| Harley Benton : PA-100 Power Attenuator (543 comments)
Useful tool for rehearsal room, live and recording applications- Tube amplifiers as they s...(+) Useful tool for rehearsal room, live and recording applications- Tube amplifiers as they sound best - high output level with reduced and controlled volume- Can also be used as a dummy load- Input power up to 100W- LED with overload indicator- Quiet fan- Controls: Speaker Level and Line Level- Inputs: 4/8/16 Ohm- Balanced speaker output- XLR DI output with speaker simulation- Dimensions: (W x H x D) 190 x 110 x 140 cm- Weight: 1.5 kg |
|
| Universal Audio : OX Amp Top Box (133 comments)
Analogue reactive loadbox for guitar tube amplifiers- Five tuned guitar amp attenuation le...(+) Analogue reactive loadbox for guitar tube amplifiers- Five tuned guitar amp attenuation levels- Rig control for pre-set microphone and speaker box emulations- UA Dynamic Speaker Modelling accurately models the behaviour of a speaker and membrane resonances- Integrated UA EQ compression, delay and reverb effects- Ohm operation selectable (4, 8, and 16 Ohm)- Max. power handling: 150 W- Connectors: Line output 6.3 mm jack balanced- S/PDIF output- Headphone output: 6.3 mm jack- Pairing via WiFi with OX mobile or desktop app to edit and save presets (for Windows 10 and macOS: Sierra or High Sierra)- Suitable cases: Article Nr. 469012 and 505416 (both not included) |
|
| Fryette : Power Station 100 (13 comments)
Easy-to-use power attenuator for volume control of high-performance tube amplifiers withou...(+) Easy-to-use power attenuator for volume control of high-performance tube amplifiers without the disadvantages of a conventional attenuator- Two remote-controlled, foot-switchable controls on the front for volume, presence and depth for maximum flexibility during live performances- Powerful mono block with 100 W from 2x 6550 tubes for incomparable response and dynamic range- Active safety bypass function deactivates the internal power amplifier and maintains the critical load of the amplifier if the loudspeaker output socket is accidentally unplugged- Output power: 100 watts at 2/4, 8 and 16 ohms- Tubes: 1 x 12AX7, 2 x 6550- Power consumption (max.continuous): 200 W @ 2/4 Ohm, 150 W @ 8 Ohm, 200 W @ 16 Ohm- Channel A slider: Volume, Presence & Depth- Channel B slider: Volume, Presence & Depth- Balanced line output with level control: XLR- Unbalanced line output 6.3 mm jack- FX Send & Return: 2x 6.3 mm jack- Speaker output: 6.3 mm jack- Remote foot switch socket: 6.3 mm stereo jack- Dimensions (W x H x D): 355 x 91 x 228 mm height with feet / 355 x 70 x 228 mm height without feet- Weight: 7.3 kg- Channel A / B- Hi / Lo input level- Treble Response (Flat / Brite / Edge)- Low Frequency Response (Presence / Bass)- Bypass (standby)- Amplifier impedance: 2/4, 8 or 16 ohms- FX level Hi / Lo- Speaker impedance: 2/4, 8 or 16 ohms- Ground lift- Balanced line output with level control (XLR)- Unbalanced line output 6.3 mm jack- FX-Send & return (2 x 6.3 mm jack)- Speaker output (6.3 mm jack)- Remote footswitch (6.3 mm stereo jack)- Dimensions (W x H x D): 355 x 91x 228 mm- Weight: 7.3 kg |
|
| Tone King : Ironman II Attenuator (14 comments)
Full tube compression at room volume- Reactive Load Technology preserves the tone and dyna...(+) Full tube compression at room volume- Reactive Load Technology preserves the tone and dynamics of the amp- Footswitchable 3 dB / 6 dB solo function- 6-Level damping provides volume settings for every performance, session or home- 3-Position presence switch tames unwanted highs- XLR DI Out with Speaker Simulation- Power rating: 100 W RMS- Can be used as a dummy load to provide a correct load for your amplifier without speakers being connected- Impedance: 4, 8 or 16 ohms- Control: Attenuation- Switches: Range Hi / Lo, Solo On / Off, Presence 0 / -3db / -6dB, Impedance, DI Level -10 / -30 dB, Axis Cone / Edge, Ground Lift- LED: Solo On- Dimensions (W x D x H): 241 x 260 x 95 mm- Weight: 6.8 kg- Includes 12 V DC power supply and foot switch (solo on / off)- Made in USA- Amplifier input: 6.3 mm jack- Speaker output: 2x 6.3 mm jack- Line Out: 6.3 mm jack- Line Out: 6.3 mm jack- DI Out: XLR- Solo footswitch connection: 6.3 mm jack- Power supply connection: coaxial connection 5.5 x 2.1 mm, negative polarity inside |
|
| Harley Benton : PA-250 Power Attenuator
Allows playing a tube amp with high output level for optimal performance, but with reduced...(+) Allows playing a tube amp with high output level for optimal performance, but with reduced volume- Can be used as a dummy load- Useful tool for rehearsal, live performance and direct recording- Does not affect the original character and feel of the amp- 6 Levels of power reduction- "Fine" control for the -15dB option- Input power up to 250 W- LED for overload function- Integrated low-noise fan cooling- 8/16-Ohm option- Loudspeaker output- Line output with adjustable level control- Low impedance XLR DI output- Works without power supply, but aux power option can be used to keep fan and light stable independent of amplifier power supply- Dimensions (W x D x H): 235 x 178 x 88 mm- Weight: 2.67 kg |
|
| Bugera : PS1 Power Soak (298 comments)
Passive- Input: Maximum 100W- 3 Inputs with different impedances (4, 8 and 16 ohms), thus ...(+) Passive- Input: Maximum 100W- 3 Inputs with different impedances (4, 8 and 16 ohms), thus usable with almost all amps- Speaker output- Emulated XLR microphone output- Line output with volume control |
|
| Tone King : Ironman II Mini Attenuator (43 comments)
Drive your tubes to their limits at bedroom volume- With Reactive Load technology, it main...(+) Drive your tubes to their limits at bedroom volume- With Reactive Load technology, it maintains the tone and dynamics of your rig- Foot-switchable 3dB / 6dB solo function- For amplifiers with a maximum power of 30 W- 6-Level attenuation offers volume settings for any performance, session or jam- 3-Position presence switch tames unwanted trebles- Controls: Attenuation- Switch: Range Hi/Lo - Presence 0/-3 dB/-6 dB- LED: Solo on- Impedance: 8 Ohm- Footswitch: Solo- Amplifier input: 6.3 mm jack- Speaker output: 6.3 mm jack- Line out: 6.3 mm jack- Power adapter connector (coaxial socket 5.5 x 2.1 mm - negative pole inside)- Power supply (only for the LED) via two AA batteries or a 9 V DC power supply (not included, suitable power supply available under article no. 409939)- True bypass- Dimensions (W x D x H): 191 x 203 x 76 mm- Weight: 1.36 kg- Made in USA |
|
| Palmer Mi : Supreme Soaker
Reactive power reducer and load box with a finely tuned analogue speaker simulator- Enable...(+) Reactive power reducer and load box with a finely tuned analogue speaker simulator- Enables the sweet spot of the amplifier to be used at any volume and even without a speaker for silent practice or recording- 6 Sound settings for the speaker- 6 Sound settings for the line out- Controls: Speaker Attn, line EQ, speaker tone, mic in gain and tone, line out level and bland, aux in level, phones level- Push buttons: Amp to line out pre/post and tone hard/soft, ground lift- Switches: Line out FX loop dry/wet, re-amp out FX loop dry/wet, FX level pro/inst, mic pad, phase and 48 V phantom power on/off, speaker impedance 8/16 ohms- LED: Input level, output level, mic signal peak- Impedance: 8 or 16 ohms- Stereo aux input- Amplifier input: 6.3 mm jack- Headphone output- Speaker outputs: 2 x 6.3 mm jack- Line output: 6.3 mm jack- DI output: XLR- Solo footswitch: 6.3 mm jack- Power consumption: 1500 mA- Power supply via 9 V DC power supply unit (2.1 x 5.5 mm coaxial socket, centre negative) (included)- Dimensions (W x D x H): 334 x 274 x 108 mm- Weight: 6.6 kg- Made in Germany |
|
| Tube Amp Doctor : Silencer 16 Ohms Black (54 comments)
Is connected between amplifier box output and loudspeakers- Max. power rating: 150 W- Impe...(+) Is connected between amplifier box output and loudspeakers- Max. power rating: 150 W- Impedance: 16 Ohm- Attenuation steps from -2 dB to - 16 dB in 2 dB steps- Continuous "Fine" control- BITE and PUNCH boost switches- LOAD-BOX operation possible without loudspeakers- Adjustable LINE-Out- F.A.N.T.A. out Speaker emulation, low impedance, balanced- Dimensions: 245 x 120 x 200 mm- Weight: approx. 2.5 kg- Colour: Black- Made in Germany |
|
| Boss : WAZA Tube Amp Expander (15 comments)
Modern, variable reactive attenuator circuit for tube amplifiers up to 150 W- Impedance se...(+) Modern, variable reactive attenuator circuit for tube amplifiers up to 150 W- Impedance settings for properly adjusting the load resistance of the amplifier- Preserves the natural sound, the dynamic feel and the individual character of the distortion- 10 Memory slots- Versatile parameters controlled via GA-FC / FS foot pedals and MIDI- Integrated 100 W Class AB power amplifier with discrete analogue design and seamless volume control- Powerful DSP section- Customisable stereo effects: Compressor, Delay, Reverb and four EQs- 22 Speaker-box emulations with five selectable close mic and three surround microphone types plus four slots for uploading your own speaker impulse responses- External effect loop with selectable serial / parallel operation and control input for switching the amplifier channels- Parallel speaker output for connecting two speakers for live use- Balanced XLR line outputs (mono and L / R stereo) for connecting a FOH mixing console, stage monitors and recorders- Headphone output for quiet practice with fully turned up amplifier sounds- Editor software (Mac / Windows)- USB for direct audio recording and communication with the editor software- Controls: Speaker Out, Line Out, Phones, Resonance Z, Presence Z, Rig, Reverb- Buttons: Fx Loop, Effects, Solo / EQ, Amp Ctl- Switches: Speaker Impedance, Input Level, L / R Gnd Lift, Mono (Foh) Gnd Lift, Loop, Level, Send Gnd Lift, Return Gnd Lift, Amp Ctl- LED: Power, Write, FX Loop, Effects, Solo / EQ, Amp Ctl, Input Sig / Peak, Footswitch:- Dimensions (W x D x H): 381 x 297 x 111 mm- Weight: 6.8 kg- From tube amplifier: 6.3 mm jack- Speaker Out A&B: 6.3 mm jack- Line out L/R: XLR- Line out mono: XLR- Headphones: 6.3 mm stereo jack- Send: 6.3 mm jack- Return: 6.3 mm jack- FX loop: 6.3 mm jack- GA-FC: 6.3 mm stereo jack- Amp Ctl: 6.3 mm jack- USB B port- MIDI: In, Thru / Out |
|
| Palmer : PDI-06-16 Ohm (49 comments)
Format: 9.5''/ 1 RU- Adjustable in 6 steps (100%, 70%, 50%, 35%, 25%, 18%)- Reduces the vo...(+) Format: 9.5''/ 1 RU- Adjustable in 6 steps (100%, 70%, 50%, 35%, 25%, 18%)- Reduces the volume of a guitar speaker at full saturation of the tubes- Made for 16 Ohm loudspeakers- Bypass/ attenuator switch for fast switching between full and reduced output power- Input: 1x 6.3 mm jack socket- Output for loudspeaker 1x 6.3 mm jack socket in parallel- Output impedance: 16 Ohm |
|
| Tube Amp Doctor : Silencer 8 Ohms Black (96 comments)
Power Attenuator, Silencer and Load Box- To be connected between the amplifier speaker out...(+) Power Attenuator, Silencer and Load Box- To be connected between the amplifier speaker output and speaker (cabinet)- max. power handling: 150 W- 8 Ohm- 2 db Attenuating steps from -2 db to -16 db- 'Fine' control from -16 db- BITE and PUNCH boost switch- LOAD position operation without speakers possible- Adjustable line out- F.A.N.T.A. -out speaker emulation, low impedance, balanced- Dimensions: 245 x 120 x 200 mm- Weight approx .: 2.5 kg- Colour: Black- Made in Germany |
|
| Fryette : Power Load IR (3 comments)
Variable reactive load box connected to an analog Zero Latency Cab and microphone simulati...(+) Variable reactive load box connected to an analog Zero Latency Cab and microphone simulation and a digital IR loader- Allows silent recording of a tube amplifier- Analog emulation and IR loader can be used individually or simultaneously- Cab simulation can be deactivated to use an external impulse response (IR)- 16 Pre-installed Cab-Sims, which can be modified via the supplied GUI- Additional Cab-Sims can be installed via the USB port on the front- Placed between amp (max. 200W) and box, the signal can be sent directly to the mixer with one or both Cab simulations- High quality headphone amplifier- Amp In with selectable input impedance (4, 8 or 16 ohms)- AUX input with -20dB pad: 6.3 mm jack- Transformer-isolated direct output: XLR and 6.3 mm jack- Output with cab and microphone simulation: XLR and 6.3 mm jack- Headphone connection: 6.3 mm jack- Dimensions: (W x D x H): 222 x 156 x 70 mm- Weight: 3.6 kg |
|
| SPL : Reducer (101 comments)
Choosable Impedance for amp output: 4, 8 or 16 Ohm- Input/output: 6.35 mm mono jack- Dimen...(+) Choosable Impedance for amp output: 4, 8 or 16 Ohm- Input/output: 6.35 mm mono jack- Dimensions (HxWxD): 85 x 208 x 179 mm (incl. feet and switches/ knobs)- Weight: 1.8 kg- 4 Ohm: 90 W RMS/ 120 W peak- 8 Ohm: 200 W RMS/ 260 W peak- 16 Ohm: 160 W RMS/ 180 W peak |
|
| Palmer : PDI-06-8 Ohm (54 comments)
Adjustable in 6 steps (100%, 70%, 50%, 35%, 25%, 18%)- Reduces the volume of a guitar spea...(+) Adjustable in 6 steps (100%, 70%, 50%, 35%, 25%, 18%)- Reduces the volume of a guitar speaker at full saturation of the tubes- Made for 8 Ohm or 2x 16 Ohm loudspeakers- Bypass/ attenuator switch for fast switching between full and reduced output power- Input: 1x 6.3 mm jack socket- Output for loudspeaker 2x 6.3 mm jack socket in parallel- Output impedance: 8 Ohm |
|
| Rivera : RockCrusher (53 comments)
Load Box and attenuation for amplifying power up to 120 W RMS- Natural sound at every volu...(+) Load Box and attenuation for amplifying power up to 120 W RMS- Natural sound at every volume- Impedance: 8 and 16 Ohm selectable- Reactive internal network for true amplifier/ load interaction- High thermal capacity ensures cool running and long life- Tight impedance tolerances- XLR and unbalanced line outputs with level control- Low and high frequency equalization selection- Full bypass capability with no insertion loss |
|
| Rivera : RockCrusher Gold (12 comments)
Power reducer and load resistor for tube amplifiers- Load resistor and power reduction up ...(+) Power reducer and load resistor for tube amplifiers- Load resistor and power reduction up to an amplifier power of 120 W RMS- Natural sound at any volume- Impedance: selectable between 8 and 16 ohms- Reactive internal circuit for real amplifier / load interaction- High heat capacity ensures cool operation and long life- Tight impedance tolerances- XLR and unbalanced line outputs with volume control- Bass and treble sound section selection- Full bypass without losses |
|
| Rivera : RockCrusher Recording (13 comments)
Load Box and attenuation for amplifying power up to 120 W RMS- Analogue speaker simulation...(+) Load Box and attenuation for amplifying power up to 120 W RMS- Analogue speaker simulation- Graphic 11-band EQ- Switch for EQ, input gain and speaker impedance- Natural sound at every volume- Impedance: 8 and 16 Ohm selectable- Reactive internal network for true amplifier/ load interaction- High thermal capacity ensures cool running and long life- Tight impedance tolerances- XLR and unbalanced line outputs with level control- Low and high frequency equalization selection- Full bypass capability with no insertion loss |
|
| Suhr : Reactive Load IR (14 comments)
A simple solution to capture the warmth and dynamics of your sound without the hassle of r...(+) A simple solution to capture the warmth and dynamics of your sound without the hassle of removing a speaker during a performance or studio recording- Is connected in place of the speaker box and provides an 8 ohm load for your tube amp- Creates a balanced and unbalanced signal that can be connected to recording devices, effects and power amplifiers- In addition to the original Suhr Reactive Load, the Reactive Load IR adds impulse response technology that provides quick and easy access to a range of professionally microfoned loudspeakers- 16 Preinstalled impulse responses from Suhr loudspeaker cabinets with Celestion loudspeakers- Third-party impulse responses can be loaded via the USB port- Controls: IR Select, HP Level, DI Level- Switch: Signal 0 / + 6 dB, Hi-Cut- 6.3 mm Jack amplifier input- 6.3 mm Jack thru to speaker connection- 6.3 mm Stereo jack DI / Line Output Un-Filtered- 6.3 mm Stereo jack DI / Line output IR- 3.5 mm Stereo jack headphone output- 3.5 mm Stereo jack aux In- Power adapter connector (female connector 5.5 x 2.1 mm, negative pole inside)- Current consumption: 200 mA- Power supply via 9 V DC power adapter- Recommended maximum amplifier power: 100 Watts RMS- Dimensions (W x D x H): 22.35 x 22.6 x 9.6 cm- Weight: 3 kg- Includes power supply |
|
| Suhr : Reactive Load (18 comments)
Simple solution to take up the warmth and dynamics of your sound without putting microphon...(+) Simple solution to take up the warmth and dynamics of your sound without putting microphones to a speaker during a gig or studio recording- Connected to tube amp instead of loudspeaker and loads it with 8 Ohm- Generates a symmetrical as well as assymmetrical signal (without loudspeaker simulation) to be connected to recording devices, effects and power amps- Recommended max. amp power: 100 Watt RMS- Dimensions (W x D x H): 22.35 x 22.6 x 9.6 cm- Weight: 3 kg |
|