Eurolite LED TMH-H240 Beam/Wash/Flower Effect; Hybrid moving head with RGBW LEDs, zoom, macros, patterns and color temperature presets; 3in1 moving head - beam, wash and flower effect in one device; Each LED can be controlled separately via DMX; Motorized zoom, lens rotation, continuous color mixing, color change, preset colors, color temperature setting, pattern and flower effects, backlight; Variable speed strobe, random strobe effects; dimmer speed (step response) adjustable; Mains input and mains output for easy interconnection of up to 8 devices; 6 powerful LEDs 40 W 4in1 QCL RGBW (homogeneous color mixing); Positioning within 540° PAN and 240° TILT (PAN angle switchable between 540° and 360°); Auto Position Correction (Feedback); Exact positioning (16-bit resolution); Integrated show programs; In 16; 21; 24; 32; 56 CH DMX mode operable; The device is cooled by temperature-controlled fans; Controllable via standalone; music control via microphone; DMX; QuickDMX via USB (optional); master/slave function; flicker free; Effect: Strobe Effect; fan effect; with a beam angle of 2° - 40°; with Omega bracket; LCD display; Power supply: 100-240V AC, 50/60Hz; Total connected load: 190 W; Degree of protection: IP20; Protection class: SK I; Power Connection: Power Twist In / Out; DMX connection: XLR 3-pin; Beam angle: 2° - 40°; Recording system: 2x Omega brackets; Dimensions WxDxH: 26 x 18 x 33 cm; Weight: 6.10 kg

Input switchable between Moving Coil and Moving Magnet- Freely selectable signal preamplification- Switchable Low Cut Filter- Signal / Clip indicator- 2x Line-Out (RCA)- 2x Phono- / Line Inputs (RCA)- Groundlift- Power supply: 12V DC (included)- Dimensions: 47.5 x 117 x 108 mm- Weight: 0.86 kg

Key Leaves Rulon Palm Key Removal Kit; Set for removing the palm keys and covering the holes; Includes: cleaning cloths, tone hole covers, 2x screwdrivers, instructions, Ergonomic RULON thumb rest for small hands, Safe storage for removed palm keys, Travel screwdriver with magnetic holder, Fingering chart for learning the saxophone notes

Dans les années 80, les Superstars et Imperialstars de TAMA régnaient en maître - Des batteries parfaites pour l'époque. Mais les constructeurs et les designers de TAMA voulaient quelque chose qui transcende les tendances, quelque chose d'intemporel - des batteries qui comprenaient la passion d'un batteur et permettaient l'expression de chaque genre, style, humeur et technique. Ils ont créé les batteries Starclassic Maple ... et ont déclenché la révolution des fûts minces. Et maintenant, la gamme Exotic Finish offre de magnifiques finitions extérieurs en bois exotique uniques en leur genre pour une touche de luxe supplémentaire. De nombreuses options sont disponibles pour répondre aux besoins variés des batteurs professionnels, y compris une sélection de plus de 30 tailles de fûts différentes. La gamme Starclassic Maple proposent également trois finitions d'accastillage au choix : nickelé noir, chrome et nickelé noir mat. La Starclassic Maple est tout simplement une combinaison sans précédent de finitions et de sonorités. Caractéristiques 22”x16” BD, 10”x7” TT, 12”x8” TT, 16”x16” FT Fûts en érable, TT / FT: 6 plis 5 mm / BD: 8 plis 7 mm Système de montage Star-Cast Supports Tom Quick-Lock Cercles moulés sous pression Crochets à griffes avec entretoises en caoutchouc Pieds de tom basse sur coussins d'air Rondelles Hold Tight ™ Peaux Evans®

Dans les années 80, les Superstars et Imperialstars de TAMA régnaient en maître - Des batteries parfaites pour l'époque. Mais les constructeurs et les designers de TAMA voulaient quelque chose qui transcende les tendances, quelque chose d'intemporel - des batteries qui comprenaient la passion d'un batteur et permettaient l'expression de chaque genre, style, humeur et technique. Ils ont créé les batteries Starclassic Maple ... et ont déclenché la révolution des fûts minces. Et maintenant, la gamme Exotic Finish offre de magnifiques finitions extérieurs en bois exotique uniques en leur genre pour une touche de luxe supplémentaire. De nombreuses options sont disponibles pour répondre aux besoins variés des batteurs professionnels, y compris une sélection de plus de 30 tailles de fûts différentes. La gamme Starclassic Maple proposent également trois finitions d'accastillage au choix : nickelé noir, chrome et nickelé noir mat. La Starclassic Maple est tout simplement une combinaison sans précédent de finitions et de sonorités. Caractéristiques 22”x16” BD, 12”x8” TT, 16”x16” FT Fûts en érable, TT / FT: 6 plis 5 mm / BD: 8 plis 7 mm Système de montage Star-Cast Supports Tom Quick-Lock Cercles moulés sous pression Crochets à griffes avec entretoises en caoutchouc Pieds de tom basse sur coussins d'air Rondelles Hold Tight ™ Peaux Evans®

Hodge Silk Alto Sax Swab; wiper made of silk for alto saxophone; consisting of silk cloth and plastic-Coated lead weight: allows falling through the instrument without getting stuck; cleaning possible without removing the neck; lint-free, very absorbent and very compressible; delivery is unsorted in varying colours, no colour selection possible

The 5051 combines a classic three band EQ based on Rupert’s vintage designs with the power and flexibility of the Portico II compressor. Utilizing a fully-discrete, class-A signal path and high performance input and output transformers, the 5051 delivers the performance and musicality expected from a Rupert Neve Design.The EqualizerThe EQ design on the 5051 evokes sonic similarities with some of Rupert’s classic EQs. The 5051 uses a custom tapped inductor with selected capacitors to form the mid range equalizer band, and the shelf curves are based on Rupert’s vintage modules, including very similar frequency choices. Each EQ section also uses low feedback class-A discrete electronics to prevent low level artifacts and harshness from detracting from the tonal shaping. The EQ, however, is a modern design with advantages offered by techniques that were not possible 35 years ago along with improvements in electronic components currently available, and should not be considered a clone – it just has heritage.Both the High and Low Band can be switched from Shelf to Peak curves and offer 15 dB of boost or cut. The High can be switched from 8 kHz to 16 kHz and the Low Band selected at 35 Hz, 60 Hz, 100 Hz or 220 Hz. The inductor based Mid Band offers 6 center frequencies; 200 Hz, 350 Hz, 700 Hz, 1.5 kHz, 3 kHz and 6 kHz. The Mid Band also has a High Peak switch to narrow the bandwidth or increase the Q of the filter. The 5051 includes an 18 dB/octave High Pass Filter with two corner frequencies on a lit button that toggles through “OFF, 60 Hz then 120 Hz indicated by a blue or red LED respectively. Additionally, the EQ can be switched Pre or Post the compressor. Normally the EQ precedes the compressor but the order can be selected so that the EQ follows after the Compressor. The 5051 also has two XLR balanced inputs that can be switched from the front panel. This allows the user, for example, to have a mic preamplifier and line input from a DAW to be pre-patched and easily selectable.The CompressorThe 5051 Compressor also features a discrete class A signal path proven used in the Portico Series, withindividually controllable threshold, attack, release, makeup gain, ratio, side chain HPF, Feed-Forward / Feed-back selection and Peak/RMS detection modes. With the compressor inactive, the 5051 may be used as a transformer-coupled, high-performance line amplifier, and two 5051′s may be linked for stereo operation as well.How the Compressor WorksIn order to control gain, a V.C.A. or Voltage Controlled Amplifier (or Attenuator) is used. There are many types of V.C. including the use of tubes, discrete and integrated solid state circuits and naturally non-linear devices, each one having its characteristic behavior that reflects sonically on the final performance, and gives it a character or signature that can be musically attractive or not! The Portico 5051 compressor makes use of a very accurate, low noise, low distortion V.C.A. having, essentially, no signature of its own.A part of the audio signal is rectified and smoothed to produce a suitable control voltage for the V.C.A. which has to respond very quickly and have low distortion. If the response is too fast, low frequency signals will themselves, be gain controlled! If the response is too slow, the signal will overshoot and the first few cycles will not get compressed. The speed and accuracy of the response, known as the “attack”, and the time frame that gain remains under the initial control, known as “release” or “recovery” and plays a large part in the way a compressor sounds.Feed-Forward or Feed-Back The 5051 also has the ability to switch between feed-forward and feed-back modes. If the V.C.A. Control voltage is taken from the 5051 output, (i.e. after the V.C.A.) it cannot act immediately on the V.C.A. because it has already been modified by settings of the V.C.A. and circuits through which it has passed. This is known as a “Feed-Back” compressor. The two compression characteristics are quite different; there is more “Overshoot” and both the attack and recovery ramps are changed, providing the user with powerful choices. In most of Mr. Rupert Neve earliest designs, feed-back detection controlling the VCA with a rectified voltage from the unit output was intrinsic to the musical dynamic response. However, the very nature of a feedback compressor limits the attack time of the compression circuit. To offer faster, more technically accurate response times, feed-forward detection was implemented on Mr. Rupert Neve’s more modern designs. With the FF / FB switch, both classic and modern VCA responses are available. Ratio and ThresholdAbove a given “THRESHOLD” signals are reduced by an adjustable amount ranging from 1:1, (which is linear, or no reduction at all), to more than 40:1 which is a very high ratio, equivalent to that of a Limiter. RATIO is sometimes referred to as “Slope” because when depicted on a graph, the slope of the graph representing Output versus Input, is what changes.Ratio and Threshold are closely inter-dependent. If a RATIO as high as 40:1 has been set, then if the THRESHOLD is set at 0 dBu, even when a massive signal of +40 dBu (unlikely!) is presented to the input, the output signal will only be +1 dBu. RATIOS as high as this would normally be set somewhere above 0 dBu – say at +14 dBu, in order to prevent the output signal level exceeding just over +14 dBu to protect, for example, a digital recorder. Similarly, if a RATIO of 5:1 has been set, an input signal which is 10dB above THRESHOLD will only rise by 2dB above that THRESHOLD at the output.THRESHOLD control covers the Range from below -30dB to +22dBu. When THRESHOLD set at a low level, with a fairly high RATIO the amount of gain reduction will be considerable and it may be necessary to use some GAIN after the compressor to restore the apparent signal level.Attack TimeThe ATTACK time is the time taken for the compression circuits to start compressing. A long ATTACK time allows short duration peaks to “escape” and go through uncompressed. This may cause overload on subsequent digital circuits. A very short attack time sounds un-natural and robs the signal of “life” by removing transients. Some transients are extremely fast and have little effect on the sound quality. Setting a long attack time often means that almost no gain reduction occurs because the transient is history (!) before compression has had time to operate. However, even the fastest circuits take time to operate which means that there is always some “Overshoot”. Small amounts of “Overshoot” are musically desirable – there are exceptions, of course.Setting the right values of RELEASE and ATTACK is what compression is all about! Once the principles are understood a Compressor-Limiter such as the 5051 provides a powerful tool that actually appears to enhance the dynamic range of a recording and so provide greater musical enjoyment.Release / RecoveryThe notes above explain how the 5051 handles signals of constant amplitude such as pure tones. Real program signals, however, are continually changing in level. The way in which a compressor deals with actual program material depends upon the magnitude and duration of peaks in the program level.If the RELEASE TIME is set to be very short, a short duration signal will be compressed but the gain will return to normal very quickly, giving a fluctuating and un-natural sound known as “Pumping” when the background, or other signals, are forced up and down. The gain will also tend to follow the wave form of low frequency signals. RELEASE TIME should be set long enough for the gain to remain reasonably constant between each bass note or between speech syllables.The Power SupplyThe 5051 is intended for 5088 consoles or 5285 vertical frames. There are two +/- 24V power supply options; The 5-way supply is designed to sit in the bottom of a rack, and the 25-way supply is a 2U enclosure. The external +/- 24V supply provides exceptionally clean power, and reduces heat build-up within modules associated with DC-DC up-conversion.

Avenger F830 Swivelling Adapter Baby to Junior; has on one side a 5/8'' male pin and on the other side a female 5/8'' receiver; Removing the tightening knob allows to drop it into a 1 1/8'' receiver; Made of Zinc plated steel; Length: 19.5 cm; Weight: 0,7 kg

Dans les années 80, les Superstars et Imperialstars de TAMA régnaient en maître - Des batteries parfaites pour l'époque. Mais les constructeurs et les designers de TAMA voulaient quelque chose qui transcende les tendances, quelque chose d'intemporel - des batteries qui comprenaient la passion d'un batteur et permettaient l'expression de chaque genre, style, humeur et technique. Ils ont créé les batteries Starclassic Maple ... et ont déclenché la révolution des fûts minces. Et maintenant, la gamme Exotic Finish offre de magnifiques finitions extérieurs en bois exotique uniques en leur genre pour une touche de luxe supplémentaire. De nombreuses options sont disponibles pour répondre aux besoins variés des batteurs professionnels, y compris une sélection de plus de 30 tailles de fûts différentes. La gamme Starclassic Maple proposent également trois finitions d'accastillage au choix : nickelé noir, chrome et nickelé noir mat. La Starclassic Maple est tout simplement une combinaison sans précédent de finitions et de sonorités. Caractéristiques 22”x16” BD, 12”x8” TT, 16”x16” FT Fûts en érable, TT / FT: 6 plis 5 mm / BD: 8 plis 7 mm Système de montage Star-Cast Supports Tom Quick-Lock Cercles moulés sous pression Crochets à griffes avec entretoises en caoutchouc Pieds de tom basse sur coussins d'air Rondelles Hold Tight ™ Peaux Evans®

Suitable for vinyl and shellac records- For removing impurities and grease residues- Sufficient for approx. 40 - 50 records- Environmentally friendly- Ready for use- Evaporates quickly- Application temperature between 20 - 40 degrees Celsius- Non-flammable- Alcohol-free- Contents: 250 ml