UHF Wireless-System- Diversity- 30 MHz Bandwidth- Can operate up to 8 frequencies simultaneously in this frequency band- Frequency scan- 50 mW Transmitting power- Pilot tone- Low battery warning on the transmitter- Bi-colour programmable display- Auto Set Up and Rehearsal mode for quick start- 9.5" Receiver in metal casing- Pocket transmitter with guitar cable, battery and battery level displayed in hours- Noiseless on/mute/off switch- Operates with 1 x 1.5V AA Batteries- Charging contacts f. CU 400- Infrared frequency transmission from receiver to transmitter- Receiver outputs: XLR (balanced) and Jack (unbalanced)- Frequency range: Band 10 (823 - 832 MHz)- Includes: 19 "/ 1U rack kit, guitar cable, 1 x batteries (1.5 V) and tripod adapter- Optional fast charger AKG CU 400: Article Nr. 182940- Condenser Clip Microphone for The Ovid System- Easy installation with different instrument holders (optional - not included)- With phantom power adapter (phantom power required)- Detachable cable with screw contact- Directivity: Cardioid- Frequency range: 20 - 20,000 Hz- Flexible gooseneck for easy alignment on the instrument- 3-Pin mini XLR connector for operating with t.bone wireless systems - also suitable for AKG wireless systems- Length of gooseneck: 130 mm- Cable length: 1.2 m- Optional cables with Sennheiser EW and Shure TQG connector available separately (not included)- Foam windshield included

Structure consisting of 5 segments- Combines high stability with low weight thanks to carbon composite fibre- Easy insertion and removal of the segments thanks to low-maintenance, durable counter bearings made of Teflon, felt and silicone lubricant- Internal cable routing- Cabling: Mono- Built-in spiral cable with 3-pin XLR connector- Length retracted: 1.340 mm- Length extended: 5.320 mm- Weight: 950 g / 1.3 kg (with cabling)

Neve 1073OPX with Dante/USB card; 8-channel microphone preamplifier; 8x combo jack microphone/line/instrument inputs on the front panel; separate Sub-D25 line and mic inputs on the rear panel; 8x line-out Sub-D25; remote-control software for easy access to all parameters and recall functionality; per channel 48V phantom power, 25 dB pad, switchable input impedance (300/1300 Ohms), 80 Hz low cut; Phase flip; separate stereo monitor path with independent level control; installed expansion card with 8 channels A/D conversion for each preamp output and two channels D/A conversion for digital monitor return signal; word clock in/out; digital headroom selector switch to switch the DMON input and digital preamp outputs 1 to 8 from +18dBu, +24dBu or +26dBu; can be used as a primary/core audio interface via the USB-B connector; the primary and secondary Dante connectors allow the 1073 OPX to be connected to any Dante Audio Over IP network as a Dante-capable preamplifier; dimensions: 19"/2 U

XVive U4 Battery Replacement Kit (BU4), Replacement lithium polymer battery for XVIVE U4 Wireless System, fully tested custom XVIVE batteries, precision control circuit to ensure charging safety, DIY package for easy battery replacement, 2 x lithium polymer batteries for transmitter and receiver, 1 x screwdriver , 1 x antenna cover for U4 transmitter, 2 x double-sided adhesive tape, transmitter battery: 860 mAh, 3.7 V, 2.4 Wh, receiver battery: 1200 mAh, 3.7 V, 4.44 Wh

KNA Pickups DB-1 Double Bass Pickup, piezo pickup, easy mounting by pushing the pickup into the notches of the bridge, the bridge opening may need to be slightly filed, no modifications on the instrument required, 6,3mm socket to be mounted on the tailpiece with a clamping screw, comes with 6 wooden paillettes for better adjustment to the bridge, comes without connection cable.

Structure consisting of 5 segments- Combines high stability with low weight thanks to carbon composite fibre- Easy insertion and removal of the segments thanks to low-maintenance, durable counter bearings made of Teflon, felt and silicone lubricant- Internal cable routing- Cabling: mono- Built-in spiral cable with 3-pin XLR connector- Length retracted: 840 mm- Length extended: 3.120 mm- Weight: 636 g / 970 g (with cabling)

SPL Channel One Mk3 Premium; channel strip; Microphone inputs and output Out 1 with Lundahl transformer ; 1-channel tube preamp with tube saturation, de-esser, transient designer, compressor and EQ; discrete preamp with 68 dB gain; parallel connection of two microphones with separately switchable 48V pahntom power for easy A/B comparisons; 20 dB pad, phase inversion and high-pass filter at 80 HZ switchable; 1x XLR line input with adjustable gain from -20 dB to +16 dB; 1x 6.3mm jack instrument input adjustable from -6 dB to +30 dB; Tube Saturation adjustable; Tube Post option switches the tube saturation after the EQ stage and before the output stage; De-esser with adjustable S-Reduction; Transient Designer with Attack and Sustain controls for envelope processing; Compressor with adjustable Threshold via Compression controls and Make-up Gain; Equalizer with semi-parametric Low/Mid and Mid/High bands as well as Air Band with center frequency at 19 kHz; VU meter visualizes input level, output level and gain reduction; two XLR outputs connected in parallel for back-up or average systems; 1x XLR Preamp Out picks up the signal directly after preamp and can be used simultaneously with Out 1 & 2; dimensions: 482 x 88 x 210 mm; Weight: 6 kg.

the t.bone Ovid System Case- the t.bone Ovid System CC 100- the t.bone Ovid System Piano Clip- the t.bone Ovid System Cello Clip- the t.bone Ovid System Bass Clip- the t.bone Ovid System Flute Clip- the t.bone Ovid System Sax Clip- the t.bone Ovid System Violin Clip- the t.bone Ovid System Guitar Clip