| Mutable Instruments : Ears
(26 comments)
Contact Microphone- Open-source hardware and firmware - Outputs not only audio but also ga...(+) Contact Microphone- Open-source hardware and firmware - Outputs not only audio but also gate and envelope signals - Dimensions: 4 HP - Power consumption: 12 V 5 mA, -12 V 5 mA |
|
| Waldorf : KB37 Keyboard
(11 comments)
Note: EuroracaKeyboard for Eurorack modules
Fatar TP9 keyboard with 37 keys and aftertouc...(+) Note: EuroracaKeyboard for Eurorack modules
Fatar TP9 keyboard with 37 keys and aftertouch
Pitchbend- and modulation wheel, glide, octave up/down switch
Gate retrigger
CV interface: 8 CV outputs, pitch, velocity, aftertouch, pitchbend, mod wheel
3 freely definable MIDI controllers
3 trigger outputs
Gate
Clock and Reset outputs for MIDI synchronisation
Module section: Eurorack compatible bus
Integrated power supply: 12 V / -12 V / 1.5 A
Width: 545 mm / 107 HP
USB
MIDI In / Out / Thru
Sustain pedal input
Sensor input and output
2 line outputs: L/R stereo
6.3 mm jack stereo headphone output
Note: Eurorack modules are not included. modules are not included. |
|
| Erica Synths : Black Joystick 2
(0 comments)
Erica Synths Black Joystick 2; Eurorack module; Joystick with 8 CV outputs (4 channels, ea...(+) Erica Synths Black Joystick 2; Eurorack module; Joystick with 8 CV outputs (4 channels, each with outputs for X and Y axis); 2 Gate outputs; Joystick motion recorder with 8 sec. recording time for each channel; LFO and Drone Oscillator modes; CV output range:-5V to +5V; LFO frequency range: 0.1Hz – 10Hz; Drone Oscillator frequency range: 50Hz - 1kHz; power consumption: 71mA (+12V) / 20mA (-12V); width: 12 TE; depth: 30mm |
|
| ACL : Sinfonion
(3 comments)
ACL Sinfonion; Eurorack module; CV processor for creating harmonic pitch-CV; 3 independent...(+) ACL Sinfonion; Eurorack module; CV processor for creating harmonic pitch-CV; 3 independent quantizer channels; four-voice chord generator; Arpeggiator; chord progression sequencer; memory storage for 16 songs; power consumption: 156 mA ( 12 V) / 4 mA (-12 V); width: 42 HP; depth: 25 mm |
|
| Intellijel Designs : Planar 2
(7 comments)
Eurorack Module- Joystick CV controller - Unipolar and bipolar X / Y outputs - 4 Quadrant ...(+) Eurorack Module- Joystick CV controller - Unipolar and bipolar X / Y outputs - 4 Quadrant outputs A-D (0 V - 10 V) - 4 Inputs for audio and control signals for use as a vector mixer, quadraphonic pan controller or crossfader - Generation of gate signals by push button or joystick movements - CV Recorder: Joystick gestures can be recorded for up to 30 seconds - Playback of the joystick movements as loop, one shot and synchronized to external triggers - Power requirement: 85 mA ( 12 V) / 32 mA (-12 V) - Width: 14 TE - Depth: 40 mm |
|
| Doepfer : A-198 (Module + Manual)
(11 comments)
Trautonium Controller- Consists of Doepfer A-198 Module and Ribbon Controller - Ribbon Con...(+) Trautonium Controller- Consists of Doepfer A-198 Module and Ribbon Controller - Ribbon Controller: Generates a control voltage for the pitch of the oscillators by touching the position sensor - Further control voltage can be generated via integrated pressure sensor - Two sub-units: position and pressure - Controller dimensions: approx. 600 x 30 x 30 mm (with hood on right edge) - Eurorack format - Width: 8 HP - Depth: 40 mm - Power requirement: 40mA ( 12V) / -20mA (-12V) |
|
| Doepfer : A-178 Theremin
(23 comments)
Theremin Module- Produces variable control voltage when hand is moved around the antenna -...(+) Theremin Module- Produces variable control voltage when hand is moved around the antenna - Range approx. 30 cm - Maximum output voltage: 10V - Euro rack format - Power requirements: 60 MA ( 12 V) / 20 mA -12 V) - Width: 8 HP / 40.3 mm - Depth: 40 mm (measured from the rear of the front panel) |
|
| Doepfer : A-174-4 3D Joystick
Doepfer A-174-4 3D Joystick; Eurorack module; Joystick with X/Y axis, rotating Z axis cont...(+) Doepfer A-174-4 3D Joystick; Eurorack module; Joystick with X/Y axis, rotating Z axis control and Gate button; spring-loaded X, Y an Z axis; CV outputs for X, Y and Z as non-inverted and inverted version (range: -5V to +5V); CV offset control for each axis; 4 quadrant CV outputs (Q1-Q4) with controllable overlap (range: 0V to +10V); Gate output; power consumption: 50mA (+12V) / 20mA (-12V); width: 12 HP; depth: 50mm; Joystick heigth: 70mm |
|
| Robaux : 3PT
(2 comments)
Robaux 3PT; Eurorack module; 3-channel Multimode Controller; three trimpots for each chann...(+) Robaux 3PT; Eurorack module; 3-channel Multimode Controller; three trimpots for each channel to define Minimum, Offset and Maximum values; CV control knob with LED rings to control all three channels simultaniously (also via CV input); 7 selectable modes: Mactro Controller, 3-channel LFO, Chord Generator, Quantizer, Random Generator, Sequencer and Euclidean Pattern Generator; power consumtion: 20mA (+12V) / 0mA (-12V); width: 10 HP; depth: 25mm |
|
| Polyend : Preset
Polyend preset; for organizing and controlling previously created patterns; 9 freely confi...(+) Polyend preset; for organizing and controlling previously created patterns; 9 freely configurable outputs for notes (1V/Oct), control voltage (0-10V) and CV signals; up to 30 seconds live automation per CV signal; 9 illuminated push encoders for operating the outputs; 32 backlit pads; 32 pattern slots on 32 banks (1024 memory locations in total); CV input for clock signals; sequencer; width: 22 TE / HP; depth 24 mm; current: 170 mA (+12V) / 11 mA (-12V) |
|
| Doepfer : A-174-4 3D Joystick VE
Doepfer A-174-4 3D Joystick VE; Eurorack module; Vintage Edition with black front panel; J...(+) Doepfer A-174-4 3D Joystick VE; Eurorack module; Vintage Edition with black front panel; Joystick with X/Y axis, rotating Z axis control and Gate button; spring-loaded X, Y an Z axis; CV outputs for X, Y and Z as non-inverted and inverted version (range: -5V to +5V); CV offset control for each axis; 4 quadrant CV outputs (Q1-Q4) with controllable overlap (range: 0V to +10V); Gate output; power consumption: 50mA (+12V) / 20mA (-12V); width: 12 HP; depth: 50mm; Joystick heigth: 70mm |
|
| Intellijel Designs : Tetrapad
Multi-Dimensional Performance Touch Controller- Responds to the vertical position of the f...(+) Multi-Dimensional Performance Touch Controller- Responds to the vertical position of the finger and the applied pressure - Can be configured in different modes - The selected mode determines which type of signal (CV, note, trigger, gate, etc.) is sent from each of the eight independent outputs - Multi-colour LEDs for control - Width: 20 TE / HP - Depth: 19 mm - Power requirement: 130 mA ( 12 V) / -15 mA (-12 V) |
|
| Behringer : 992 Control Voltages
Behringer 992 Control Voltages; Eurorack module; utility-module for mixing 4 CV inputs to ...(+) Behringer 992 Control Voltages; Eurorack module; utility-module for mixing 4 CV inputs to 3 parallel outputs; inputs 1-3 at unity gain, input 4 with bi-polar attenuverter; on/off switch for each input; power consumption: 10mA (+12V) / 10mA (-12V); width: 8 HP; depth: 35mm |
|
| Behringer : CP3A-O OSC Controller
(2 comments)
Behringer CP3A-O OSC controller; Eurorack module; 4 CV inputs; CV input 4 with attenuator;...(+) Behringer CP3A-O OSC controller; Eurorack module; 4 CV inputs; CV input 4 with attenuator; 4 switches to switch and sum CV signals; 3 CV outputs with identical signal; width: 8 HP; current consumption: 5 mA (+12 V) / 5 mA (-12 V) |
|
| ADDAC : 503 Marble Physics
ADDAC 503 Marble Physics; Eurorack module; CV generator based on the mechanics behavior of...(+) ADDAC 503 Marble Physics; Eurorack module; CV generator based on the mechanics behavior of a marble on a tray; the virtual marble can be influenced by 5 parameters with manual controls: movement on X and Y axis, speed, bouncing behaviour when hitting the elastic walls, strenghts of a bump; CV inputs for all parameters; CV outputs for X nd Y position, Velocity and Bounce; power consumption: 80mA (+12V) / 40mA (-12V); width: 10 HP; depth: 52mm |
|
| Doepfer : A-173-1/2
(5 comments)
Micro Keyboard- Module combination outputs the manually generated 1V / octave control volt...(+) Micro Keyboard- Module combination outputs the manually generated 1V / octave control voltage and up to 15 different gate and trigger signals - "Send" module A-173-1 with 18 keys and octave switch - "Receive" module A-173-2 with 15 gate / trigger outputs, 1V / octave compatible CV output and normal gate output - Outputs individually switchable between gate or toggle mode - Learn Function allows you to decouple individual keys from the CV path - Width: 2 x 6 HP - Depth: 45 mm - Power requirement: 100 mA ( 12 V) / -10 mA (-12 V) |
|
| ADDAC : 304 Manual Gates
(2 comments)
ADDAC 304 Manual Gates; Eurorack module; 8 switches for creating manual gate signals (+5V)...(+) ADDAC 304 Manual Gates; Eurorack module; 8 switches for creating manual gate signals (+5V); 4 of the 8 channels offer a signal input and can be used as momentary switches; power consumption: 10mA (+12V) / 10mA (-12V); width: 8 HP; depth: 25mm |
|
| ADDAC : 307 Heart Sensing
ADDAC 307 Heart Sensing; Eurorack module; generates a Gate signal and AD-Envelope from the...(+) ADDAC 307 Heart Sensing; Eurorack module; generates a Gate signal and AD-Envelope from the users heartbeat; manual controls for Attack, Decay, Amplitude and Offset; positive and inverted Envelope outputs; Trigger output; Sensor input; includes a clip-on sensor for attachment to a finger or an earlobe; power consumption: 60mA (+12V) / 10mA (-12V); width: 4 HP; depth: 35mm |
|
| ADDAC : 306 VC Transitions
ADDAC 306 VC Transitions; Eurorack module; 5-channel CV source & Patch-Controller; definab...(+) ADDAC 306 VC Transitions; Eurorack module; 5-channel CV source & Patch-Controller; definable voltage range per channel via "Minimum" and "Span" (Offset to Minimum) controls; voltage transition selectable per channel (minimum to maximum or vice versa); Transition-Slider controls the CV output of all 5 channels at once; output-voltage per channel selectable between +5V or +10V; CV input for Transition-Controller; 5 CV outputs; power consumption: 40mA (+12v) / 20mA (+12V); width: 8 HP; depth: 40mm |
|
| Doepfer : A-174-2
(3 comments)
Module- With two modulation wheels - The factory setting is a spring loaded wheel on the l...(+) Module- With two modulation wheels - The factory setting is a spring loaded wheel on the left side with bipolar voltage output (i.e. 0V in the centre position, positive voltage in the upper range, negative voltage in the lower range; voltage range approx. -5.5 V ... 0 V ... 5.5 V) - The wheel to the right side is without spring and has a positive voltage output (i.e. 0V in the lowest position and positive voltage when operated upwards; voltage range approx. 0... 8 V) - For the spring loaded wheel a voltage "plateau" around 0 V is the preset, so the output voltage is always 0 V in a small range near to the centre position - Width: 14 HP - Depth: 40 mm - Power requirement: 10 mA ( 12 V) / -10 mA (-12 V) |
|
SYNTHESIZER KEYBOARD
