| Enttec : D-Split 2x3pin + 2x5pin output
Lightweight and portable- 1 DMX input: 3-Pin and 5-pin plug for connection to only 1 DMX s...(+) Lightweight and portable- 1 DMX input: 3-Pin and 5-pin plug for connection to only 1 DMX signal- 4 DMX outputs: 2x 3-Pin + 2x 5-pin- All outputs are optically isolated (protected up to 1000 V)- DMX512-1990 compatible- Daisy-chain via input ports without using the output ports- LED indicators for power supply- Inputs: 1 x 3-Pin XLR and 1 x 5-pin XLR- Output: 2 x 3-Pin XLR, 2 x 5-pin XLR- IP protection class: IP20- Input/output protocol: USITT DMX512-1990- Max. number of channels: 512 (1 universe)- Input voltage: 7 - 24 V DC- Max. current: 400 mA- Housing material: ABS plastic- Dimensions: 116 x 87 x 52 mm- Weight: 0.16 kg- Incl. a power supply unit with UK/EU/S/AU adapter, TS35 DIN clip and 2 x fixing screws |
|
| PureLink : HDMI Switch 4:1 HDMI 2.0, 18G (1 comments)
HDMI Switch 4:1 Ultra HDMI 2.0 and HDCP 2.2 compliance- 18G- 4K (60Hz 4:4:4 - 18Gbps)- Aut...(+) HDMI Switch 4:1 Ultra HDMI 2.0 and HDCP 2.2 compliance- 18G- 4K (60Hz 4:4:4 - 18Gbps)- Autoswitch with signal detection- Selection via toggle switch- IR Remote and RS232- Auto EDID management- DVI compatible- With ARC- Full 3D compatible- Includes power supply |
|
| ADJ : D6 Branch DMX-Splitter (38 comments)
Has been specially developed for mobile use. It is easy to mount and disassemble it on tra...(+) Has been specially developed for mobile use. It is easy to mount and disassemble it on traverses or tripods quickly and easily using the fixed hook and loop fasteners. A mounting bracket is included for fixed mounting.- 6-way DMX splitter- 3-pin DMX- 1 x In and 1 x Out at the front- 6 x Out at the back- Optical and electrically isolated DMX jacks- Can be mounted on trusses (hook and loop)- IEC power plug- On / Off switch- 230V AC ~ 50Hz |
|
| Showtec : Truss Booster RDM 1-6 5Pol
Compact solution for splitting and amplifying DMX or RDM signals- Mounting on trusses or t...(+) Compact solution for splitting and amplifying DMX or RDM signals- Mounting on trusses or tubes is via the bracket or via Velcro straps that can be pulled through the 4 slots- A rubber ring on both sides of the sturdy housing makes the booster ideal for mobile applications- Small design for easy truss mounting- DMX / RDM splitter for 6 outputs- Power twist in / out- Supports Remote Device Management (RDM) protocol- Inputs: 5-pin XLR connector- Outputs: 6x 5-pin XLR socket / 1x 5-pin XLR Thru socket- Power supply input: 100 - 240 VAC, 50/60 Hz- Dimensions (L x W x H): 280 x 175 x 210 mm- Weight: 2 kg |
|
| Showtec : DMX Merge (3 comments)
Showtec DMX Merge; The device has 4 modes: HTP / Back-up mode / Merge mode / LTP; DMX inpu...(+) Showtec DMX Merge; The device has 4 modes: HTP / Back-up mode / Merge mode / LTP; DMX input: 3-pin XLR (male) 2x on the front and 2x on the back; DMX output: 3-pin XLR (female) 1x on the front and 1x on the back; Dimensions: 482 x 73 x 44 mm (LxWxH); Weight: 1.15kg; |
|
| Eurolite : Split 6X DMX Splitter
6-Way- For rack mounting- DMX distributor with one input and six outputs- Absolute electri...(+) 6-Way- For rack mounting- DMX distributor with one input and six outputs- Absolute electrical insulation between input and output or output and output- DMX connectors either XLR 3-pin or 5-pin for each channel- Each DMX output has independent driver and data LED- Input and output protected with internal 500 mA fuse- Power supply: 230 V AC, 50 Hz ~- Total power consumption: 35 W- DMX 512 output: 3-Pin or 5-pin XLR chassis connector- Dimensions (L x W x H): 483 x 200 x 50 mm- Weight: 3.5 kg |
|
| Major : DMX-Booster 1in12 RJ45
Amplifies and distributes DMX signals with full RDM support- 12 via optocouplers isolated ...(+) Amplifies and distributes DMX signals with full RDM support- 12 via optocouplers isolated outputs with RJ45 (Ethercon)- Switch for DMX termination- Supply voltage: 100 - 240 V 50/60 Hz- Power consumption: 80 W- Inputs: RJ45 (Ethercon), Power Twist- Outputs: RJ45 (Ethercon), Power Twist- Removable 19" angle- Dimensions: 485 x 44.4 x 182 mm- Weight: 2.4 kg- Includes 1.5 m power cable |
|
| Botex : PDB-4R 3P (10 comments)
Ideal combination for distributing power and DMX signals on stage, in a rack or for fixed ...(+) Ideal combination for distributing power and DMX signals on stage, in a rack or for fixed installations- RDM capable- Robust metal housing- DMX input: XLR 3-pin- 4 DMX outputs: XLR 3-pin- Power input: Power Twist- 4 Power outputs: Power Twist- Power supply: 240 V ~ 50 Hz- Power consumption: 5 Watt- Dimensions: 482 x 47 x 143 mm- Weight: 2.3 kg |
|
| Botex : DD-6 RDM Rigg 5P (1 comments)
For distribution of RDM and DMX signals on stage- Within a rig or for fixed installations-...(+) For distribution of RDM and DMX signals on stage- Within a rig or for fixed installations- Robust metal housing with mounting rail with M10 thread on the top side- Compact and lightweight design ideal for mounting on trusses- DMX input and Thru: XLR 5-pin- 6 DMX outputs: XLR 5-pin- Power input: Power Twist- Power supply: 100 - 240 V ~ 50 / 60 Hz- Power consumption: 5 watts- Dimensions: 122 x 126 x 254 mm- Weight: 1.6 kg |
|
| Swisson : XSP-3B DMX-Splitter Box
Swisson XSP-3B DMX splitter BOX; 3-pin in / out, 5 x 3pol. out; professional DMX splitter ...(+) Swisson XSP-3B DMX splitter BOX; 3-pin in / out, 5 x 3pol. out; professional DMX splitter with optically isolated ports; the DMX signal is regenerated and amplified without changing the DMX protocol timing; Reduces reflection problems; Signal error display; switchable terminating resistor; 1x DMX in (3-pin) to 5 x DMX out (3-pin) + thru (3-pin); Weight: 0.75 kg; Dimensions: 215 x 111 x 45 mm (WxDxH); Type: DMX splitter for truss mounting; Metal case; Connection via fixed cable with open ends; Voltage: 100-240V, 50 / 60Hz; internal power supply: |
|
| Obsidian : RDM 6XL
Obsidian RDM 6XL; 6-way DMX splitter (RDM); buffer amplifier (booster); Optically isolated...(+) Obsidian RDM 6XL; 6-way DMX splitter (RDM); buffer amplifier (booster); Optically isolated DMX outputs; terminating resistor switchable; RDM switchable; LED indicator lights; DMX through output on the back; Inputs & outputs front & rear; Sheet steel housing for optimal EMC shielding; Technical data:; Function: DMX 512-A (RDM) splitter 1 to 6; Protocol: DMX 512-A (RDM); DMX 512 connection: 1x XLR 5-pin male, 7x XLR 5-pin female; Power supply: 90-260V 50-60Hz; Current consumption: 0.5A; Protection class: IP20; Dimensions: 21.5 x 13.9 x 4.4 (1U) cm; Weight: 1kg; |
|
| Botex : DMX Splitter DD-2 RDM (20 comments)
1 DMX input- 2 DMX outputs- Galvanic isolation of the connections- RDM capable- Protocol: ...(+) 1 DMX input- 2 DMX outputs- Galvanic isolation of the connections- RDM capable- Protocol: DMX 512 and RDM- XLR in / out: 3 pin / 5 pin- Voltage: 230V / 50Hz- Safety plug with fixed cable (about 1.3 m)- Dimensions (W x H x D): 220 x 63 x 132 mm- Weight: 1.10 kg |
|
| Eurolite : DMX Power Splitter 4x4 3-Pole (1 comments)
1 Power twist input to 4 outputs, max. 16 A- 1 DMX input to 4 outputs- 1 DMX loop-through ...(+) 1 Power twist input to 4 outputs, max. 16 A- 1 DMX input to 4 outputs- 1 DMX loop-through output- Supports RDM- Switchable RDM filter mode- Switchable terminating resistor- Input and outputs galvanically isolated- Each DMX output with independent driver and status display- Rack mounting 1 U: 19" / 48.3 cm- Power supply: 100-240 V AC, 50/60 Hz- Power consumption: 5 W- Output current: max. 4 x 4 A per channel- DMX input and output: XLR 3-pole- Dimensions (W x D x H): 48.3 x 13.8 x 4.3 cm- Weight: 2.50 kg |
|
| Botex : PDB-4R-TR1 5P (2 comments)
Ideal combination for distributing power and DMX signals on stage, in a rack or for fixed ...(+) Ideal combination for distributing power and DMX signals on stage, in a rack or for fixed installations- RDM capable- Robust metal housing- DMX input: XLR 5-pin- 4 DMX outputs: XLR 5-pin- Power input: Power Twist TR1- 4 Power outputs: Power Twist TR1- Power supply: 240 V ~ 50 Hz- Power consumption: 5 Watt- Dimensions: 482 x 47 x 143 mm- Weight: 2.3 kg |
|
| Enttec : D-Split 4x5pin output
Lightweight and portable- 1 DMX input: 3-pin and 5-pin plug for connecting to only 1 DMX s...(+) Lightweight and portable- 1 DMX input: 3-pin and 5-pin plug for connecting to only 1 DMX signal- 4 DMX outputs: 2x 3-pin + 2x 5-pin- All outputs are optically isolated (protected up to 1000 V)- DMX512-1990 compatible- Daisy-chain via input ports without using the output ports- LED indicators for power supply- Inputs: 1 x 3-pin XLR, 1 x 5-pin XLR- Output: 2 x 3-pin XLR, 2 x 5-pin XLR- IP protection class: IP20- Input/output protocol: USITT DMX512-1990- Max. channels: 512 (1universe)- Input voltage: 7 - 24 VDC- Max. current: 400 mA- Housing material: ABS plastic- Dimensions: 116 x 87 x 52 mm- Weight: 0.16 kg- Incl. a power supply unit with UK/EU/S/AU adapter, TS35 DIN clip and 2 x fixing screws |
|
| Botex : Opto Split Pro 5P
Botex Opto Split Pro 5P; DMX splitter; high quality DMX and RDM splitter for rack or rig m...(+) Botex Opto Split Pro 5P; DMX splitter; high quality DMX and RDM splitter for rack or rig mounting; 8 x 5-pin XLR output; all outputs are galvanically isolated by optocouplers; DMX input and DMX thru at the front; signal and power LED; power input: Seetronic Power Twist TR1; M10 thread for rig mounting; 19" / 1 U, mounting depth: 143mm; weight: 2,5kg |
|
| Botex : Opto Split Pro 3P
Botex Opto Split Pro 3P; DMX splitter; high quality DMX and RDM splitter for rack or rig m...(+) Botex Opto Split Pro 3P; DMX splitter; high quality DMX and RDM splitter for rack or rig mounting; 8 x 3-pin XLR output; all outputs are galvanically isolated by optocouplers; DMX input and DMX thru at the front; signal and power LED; power input: Seetronic Power Twist TR1; M10 thread for rig mounting; 19" / 1 U, mounting depth: 143mm; weight: 2,5kg |
|
| Enttec : DIN RDS4 (1 comments)
1 DMX/RDM input- 4 DMX/RDM outputs- 1500 V opto-isolation between each DMX port to protect...(+) 1 DMX/RDM input- 4 DMX/RDM outputs- 1500 V opto-isolation between each DMX port to protect against stray voltages on the DMX line- Front-facing LED status indicator to show current DMX/RDM traffic- Supported protocols: DMX512-A and ANSI E1.20 RDM- Surface or TS35 top-hat rail mounting- Max. 512 channels- Voltage input: 7 - 24 V DC- Dimensions: 100.5 x 72.25 x 34 mm- Weight: 100 g |
|
| Showtec : Truss Booster RDM 1-6 3Pol (1 comments)
Compact solution for splitting and amplifying DMX or RDM signals- It is attached to trusse...(+) Compact solution for splitting and amplifying DMX or RDM signals- It is attached to trusses or pipes using the bracket or hook and loop fasteners that can be pulled through the 4 slots- A rubber ring on both sides of the stable housing makes the booster- Ideal for mobile applications- Small design for easy truss mounting- DMX / RDM splitter for 6 outputs- Power twist in / out- Supports the Remote Device Management (RDM) protocol- Inputs: 5-pin XLR connector- Outputs: 6 x 3-pin XLR socket / 1 x 3-pin XLR thru socket- Power supply input: 100 - 240 VAC, 50/60 Hz- Dimensions (L x W x H): 280 x 175 x 210 mm- Weight: 2 kg |
|
| Rigport : Rigpeater3x3XLR (1 comments)
High quality DMX512 2-line splitter (In|Out1|Out2)- 2 High-performance boosters for up to ...(+) High quality DMX512 2-line splitter (In|Out1|Out2)- 2 High-performance boosters for up to 2x 256 fixtures per line (conventional boosters reach up to 32 fixtures per output)- A Power Twist In- Offers a Rigport Clamp for direct truss mounting (clamp not included in the delivery)- Maximum temperature: 55°C- Maximum current: 100mA- Dimensions: 130 x 55 x 40 mm- Material: Polyamide- Weight: 270g- Includes an integrated wide range power supply (90-264VAC) |
|