The Shelford 5052 echoes the simple and definitive 1073 feature set with a vertically-oriented mic pre, high pass filter, and 3-band inductor EQ, while also incorporating modern capabilities like the variable Silk / Texture control from the Portico II Series and simultaneous pre / post “tape” operation. Utilizing class-A, discrete, +/- 24V topologies with custom-wound transformers and inductors, Rupert Neve designed the 5052 as a vintage-style channel strip that captures the soul of his classic designs, without the previous compromises.The Mic PreLike Rupert’s designs from his time in Shelford, the 5052 preamplifier has 72dB of discrete, class-A gain coupled with serious square-core transformers. Unlike the classics however, the output transformer features the Silk Red / Blue and Texture controls from the Portico II Series to hone the harmonic content and tonality of the output stage. By engaging these controls and sufficiently driving the output, the 5052 can produce up to 4-5% THD (primarily 2nd order, some 3rd order), bringing a richness and thickness to tracks when desired with no danger of overloading the output stage. With Silk disengaged, the output is modern and pristine, yet still retains Rupert’s signature larger-than-life transformer sound. The mic pre section also includes a sweepable 20-250Hz high-pass filter, Mic / Line selection, 48V phantom power, and polarity reverse.Dual I/O PathsFollowing the preamplifier, the 5052 has a transformer-coupled output, which allows the 5052 to feed a tape machine or DAW directly from the mic pre while still using the EQ and Silk / Texture in a dedicated analogue mix path such as that found with a 5088, 5060 or vintage console. This output can also be used to insert a separate compressor between the mic pre and the EQ, or it can allow the 5052 to work with two separate sources. When the “TO EQ” button is engaged, the mic pre signal is routed directly into the EQ such that the mic / line input signal flows through to the main output as a single channel strip.The “best of the classics” EQThe 3-band, custom-tapped inductor EQ on the 5052 was inspired by RND’s favorite portions of Rupert’s vintage EQ designs. The low frequency band is primarily based on the 1064, which is renowned for its creamy, resonant bass. Unlike the 1064 however, the LF band on the 5052 can be used as either a shelf or a peak filter, adding punch, dimension, and immense control to your low end. The 5052’s inductor midrange band is based on his prized 1073 EQ, which is ideal for sweetening vocals and instruments while bringing them forward in a mix. Additionally, the mid frequency band’s proportional “Q” response makes it well-suited for minimizing problematic frequencies in a source. The 5052’s high frequency band is a hybrid vintage / modern design, blending inductor circuitry from the 1073 with capacitor-based topologies to achieve the vintage tones with enhanced control. As Rupert originally intended with his most prized classic designs, each EQ section uses low-feedback, class-A discrete electronics to prevent low-level artifacts and harshness from detracting from the tonal shaping. The EQ circuit itself, however, is a decidedly modern updated design using techniques and components that were simply not available 35 years ago, and should not be considered a “clone”.Power, Connections and MountingThe 5052 receives +/- 24V rails from an external DC power supply using a 4-pin connection. There are currently two options available: the RND 5-way brick supply and the RND 25-way 2U rack-mount supply. The back panel of the 5052 includes three XLR-F connections for Mic In, Line In, and EQ In, and two XLR-M connections for Mic Out and Main Out. The 5052 chassis is a “half-rack” format, and can be mounted in RND’s new 2 –way and 4-way vertical racks in addition to the existing 9-way racks and the 5088 penthouse.

Les guitares de la série G30 bénéficient d’une construction solide et d’une excellente qualité sonore adaptée à un large éventail de styles musicaux. **La polyvalence et la qualité à un prixaccessible. Enfin !**La GD30CE est une guitare dreadnought électroacoustique, parfaitement adaptée à la scène comme à la maison. Elle bénéficied'une construction solide et de lignes épurées qui lui confèrent un caractère fiableet élégant. Dotée d'une table en épicéa massif ainsi que d'un dos et d’éclissesen acajou, cette folk délivre un son précis et riche en harmoniques. Le mancheen acajou et la touche en ovangkol procurent quant à eux un réel confort de jeutandis que le préampli Takamine TP-4TD comporte un accordeur intégré, unégaliseur à trois bandes et un contrôle de gain pour vos performance live.- Catégorie : Folk électroacoustique - Coloris : Noir - Cordes : métal - Électronique : préampli TP-4TD avec accordeur intégré - Finition : Vernis brillant - Fond & éclisses : Acajou - Format : Dreadnought - Housse/étui : En option - Largeur au sillet : 42,80 mm - Manche : Acajou - Nbre de cordes : 6 - Nbre de frettes : 20 - Pan coupé : Oui - Repères : Point - Sillets : Os synthétique compensé - Table : Épicéa massif - Touche : Palissandre