| Nux : Melvin Lee Davis Bass Preamp
- Melvin Lee Davis Signature Bass Preamp + DI- Offers sound-shaping controls such as 3-ban...(+) - Melvin Lee Davis Signature Bass Preamp + DI- Offers sound-shaping controls such as 3-band EQ with mid-frequency selection, drive with blend control, speaker simulation (impulse response loader) and integrated noise reduction with decay and threshold controls- 1 Channel- Controls: Volume, Blend, Drive, Bass, Middle, Freq, Treble- Switches: Di, Out, Pre/Post, Lift/Gnd- Input: 6.3 mm jack- AUX input: 3.5 mm jack- Headphone jack: 3.5 mm stereo jack- Through: 6.3 mm jack- Output: 6.3 mm jack- DI Out- Micro USB- Power supply via 9 V DC mains adapter (2.1 mm x 5.5 mm barrel connector, polarity (-) inside, not included in delivery)- Current consumption less than 150 mA- Dimensions (W x D x H): 115 x 105 x 58 mm- Weight: 460 g |
|
| MXR : M 82 Bass Envelope Filter
(146 comments)
- For E-Bass- Classic Analog envelope filter sounds- True bypass- Controller for Dry, FX, ...(+) - For E-Bass- Classic Analog envelope filter sounds- True bypass- Controller for Dry, FX, Decay, Q and Sens. |
|
| EBS : Stanley Clarke Wah
(9 comments)
- Stanley Clarke Signature wah- The pedal runs in four different modes: Low Pass, High Pas...(+) - Stanley Clarke Signature wah- The pedal runs in four different modes: Low Pass, High Pass, Band Pass and Boosted Band Pass- Controls for: Bandwidth and Frequency Range, Wah-Wah / Bypass or Wah / Volume- True bypass |
|
| Aguilar : Fuzzistor
(2 comments)
- Fuzz- Blended, level, tone and fuzz controls- Analogue- True bypass- Can be operated by ...(+) - Fuzz- Blended, level, tone and fuzz controls- Analogue- True bypass- Can be operated by battery and mains (both not included, matching power supply available under Art. 217879) |
|
| MXR : Bass Octave Bundle PS A1
Bundle offer comprising:- Rockboard Pedalsafe Type A1 universal- MXR M288 Bass Octave Delu...(+) Bundle offer comprising:- Rockboard Pedalsafe Type A1 universal- MXR M288 Bass Octave Deluxe |
|
| Harley Benton : Custom Line Bass DI-Expander
(100 comments)
- Active bass preamp / DI pedal with compressor- True bypass- Controls: Gain, Bass, Middle...(+) - Active bass preamp / DI pedal with compressor- True bypass- Controls: Gain, Bass, Middle, Freq, Treble, Blend, Volume, Comp and Threshold DI Switch (Ground / Lift)- Input switch: (0dB / -10dB)- Jack input- Thru jack input (parallel)- Line in- Jack output- Headphone output- Balanced DI output via XLR- Power supply via 9 V battery or 9 V power supply unit (not included, suitable power supply available under Article Nr 409939)- Dimensions (W x D x H): 128 x 93 x 56 mm- Weight: 450 g (without battery) |
|
| Amptweaker : Bass TightFuzz JR Mini
- Bass fuzz- Switchable Silicon / Germanium transistor circuit- Mini version of the TightF...(+) - Bass fuzz- Switchable Silicon / Germanium transistor circuit- Mini version of the TightFuzz- Flexible fuzz tones for bass- From clean germanium sounds to heavy silicon fuzz- Dry low knob to blend with distortion- Electric guitar input impedance works with all effects pedals- Thumbscrew-removable bottom plate for easy access to the battery- True bypass- Controls for: fuzz, tone, volume, and dry low- 3-Way EQ switch (60's / 70's / Now)- 3-Way tight switch: Fat / Normal / Tight- Germanium / Silicon switch- Bypass footswitch- Status LED- Metal housing- 6.3 mm Mono jack input / output- Power supply via 9V battery or optional 9-18V DC power supply (2.1 x 5.5 mm, coaxial power connector, negative polarity (-) inside)- Power consumption: 11 mA for 9V / 15 mA at 18V- Dimensions (W x D x H): 69 x 118 x 51 mm- Weight: 255 g- Handmade in the USA |
|
| MXR : Bass Envelope Bundle PS A1 RB
MXR M 82 Bass Envelope Filter Effect Pedal-
For E-Bass-
Classic Analog envelope filter s...(+) MXR M 82 Bass Envelope Filter Effect Pedal-
For E-Bass-
Classic Analog envelope filter sounds-
True bypass-
Controller for Dry, FX, Decay, Q and Sens. Rockboard Pedalsafe Type A1 Rockboard Protective Cover-
Suitable for Electro Harmonix Nano series and MXR effect pedals with standard housing with 1 input and 1 output jack-
Suitable for most effect pedals with housing dimensions of approx. 110 x 60 x 32 mm-
With base plate for mounting on Rockboard pedalboards with click system-
Distance of QuickMount mounting holes (W x D): 51 x 102 mm-
Protects effect pedals from dirt and weather influences-
Protects settings from unintentional adjustment-
Mounts effect pedals securely on RockBoard pedalboards-
No permanent modifications required-
Includes QuickMount pedal mounting plate type A for RockBoard pedalboards and spare screws |
|
| Boss : BC-1X Bass Compressor
(61 comments)
- Intelligent multiband compression- Intelligent circuit adapts the pitch and style of the...(+) - Intelligent multiband compression- Intelligent circuit adapts the pitch and style of the game, resulting in a natural compression that preserves the fundamental bass sound- 18 Volt input electronics allow enough headroom for clear and powerful sounds without unwanted distortions- Gain Reduction Display shows the exact degree of compression- The digital circuit reduces noise- Controls: Level, Release, Ratio & Threshold- Power supply with 9 V battery or 9 V DC power supply (coaxial connection - minus pole inside, not included in the scope of delivery, matching power supply available under Art.409939)- Measurements: (W x D x H): 70 x 125 x 55 mm |
|
| Kemper : Profiler Stage Bundle 1
Kemper Profiler Stage Kemper Profiler Stage Thon Case Kemper Prof. Stage + EP1 Combination...(+) Kemper Profiler Stage Kemper Profiler Stage Thon Case Kemper Prof. Stage + EP1 Combination of Kemper Profiler guitar amplifier and Profiler Remote foot controller in one pedalboard-
Complete Profiler with the same functions and legendary sound of the well-known Profiler Head-
The combination allows you to control, manage and program performances, as well as rig switches and complex parameter morphs-
Backlit display that is easy to read even in sunlight-
Dimensions (W x D x H): 47 x 26 x 8.5 cm-
Weight: 4,6 kg-
Matching case: Art.471009 (not included in delivery) Mission Engineering EP1-KP-GN Input: 6.3 mm jack-
Return 1-4: 4x 6.3 mm stereo jack-
Main Out L & R: 2x XLR / 6.3 mm jack-
Monitor Out L & R: 2x 6.3 mm jack-
Send 1 & 2: 2x 6.3 mm jack-
Footswitch/Exp Pedal 1-4: 4x 6.3 mm stereo jack-
Headphone Out: 3.5 mm stereo jack-
MIDI In/Out/Thru-
S/PDIF In/Out-
USB |
|
| Tech 21 : SansAmp RBI
(75 comments)
Bass Preamp- In any studio in the world with the RBI in hand luggage you are ready to go o...(+) Bass Preamp- In any studio in the world with the RBI in hand luggage you are ready to go on the spot. Enter the console, adjust sound, done!- On live events, the SansAmp RBI can be connected to a Bass amp with box (e.g. TECH-21 Bass PowerWedge 60) and the P.A. system in parallel.- Extended rack version of the Bass Driver D.I.- Parallel/serial switchable effects loop- Adjustable XLR and jack output- 19"/ 1U |
|
| Empress Effects : Bass Compressor Blue Spk
(7 comments)
- Compressor- Controls: Input, output, attack, release, mix, SC HP- Switch: Ratio, tone + ...(+) - Compressor- Controls: Input, output, attack, release, mix, SC HP- Switch: Ratio, tone + colour- LED: Effect on, input, gain reduction- Footswitch: Effect bypass- Input: 6.3 mm Jack- Output. 6.3 mm Jack- Send/return: 3.5 mm Jack- Power adapter connection: Barrel connector, 5.5 x 2.1 mm, negative polarity inside- Current consumption: 100 mA- Power supply via a 9 - 18 V DC power supply (not included - suitable power supply under Article Nr. 409939)- True bypass- Dimensions (W x D x H): 66 x 122 x 64 mm- Weight: 454 g- Colour: Blue sparkle |
|
| Aguilar : Filter Twin
(18 comments)
- Dual envelope filter- 2 Low-pass filter (up-attack/ down-attack), single use or together...(+) - Dual envelope filter- 2 Low-pass filter (up-attack/ down-attack), single use or together- Controls for blend - threshold - 2x velocity- Gig-saver bypass- Power supply: 9V DC output (power supply not included) |
|
| Keeley : Bassist Compressor
(51 comments)
- High fidelity compression and bass limiting- Simultaneously musical and very transparent...(+) - High fidelity compression and bass limiting- Simultaneously musical and very transparent- Low noise- Also suitable for active preamplifiers and Line-Level input signals- Controls: Compression, Threshold, Gain- Threshold indicator LED- Power consumption: 15 mA- Power supply via 9 V battery or 9 V power supply (not included, suitable power supply e.g. article nr 409939) |
|
| EBS : MultiComp Blue Label
(44 comments)
- Compressor- 3 Switchable compression modes: Tubesim, Multiband and Normal- Controls: Com...(+) - Compressor- 3 Switchable compression modes: Tubesim, Multiband and Normal- Controls: Comp, Sens and Gain- 3-Way mode selector switch- True Bypass- Current consumption: 45 mA- Power supply via a 9V battery or 9-18 V DC power supply unit (not included in delivery, suitable power supply unit: Article Nr. 409939)- Dimensions (W x D x H): 67 x 115 x 48 mm- Weight: 315 g |
|
| Source Audio : AfterShock Bass Distortion
(73 comments)
- 3 different distortion types selectable via toggle switch: Tube mode for classic / gentl...(+) - 3 different distortion types selectable via toggle switch: Tube mode for classic / gentle tube distortion / heavy mode for aggressive germanium fuzz sounds with ample low-end and fuzz mode for modern, synth-like sounds- Stereo signal- USB port for connection to computer and firmware updates- MIDI-capable via optional Soundblox HUB with up to 128 slots (not included)- Further parameters and algorithms can be controlled via Neuro Mobile App (iOS& Android) and PC und Mac- Can be connected to a smartphone via the headphone jack- Controls for Drive / Clean / Tone and Level- Multi-function jacks to connect Source Audio Hot handheld controllers or the Toolblox DualExpression for real-time control of modulation or any controller- Universal bypass: on request analogue buffered or relay-switched true bypass possible- Brushed aluminum housing / anodised- Dimensions (L x W x H): 114 x 70 x 51 mm- Incl. 9 V DC power supply |
|
| Zoom : B1X Four Bass Multi Effect
(85 comments)
- 71 Internal effects- 9 Amp simulations- Usable up to five effects simultaneously and in ...(+) - 71 Internal effects- 9 Amp simulations- Usable up to five effects simultaneously and in any order- Looper with a length of up to 30 seconds / 64 beats in CD quality- Integrated expression pedal- Guitar Lab software for creating, editing and managing effects and patches- 68 Internal rhythm patterns- 50 Memory slots- Swap function for a particularly simple patch management- Automatic storage of all patch parameters- Integrated chromatic tuner- Auxiliary input jack- Output jacks for connection to the amplifier or headphones- Back-lit LCD with contrast adjustment- Lightweight and compact for transport in your gigbag- Easy integration into existing pedal-boards- Running time of up to 18 hours- USB port for firmware updates, power, and connection to Guitar Lab- Controls: Bass, Mid, Treble, Volume- Push-buttons: Rhythm, 5 x Effect Slots, Looper, Settings, Memory- Switch: Effect Up, Effect Down- LED: Effect On- Foot-switch: Looper, tuner, expression pedal- Input and output: 6.3 mm Jack- AC adapter connector, USB, AUX IN- Power consumption: 500 mA- Power supply by way of AA-batteries (running time of up to 18 hours or an optional 9 V DC power supply (not included, suitable power supply: Art. 105835)- Dimensions (W x D x H): 156 x 216 x 52 mm- Weight: 610 g |
|
| Amptweaker : Bass TightDrive MOD
- Bass overdrive- Modded version of the bass TightDrive- Additional dry lowend- From easil...(+) - Bass overdrive- Modded version of the bass TightDrive- Additional dry lowend- From easily tightening up the attack to building a thicker distortion- Built-in switchable effects loop- LED-backlit control knobs (for use with a mains adapter)- Magnetic battery-compartment cover for easy access to the battery- True bypass- Controls for: tight, gain, tone, volume and dry low- Recessed EFX loop switch (pre / post)- Battery switch to disconnect the battery when using a mains adapter- Bypass footswitch- Status LED- Metal housing- 6.3 mm Mono jack input / output- 6.3 mm Mono jack send return- Power supply via 9 V battery or an optional 9 V DC power supply (2.1 x 5.5 mm, coaxial power connector, negative polarity (-) inside)- Power consumption: 11 mA with battery / 26 mA with mains adapter- Dimensions (W x D x H): 93 x 127 x 51 mm- Weight: 900 g- Handmade in the USA |
|
| Rodenberg : LDP Deluxe OD/CB
(8 comments)
- 3 Completely independent pedals in one housing- Signal flow: Bass-> Low Gain Overdrive->...(+) - 3 Completely independent pedals in one housing- Signal flow: Bass-> Low Gain Overdrive-> High Gain Overdrive-> Boost-> Amplifier- Overdrive Low Gain control (Bass Boost switch): Level, Tone, Drive- Overdrive High Gain control (switch for Bass Boost): Level, Tone, Drive- Control Clean Boost (switch for Bass Boost and + 20dB Level Boost): Level, Tone- Push buttons: 3x True Bypass- Switch: Locked for overdrives- LED: Effect on- Footswitch: Effect bypass- Input: 6.3 mm jack- Output: 6.3 mm jack- Power supply connection: coaxial connector 5.5 x 2.1 mm, negative polarity inside- Current consumption: 50-100 mA- Power supply via 9 V DC power pack (not included, suitable power pack: Art.409939)- True bypass- Dimensions (W x D x H): 145 x 120 x 378 mm- Weight: 600 g- Handmade in Germany |
|
| Valeton : Dapper Bass Effect Strip
(116 comments)
- Chorus, Octaver, Bass Amp, Dirty Q, Boost Comp and Tuner- Tuner with fast response, "sil...(+) - Chorus, Octaver, Bass Amp, Dirty Q, Boost Comp and Tuner- Tuner with fast response, "silent tuning" and large, bright LED display- Chorus- Analogue, monophonic octaver- Bass amp module: Preamp section with many tone possibilities- Dirty Q: Fuzz module- Boost Comp- On / Off switch with status LEDs- Aluminium housing- Jack input & output- FX loop- Balanced DI Out- Parallel Out- Power consumption: 112 mA- Dimensions (W x D x H): 65 x 320 x 42 mm- Weight: 650 g- Includes 9 V power supply |
|
Bass Effects
