hum-free sound with clear highs
Suitable for American Standard and Deluxe V J-Basses
Passive split-coil
Dual Inline Hum-killing
Magnet configuration: carbon steel, brass, copper, ceramic blade magnets (ferrite)
Focused detection area
Opposite polarity for bass and treble coils at neck and bridge position
DC resistance bridge position: 10.5 kOhm
DC resistance neck position: 9.3 kOhm
Resonance frequency bridge position: 4.4 kHz
Neck position resonance frequency: 5.2 kHz
60 - 81 mm detection width bar position
59 - 78 mm detection width neck position
2-Conductor, shielded coaxial cable
Hot coiling wire
Dimensions bridge position (L x W x H): 105.2 x 19.6 x 23.9 mm (max. height incl. cable)
Dimensions neck position (L x W x H): 101.6 x 19.6 x 23.9 mm (max. height including cable)
Colour: Black
Delivery without screws and springs
Note: Due to the manufacturing process, the plastic housings of the Bartolini pickups may show slight signs of machining or handling.
For some pickups, the cable ends are already pre-soldered. These properties do not constitute grounds for complaint or return. £184.61 222.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Bartolini : 4-Str Original J-Bass Set BK
Bartolini 4-Str Original J-Bass Set BK; Original J-Bass mixed pickup set for electric bass...(+) Bartolini 4-Str Original J-Bass Set BK; Original J-Bass mixed pickup set for electric bass, 4-string version, rich, warm, hum-free vintage tone, popular Upgrade for J-Bass pickups, set consisting of 9J-L1 (bridge, long) and 9J-S1 (neck, short), split-coil, dual inline hum-killing, magnetic circuit: carbon steel, ceramic blade magnets (ferrite), opposite polarity for bass and treble coils for neck and bridge pickups, DC resistance bridge position 6.7 kOhm, DC resistance neck position 6.1 kOhm, resonant frequency bridge position 4.9 kHz, resonant frequency neck position 5.7 kHz, 48 - 64 mm / 1.89" - 2.52" sensing width, 2-conductor, shielded coaxial cable, core hot, passive, black cover, dimensions bridge position (L x W x H) 94.7 x 18.5 x 23.6 mm / 3.73" x 0.73" x 0.93" (height incl. cable), dimensions neck position (L x W x H) 91.4 x 18.5 x 23.9 mm / 3.6" x 0.73" x 0.94" (height incl. cable), screws and springs are not included, Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return £192.93 232.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Bartolini : 5-string Bass M4 Soapbar BB
Bartolini 5-String Classic Bass M4 Soapbar, Bridge, pickup for electric bass, 5-string ver...(+) Bartolini 5-String Classic Bass M4 Soapbar, Bridge, pickup for electric bass, 5-string version, versatile classic bass voicing, hum-cancelling design, bridge position, dual coil parallel humbucking, magnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, opposite coil polarity, DC resistance 5.6 kOhm each coil, resonant frequency 4.5 kHz, 76 mm / 2.99" max. sensing width, 4-conductor shielded cable with bare drain wire, passive, black cover, dimensions (L x W x H) 101.6 x 38.1 x 24.6 mm / 4.0" x 1.5" x 0.97" (height incl. cable), screws and springs are not included, Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return £131.39 158.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Bartolini : Acoustic Soundhole Pickup
Bartolini Acoustic Soundhole Pickup; Soundhole pickup for acoustic guitar, great natural s...(+) Bartolini Acoustic Soundhole Pickup; Soundhole pickup for acoustic guitar, great natural sound, easy to install, stacked coil, hum-killing, magnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, B-string mass compensation, DC resistance 2.8 kOhm, resonant frequency 9.2 kHz, 55 mm / 2.17" max. sensing width, 3m / 10 ft, 2-conductor, shielded coaxial cable, 6.35 mm / 1/4" plug, passive, black cover, dimensions (L x W x H) 69.9 x 17.5 x 22.6 mm / 2.75" x 0.69" x 0.88" (height incl. cable), fits 89 to 114 mm / 3.5" to 4.5" soundholes (bridge side), Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return £149.68 180.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Bartolini : Gain Piezo Buffer (AGBP/918)
Single-channel buffer preamplifier for electric bass
Clear, transparent sound with extreme...(+) Single-channel buffer preamplifier for electric bass
Clear, transparent sound with extremely low distortion
Suitable for passive pickups with high impedance (piezo and microphone transducers)
Input impedance: 3.3 MOhm
Output impedance: 3.6 ohm
Adjustable gain up to 12 dB
Supports 18V operation for 6 dB additional headroom
Power supply via 1 x 9V / 2 x 9V (18V) battery (not included)
Dimensions (L x W x H): 26.7 x 20.1 x 10.9 mm |
|
| Bartolini : 5-string Bass MK Soapbar BB
Pickup For 5-String Electric Bass
Humbucker with 2 parallel coils
Bridge position
Upgrade ...(+) Pickup For 5-String Electric Bass
Humbucker with 2 parallel coils
Bridge position
Upgrade for Ibanez, Cort, Groove Tools, Lakland and other basses with MK-1 format pickups
Versatile classic bass sound
Magnet configuration: carbon steel, brass, copper, ceramic blade magnets (ferrite)
Focused detection area
Reversed coil polarity
DC resistance: 3.7 kOhm per coil
Resonance frequency: 4.9 kHz
71 mm maximum detection width
4-Wire cable with shielding and plain shield conductor
Passive
Dimensions (L x W x H): 108.2 x 33.5 x 26.2 mm (max. height including cable)
Colour: Black
Note: Screws and springs not included
Note: Due to the manufacturing process, the plastic housings of the Bartolini pickups may show slight signs of machining or handling. For some pickups, the cable ends are already pre-soldered. These characteristics do not constitute grounds for complaint or return. £131.39 158.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Bartolini : Dual Piezo Buffer AGMPBoo Kit
Two-channel buffer preamp set for electric bass
Clear, transparent sound with extremely lo...(+) Two-channel buffer preamp set for electric bass
Clear, transparent sound with extremely low distortion
Suitable for piezo/microphone pickups in combination with magnetic pickups
Two independent buffer circuits to combine two pickups
Circuit identical to AGMPB/918, but with connector for up to 7 plugs of piezo string saddles
Piezo channel input impedance: 3.3 MOhm
Input impedance magnetic channel: 1 MOhm
Output impedance: 3.6 ohm
Per channel adjustable gain up to 12 dB
Supports 18V operation for 6 dB additional headroom
Power supply via 1 x 9V / 2 x 9V (18V) battery (not included)
Dimensions (L x W x H): 26.7 x 20.1 x 10.9 mm
Includes 25 kOhm blend potentiometer |
|
| Bartolini : 6-Str P4 Soapbar Bridge BK
Bartolini 6-Str P4 Soapbar Bridge BK; Classic Bass P4 Soapbar pickup for electric bass, 6-...(+) Bartolini 6-Str P4 Soapbar Bridge BK; Classic Bass P4 Soapbar pickup for electric bass, 6-string version, versatile classic bass voicing, suitable for many 6-string basses, bridge position, dual coil parallel humbucking, magnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, opposite coil polarity, DC resistance 5.7 kOhm each coil, resonant frequency 4.5 kHz, 90 mm / 3.54" max. sensing width, 4-conductor shielded cable with bare drain wire, passive, black cover, dimensions (L x W x H) 117.3 x 31.8 x 23.9 mm / 4.62" x 1.25" x 0.94" (height incl. cable), screws and springs are not included, Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return |
|
| Bartolini : NTMB+F 3-Band Bass Preamp
Preamp Set for Electric Bass
Pre-wired 3-band preamp set for electric bass with 5 potentio...(+) Preamp Set for Electric Bass
Pre-wired 3-band preamp set for electric bass with 5 potentiometers
Toggle switch and active/passive switching
Clear, transparent sound with extremely low distortion
Switchable mid frequency for midrange
Configuration: NTMB+F
1 Volume potentiometer with push/pull function
1 Blend potentiometer
1 Mids potentiometer
1 Treble potentiometer
1 Bass potentiometer
1 Mids switch
250/500/800 Hz mid-frequency switching via 3-way switch
Active/passive (bypass) switching via push/pull switch on the volume potentiometer
Adjustable gain up to 12 dB
Pre-wired for 9V operation (including output jack and battery clip)
Supports 18V operation for 6 dB additional headroom (second battery clip included)
Power supply via 1 x 9V / 2 x 9V (18V) battery (not included)
Module dimensions (L x W x H): 44.7 x 25.9 x 13.7 mm |
|
| Bartolini : 4-Str MK Soapbar Bridge BK
Bartolini 4-Str MK Soapbar Bridge BK; Classic Bass MK Soapbar pickup for electric bass, 4-...(+) Bartolini 4-Str MK Soapbar Bridge BK; Classic Bass MK Soapbar pickup for electric bass, 4-string version, Upgrade for Ibanez, Cort, Groove Tools, Lakland and other basses with MK-1 shaped pickups, versatile classic bass voicing, bridge position, dual coil parallel humbucking, magnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, opposite coil polarity, DC resistance 5.1 kOhm each coil, resonant frequency 4.5 kHz, 60 mm / 2.36" max. sensing width, 4-conductor shielded cable with bare drain wire, passive, black cover, dimensions (L x W x H) 108.2 x 33.5 x 26.2 mm / 4.26" x 1.32" x 1.3" (height incl. cable), screws and springs are not included, Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return £127.23 153.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Bartolini : NTMB+F 3-Band Bass Preamp 4
Preamp Set for Electric Bass
Pre-wired 3-band preamp set for electric bass with 4 potentio...(+) Preamp Set for Electric Bass
Pre-wired 3-band preamp set for electric bass with 4 potentiometers and active/passive switching
Clear, transparent sound with extremely low distortion
Switchable mid frequency for midrange
Configuration: NTMB+F
1 Volume potentiometer with push/pull function
1 Blend potentiometer
1 Mids potentiometer with push/pull function
1 Treble/Bass potentiometer (stacked)
250/800 Hz mid frequency switching via push/pull switch on the mids potentiometer
Active/passive (bypass) switching via push/pull switch on the volume potentiometer
Adjustable gain up to 12 dB
Pre-wired for 9V operation (including output jack and battery clip)
Supports 18V operation for 6 dB additional headroom (second battery clip included)
Power supply via 1 x 9V / 2 x 9V (18V) battery (not included)
Module dimensions (L x W x H): 44.7 x 25.9 x 13.7 mm
Includes ring and center knob for concentric (stacked) potentiometer £234.51 282.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Bartolini : 4-String Original P-Bass BK
Pickup Set for Electric Bass
Big, deep vintage P-Bass sound
Passive Split-P Coil
Hum-killi...(+) Pickup Set for Electric Bass
Big, deep vintage P-Bass sound
Passive Split-P Coil
Hum-killing
Magnet configuration: carbon steel, ceramic blade magnets (ferrite)
Wide detection range
Opposite polarity of the coils
DC resistance: 8.4 kOhm
Resonance frequency: 4.6 kHz
40 - 60 mm detection width
2-Conductor, shielded coaxial cable
Hot coiling wire
Dimensions (L x W x H): 55.9 x 27.4 x 20.3 mm (max. height including cable)
Colour: Black
Delivery without screws and springs
Note: Due to the manufacturing process, the plastic housings of Bartolini pickups may show slight signs of processing or handling.
For some pickups, the cable ends are already pre-soldered.
These characteristics do not constitute grounds for complaint or return. |
|
| Bartolini : 5-string Bass MK Soapbar NB
Bartolini 5-String Classic Bass MK Soapbar, Neck-pickup for electric bass, 5-string versio...(+) Bartolini 5-String Classic Bass MK Soapbar, Neck-pickup for electric bass, 5-string version, Upgrade for Ibanez, Cort, Groove Tools, Lakland and other basses with MK-1 shaped pickups, versatile classic bass voicing, neck position, dual coil parallel humbucking, magnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, opposite coil polarity, DC resistance 3.7 kOhm each coil, resonant frequency 4.9 kHz, 71 mm / 2.8" max. sensing width, 4-conductor shielded cable with bare drain wire, passive, black cover, dimensions (L x W x H) 108.2 x 33.5 x 26.2 mm / 4.26" x 1.32" x 1.3" (height incl. cable), screws and springs are not included, Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return £131.39 158.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Bartolini : 6-string Bass MK Soapbar BB
Pickup for 6-String Electric Bass
Soapbar humbucker with 2 parallel coils
For bridge posit...(+) Pickup for 6-String Electric Bass
Soapbar humbucker with 2 parallel coils
For bridge position
Upgrade for Ibanez, Cort, Groove Tools, Lakland and other basses with MK-1 format pickups
Versatile classic bass sound
4-Wire cable with shielding and plain shield conductor
Magnet configuration: carbon steel, brass, copper, ceramic blade magnets (ferrite)
Reversed coil polarity
DC resistance: 5.7 kOhm per coil
Resonance frequency: 4.5 kHz
Focussed detection range - maximum detection width: 84 mm
Dimensions (L x W x H): 108.2 x 33.5 x 26.2 mm (max. height including cable)
Black cover
Screws and springs not included
Note: Due to the manufacturing process, the plastic housings of Bartolini pickups may show slight signs of processing or handling. For some pickups, the cable ends are also already soldered. These features do not constitute reasons for complaint or return. £134.72 162.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
Bartolini
