| Violectric : HPA V550 Pro
(2 comments)
- With 256-step relays for even finer tuning of volume levels- With remote control for vol...(+) - With 256-step relays for even finer tuning of volume levels- With remote control for volume, mute, input selection, resampling and output selection- Motorised volume control- Balance control- 3 Analogue stereo inputs: 2x Cinch unbalanced, 1x XLR balanced- Pre-gain +/-18 dB for optimal adaptation to source and headphones- 4 Powerful amplifiers, 6400 mW Pmax at 50 Ohm, 21V RMS at 600 Ohm- Monitoring of headphone outputs for DC voltage and overload- Headphone and line-out paths can be selected separately- Headphone outputs: 1x jack 6.3 mm, unbalanced, 1x XLR 4-pin balanced- 1x Pentaconn (4.4 mm, balanced)- Line outputs: 1x RCA L/R unbalanced, 1x XLR L/R balanced- Line-out +/- 18dB signal adjustment to follow-on units- 2 Toroidal transformers- Dimensions (W x H x D): 290 x 80 x 248 mm- Weight: approx. 6 kg- Colour: Black- Incl. a remote control and mains cable |
|
| Violectric : HPA V222
(1 comments)
- Balanced headphone amplifier with 4 output stages- 50 Volts internal operating voltage -...(+) - Balanced headphone amplifier with 4 output stages- 50 Volts internal operating voltage - ideal for high-impedance headphones- High output power, for headphones with low impedances and magnetostats- +/- 18 dB pre-gain- 3500 mW Pmax at 50 Ohm- > 23 V RMS into 600 Ohm- Volume control with RK 27 potentiometer- Large 38 mm all-aluminium knob- Delayed switching of headphones after power-on- Integrated power supply- 2 Line inputs: XLR (L/R)- 2 Line inputs: RCA (L/R)- 1 Stereo headphone output: 4.4 mm Pentaconn balanced- 1 Stereo headphone output: 4-pin XLR balanced- 1 Stereo headphone output: 6.3 mm jack unbalanced- Dimensions (W x H x D): 170 x 65 x 252 mm- Weight: 3.1 kg |
|
| SPL : Phonitor xe black
(1 comments)
- Suitable for headphones with a jack plug and balanced headphones with a 4-pin XLR plug- ...(+) - Suitable for headphones with a jack plug and balanced headphones with a 4-pin XLR plug- 2 VU meters for left and right audio channels- Laterality regulation for detailed balancing- MODE switch for mono / stereo switching- With Phonitor Matrix for fatigue-free listening- Crossfeed control for level and frequency adjustment of the left and right audio channels- Angle control for determining the interaural time difference- Analog inputs: 2x XLR (female, balanced), 2x RCA (unbalanced)- Headphone output: 1x TRS (6.3 mm jack), 1x XLR (4-pin RCA)- Output power (TRS): 2x 5 W (at 250 Ohm)- Dynamic range (TRS): 135.5 dB- Output power (4-pin XLR): 2x 3.5 W (at 250 Ohm)- Dynamic range (4-pin XLR): 130.5 dB- Frequency range: 10Hz - 300kHz (-3dB)- THD + N (10Hz - 22kHz, 0dBu): 0.00082%- Linear power supply with toroidal transformer- Power consumption: max. 40VA- Stand-by power consumption: |
|
| Behringer : Amp800 V2
- For studio and live applications- 6-Band LED meter per channel for inputs and outputs- V...(+) - For studio and live applications- 6-Band LED meter per channel for inputs and outputs- Volume control per channel- Balance and volume control for line inputs- Max. 8 headphones can be connected simultaneously- Several Behringer Amp800 V2 cascadable- Dimensions (HxWxD): approx. 48 x 242.6 x 120 mm- Weight: approx. 0.77 kg- Incl. external power supply DC 12V / 1A- 4 Line inputs (2x L/R stereo): 6.3 mm jack- 8 Stereo headphone outputs (4x front, 4x rear): 6.3 mm jack- 2 Link outputs (1x L/R stereo): 6.3 mm jack |
|
| Rupert Neve Designs : RNHP
(25 comments)
- Based on the headphone amplifier section of the Rupert Neve Designs 5060 Centerpiece- Th...(+) - Based on the headphone amplifier section of the Rupert Neve Designs 5060 Centerpiece- Three switchable inputs (XLR, RCA, mini-jack)- Solid steel housing- Output impedance: 0.08 Ohm at 1KHz- Frequency response: +/- 0.2 dB from 10 to 12,0000 Hz- Power supply: 24 V via an external 6 Watt power supply unit (included in the scope of delivery)- Dimensions (W x D x H): 165 x 117 x 48 mm |
|
| Millenium : HP4
(554 comments)
- 4x Independent stereo inputs with unsymmetrical jack sockets- Separate volume control fo...(+) - 4x Independent stereo inputs with unsymmetrical jack sockets- Separate volume control for every channel- Easily expandable - Up to 4 devices can be operated together- Shielded internal double-regulated power supply with voltage selector for 115V / 60Hz or 230V / 50Hz- Design: 19", 1 U |
|
| Tascam : MH-8
(25 comments)
- 2 Stereo inputs can be assigned to each of the headphone channels- Input 1: XLR/Jack bal...(+) - 2 Stereo inputs can be assigned to each of the headphone channels- Input 1: XLR/Jack balanced; Input 2: XLR balanced / RCA connector unbalanced- Input level control, signal- and overload indicator on both inputs- Additional, switchable direct input (jack, balanced) on every headphone channel (left input usable for mono signals)- High output power (2x 250 mW for each headphone pair)- Level control, signal- and overload indicator on every headphone channel- Every channel can be switched to mono- Additional output allows looping through of stereo inputs 1 and 2 to other devices- Ground terminal and ground lift switch- Easily replaceable fuse- Dimensions: 482 x 44 x 280 mm- Weight: 3 kg |
|
| Mackie : HM-4
(101 comments)
- Share a single stereo source with up to 4 headphone pairs- 1 x 6.3 mm jack stereo input ...(+) - Share a single stereo source with up to 4 headphone pairs- 1 x 6.3 mm jack stereo input and 4x 6.3 mm jack stereo outputs with individual volume controls- Dimensions: 51 x 109 x 58 mm- Weight: 200 g- Includes 12V power supply |
|
| SPL : Phonitor 3 DAC
(1 comments)
- 6 Digital & analogue stereo inputs: 2x XLR stereo, USB, S/PDIF (coaxial), S/PDIF (optica...(+) - 6 Digital & analogue stereo inputs: 2x XLR stereo, USB, S/PDIF (coaxial), S/PDIF (optical) and ES/EBU (XLR)- Output switch for easy switching from headphone to speaker playback, plus mute function in the centre position- DAC converter: 32 bit, up to 768 kHz- Support for DSD files up to DSD256- Phonitor matrix with crossfeed speaker Angle and Centre Level- Mono/stereo- Laterality control: shifts the stereo image to the left or right to centre the stereo on the monitor side- Solo L/R- Phase inversion for L and R- L/R swap- 120V technology- Headphone output can be boosted by 12 dB via DIP switch on the rear panel- Phonitor matrix can be output to preamp out- Fully-fledged monitor controller- Output power headphone output (1 kHz, 1% THD, 250 O): 2x 5 W- Frequency range: 10 - 100,000 Hz- Dynamic range: 134.5 dB- Dimensions (W x H x D): 278 x 100 x 300 mm- Weight: 4.15 kg |
|
| Violectric : DHA V226
(1 comments)
- Cirrus 32-bit CS43131 converter with dynamic range of 130 dB and THD+N of -115 dB- Suppo...(+) - Cirrus 32-bit CS43131 converter with dynamic range of 130 dB and THD+N of -115 dB- Supports PCM signals up to 32 bit and 384 kHz and DSD 256- 4 Powerful amplifiers- 3500 mW Pmax into 100 ohms- 23 V RMS into 600 ohms- Delayed connection of the headphones after power-on- Volume control with RK 27 potentiometer- Large 38 mm all-aluminium knob- 50 V Internal operating voltage, ideal for high-impedance headphones- 4 Line inputs: Cinch (2 x stereo)- 2 Line outputs cinch (1 x stereo)- Headphone outputs: 1 x 4-pin XLR balanced, 1 x Pentaconn balanced and 1 x 6-3 mm jack unbalanced- USB-C- Dimensions (W x H x D): 165 x 54 x 228 mm- Weight: 3 kg |
|
| ART : Headamp 6 Pro
(194 comments)
- Bass and treble separately adjustable- 8-Segment LED chains for each channel and bus- XL...(+) - Bass and treble separately adjustable- 8-Segment LED chains for each channel and bus- XLR and jack inputs are 6.3 mm balanced- Headphone outputs front and back- Aux input- Format: 19", 1U |
|
| LD Systems : HPA 4
(332 comments)
- 4 Adjustable headphone outputs- 6.3 mm Stereo jack connectors- RCA L / R and 6.3 mm jack...(+) - 4 Adjustable headphone outputs- 6.3 mm Stereo jack connectors- RCA L / R and 6.3 mm jack input- Switchable mono stereo- Operates with external DC power supply- Max. output power: 4x 100 mW- Input impedance: 1 kOhm- Incl. 24 V DC power supply |
|
| Violectric : HPA V550
(7 comments)
- With remote control for volume, mute, input selection, resampling and output selection- ...(+) - With remote control for volume, mute, input selection, resampling and output selection- Motorised volume control- Balance control- 3 Analog stereo inputs: 2x RCA (unbalanced), 1x XLR (balanced)- 18 +/- dB pre-gain for optimal adaptation to source and headphones- 4 Powerful amplifiers, 6400 mW Pmax at 50 Ohm, 21 V RMS at 600 Ohm- Monitoring of the headphone outputs for DC voltage and overload- Headphone and line-out can be selected separately- Headphone outputs: 1x jack (6.3 mm, unbalanced), 1x XLR (4-pin balanced), 1x Pentaconn (4.4 mm, balanced)- Line Outs: 1x RCA L / R (unbalanced), 1x XLR L / R (balanced)- 18 +/- dB line-out signal adjustment to downstream devices- 2 Toroidal transformers- Dimensions (W x H x D): 290 x 80 x 248 mm- Weight: approx. 6 kg- Colour: Black- Includes remote control and power cord |
|
| IMG Stageline : HPR-6
(5 comments)
- Can also be used as a small power amplifier for 4-8 Ohm speaker systems- Stereo RCA inpu...(+) - Can also be used as a small power amplifier for 4-8 Ohm speaker systems- Stereo RCA input- 6.3 mm stereo jack output- Volume and balance controls- Metal housing- Frequency range: 19 - 40,000 Hz- Input signal: 110 mV - 4 V- Output signals: 2x 525 mW / 2x 1500 mW / 4 Ohm, 2x 330 mW / 2x 750 mW / 8 Ohm, 2x 114 mW / 2x 200 mW / 32 Ohm- Signal to noise ratio: 69 dB- Distortion factor 1%- Power supply via enclosed plug-in power supply- Dimensions: 120 x 68 x 36 mm- Weight: 288 g |
|
| Behringer : HA6000
(119 comments)
- Professional headphone amplifier system for stage and studio applications- 6 Independent...(+) - Professional headphone amplifier system for stage and studio applications- 6 Independent stereo high power amplifiers in 1U- 6 Direct aux inputs- High and low EQ per channel for perfect sound matching- Output level control with LED output counter per channel- Mono / stereo switch per channel- 6.3 mm Headphone output on front and back- "Planet Earth" switching power supply for maximum flexibility (100 - 240 V ~)- Type: 19", 1 U |
|
| Behringer : HA400
(1745 comments)
- Separate volume control for each channel- 1 Input with 6.3 mm stereo jack- Input impedan...(+) - Separate volume control for each channel- 1 Input with 6.3 mm stereo jack- Input impedance 100 kOhm- 4 outputs with 6.3 mm stereo jacks- Output impedance 80 Ohm- Dimensions (W x H x D): 103 x 47 x 57 mm- 12 Volt power supply included |
|
| SPL : Phonitor xe black + DAC768
(1 comments)
- Suitable for headphones with a jack plug and balanced headphones with a 4-pin XLR plug- ...(+) - Suitable for headphones with a jack plug and balanced headphones with a 4-pin XLR plug- Offers the option of integrating up to 6 stereo sources: XLR, RCA, USB, Coax, Optical and AES / EBU- AKM converter chip for high sound details- 32-Bit resolution and up to 768kHz sampling rate- Direct Stream Digital up to a resolution of DSD4 or DSD256- 2 VU meters for left and right audio channels- Laterality regulation for detailed balancing- MODE switch for mono / stereo switching- With Phonitor Matrix for fatigue-free listening- Crossfeed control for level and frequency adjustment of the left and right audio channels- Angle control for determining the interaural time difference- Analog inputs: 2x XLR (female, balanced), 2x RCA (unbalanced)- Digital inputs: 1x AES / EBU (XLR), 1x coaxial SPDIF (RCA), 1x optical SPDIF (Toslink), 1x USB (B)- Headphone output: 1x TRS (6.3 mm jack), 1x XLR (4-pin balanced)- Output power (TRS): 2x 5 W (at 250 Ohm)- Dynamic range (TRS): 135.5 dB- Output power (4-pin XLR): 2x 3.5 W (at 250 Ohm)- Dynamic range (4-pin XLR): 130.5 dB- Frequency range: 10Hz - 300kHz (-3dB)- THD + N (10Hz - 22kHz, 0dBu): 0.00082%- Linear power supply with toroidal transformer- Power consumption: max. 40VA- Stand-by power consumption: |
|
| Sonifex : Redbox RB-HD6
- The HD6 can distribute a stereo input signal to up to six different headphones, each wit...(+) - The HD6 can distribute a stereo input signal to up to six different headphones, each with its own volume control on the front- Each headphone path has an additional input- If this is used, the corresponding path is disconnected from the master audio signal- The master level can be used to control the common level. A stereo / mono switch adds the left and right outputs for mono operation. |
|
| ART : HeadTAP
(18 comments)
- Input to hook up the PA or the monitor amplifier- Adjustable headphone output- Fast and ...(+) - Input to hook up the PA or the monitor amplifier- Adjustable headphone output- Fast and reliable way to operate headphones as a monitor replacement on a PA |
|
| Rolls : HA 43 Pro
- Stereo input- Four separate outputs- Separate level adjusters- Inputs and outputs 6.3 mm...(+) - Stereo input- Four separate outputs- Separate level adjusters- Inputs and outputs 6.3 mm TRS jack- Power supply PS-27 included |
|
