Roland Integra-7 (4 commentaires)
INTEGRA-7 Module SuperNATURALConcentré de puissance en rack pour un travail rapide et flu...(+) INTEGRA-7 Module SuperNATURALConcentré de puissance en rack pour un travail rapide et fluidecaractéristiquesAvec le développement des générateurs sons SuperNATURAL et de la technologieBehavior Modeling, Roland brouille les lignes de démarcation entre instruments acoustiques et électroniques. Reposant sur ces technologies de pointe, le nouvel INTEGRA-7 offre aux musiciens une véritable mine d’or sonore incluant les derniers sons SuperNATURAL dans un module multitimbral à 16 parties, d’accès simple et rapide. Cet incroyable boîtier propose les meilleurs sons des plus grands claviers et modules V-Drums Roland ainsi que la légendaire collection de sonorités vintage SRX. De plus, il exploite une nouvelle technologie appeléeMotional Surround, un processeur à 17 parties qui permet de déterminer de façon graphique la position de chaque partie dans un champ sonore de 360°. La puissance inédite de l’INTEGRA-7 permet de créer des arrangements orchestraux extrêmement réalistes et précis ainsi que des sons d’une profondeur inégalée.- Module de synthé haut de gamme avec plus de 6000 sons- Sons SuperNATURAL avec technologie ‘Behavior Modeling’ générant des sons acoustiques avec une expressivité et des articulations extraordinaires- Puissant générateur de sons de synthé SuperNATURAL reproduisant des sons analogiques épais à souhait et des filtres vintage- Sons de batterie SuperNATURAL issus des modules Roland V-Drums- Bibliothèque incontournable de sons d’extension SRX offrant l’intégralité des 12 cartes SRX- Egaliseur et processeur multi-effet dédiés pour chacune des 16 parties plus six sets COMP+EQ pour batterie et paramètres ‘Ambience’ pour kits de batterie SuperNATURAL- Technologie ‘Motional Surround’ innovante à 17 parties pour sortie stéréo, casque et surround (5.1 canaux)- Applications ‘INTEGRA-7 Editor’ pour iPad et ‘Motional Surround VSTi Editor’ pour logiciel SONARProduction musicale avec sons SuperNATURALL’INTEGRA-7 se distingue par ses sons SuperNATURAL et la technologieBehavior Modeling. Les sons SuperNATURAL ne se contentent pas de restituer les sons d’instruments acoustiques : ils simulent également le comportement de ces instruments. Avec la technologie SuperNATURAL, les sons prennent vie sous vos doigts.Que vous utilisiez des sons acoustiques ou électroniques, l’INTEGRA-7 offre des possibilités d’expression sans pareilles. De plus, vous pouvez programmer vos propres sons en détail ou laisser l’INTEGRA-7 le faire pour vous. Avec autant de sons exceptionnels et la réponse naturelle de l’INTEGRA-7 à votre jeu sur le clavier/contrôleur, vous avez tous les instruments du monde sous la main.Sons acoustiques SuperNATURALVous trouverez ici quelques exemples de sons SuperNATURAL Acoustic de l’INTEGRA-7 et une description de leur comportement :- Piano à queue- Piano électrique- Guitare- Cordes- Cuivres- Instruments du monde- SuperNATURAL Synthesizer- Batteries et effets spéciaux SuperNATURAL- Sons de légende incontournablesRoland a une longue histoire ponctuée de synthétiseurs mythiques encore et toujours convoités. L’INTEGRA-7 propose unbest ofdes sons de synthés Roland. Tous les sons du XV-5080 s’y trouvent auxquels s’ajoutent les sons des 12 cartes d’extension SRX dont la série SRX-05 Supreme Dance avec les sons électro des fameuses boîtes à rythmes vintage TR-808 et -909, la série SRX-06 Complete Orchestra proposant une immense collection d’instruments orchestraux et d’effets spéciaux ou la série SRX-09 World Collection qui constitue une véritable encyclopédie des instruments du monde avec des échantillons rarissimes. L’INTEGRA-7 est doté de quatre fentes d’extensions virtuelles (ou mémoires) permettant de charger jusqu’à quatre bibliothèques SRX simultanément. Avec tous ces grands classiques et les derniers sons SuperNATURAL, l’INTEGRA-7 rassemble le passé, le présent et l’avenir au sein d’un instrument extrêmement pratique et convivial !Remarques : Comme l’INTEGRA-7 utilise un processeur multi-effet de dernière génération, les sons des bibliothèques d’extension SRX ne seront pas identiques à ceux produits par d’anciens modules ou synthétiseurs. L’INTEGRA-7 ne peut pas charger de données du XV-5080.Motional SurroundL’INTEGRA-7 ouvre une nouvelle ère de conception sonore multidimensionnelle. La technologieMotional Surround— issue de la technologie Roland brevetée RSS (Roland Sound Space) — permet de déterminer non seulement la position sur un axe gauche/droite d’une partie mais également sur un axe avant/arrière : rien ne vous empêche de les placer derrière vous ! Vous pouvez, par exemple, placer un instrument solo à proximité et les instruments d’accompagnement ou de percussion plus loin afin de générer un champ sonore d’une largeur et d’une profondeur naturelles. L’effetMotional Surroundest particulièrement saisissant avec les simulations d’orchestre.Ce nouvel effet peut aussi être appliqué à des signaux audio externes : branchez un lecteur audio ou un instrument aux entrées de l’INTEGRA-7 et donnez-lui une nouvelle dimension avecMotional Surround. Réglez les paramètres en temps réel via MIDI, avec l’application dédiée pour iPad ou le plug-in d’édition VSTi pour stations de travail audio numériques (DAW) comme SONAR. Vous pouvez même enregistrer les mouvementsMotional Surroundavec SONAR pour qu’ils soient reproduits automatiquement.Motional Surroundest compatible avec un signal de sortie sur deux canaux, ce qui vous permet de profiter de l’effet avec deux enceintes ou un casque ! L’impact sera cependant plus impressionnant encore si vous utilisez une sortie sur 5.1 canaux (5 enceintes et un caisson de graves).Matériel d’excellente qualitéElégant et robuste, l’INTEGRA-7 est d’une conception soignée. Intégré dans un boîtier métallique robuste, il a été conçu pour résister à des dizaines d’années d’utilisation, que ce soit en studio ou sur la route. Les composants internes de l’INTEGRA-7 sont d’excellente qualité, à l’image des convertisseurs D/A à faible niveau de bruit. Il contient également des processeurs d’effets dédiés : aucun risque de surcharger le processeur central ! De plus, chacune des 16 parties a son propre processeur multi-effet et son égaliseur.La façade de l’INTEGRA-7 comprend des boutons dédiés permettant d’accéder rapidement aux sons et aux effets plus une grande molette entourée de curseurs et de boutons. L’écran est clair et lisible et vous pouvez en régler le contraste et la luminosité.La connectique en face arrière est impressionnante avec des sorties stéréo XLR, 8 sorties individuelles (jack 1/4”), une sortie numérique (coaxiale), des prises MIDI In/Out/Thru et une prise USB compatible avec des flux audio allant jusqu’à 24 bits/96kHz. Pour plus de facilité et de flexibilité, il y a des entrées en face arrière et en face avant.Atouts et ajouts appréciablesAussi puissant qu’innovant, l’INTEGRA-7 reste très simple à manier avec son moteur de rechercheTone Finderqui agence les quelques 5.000 sons par catégories logiques et permet un accès rapide. Il suffit d’appuyer sur le bouton [Tone Finder] et de choisir une catégorie. Quand un son vous tente, appuyez sur la commande Volume pour l’écouter. Cette fonctionPreviewjoue une phrase adaptée au son qui illustre la simulation des articulations propres à l’instrument.Parmi d’autres fonctions intéressantes, citons la série de sons GM2 d’une qualité exceptionnelle (utilisant les quatre mémoiresVirtual Slot) pour la reproduction de fichiers SMF avec des séquenceurs externes, six sons SuperNATURAL supplémentaires (utilisant chacun une mémoireVirtual Slot), une prise pour clé USB en façade (permettant de sauvegarder vos réglages) et une application iPad Editor. Celle-ci permet de piloter à distance les paramètres de synthé, le mélangeur de parties et l’effetMotional Surroundde l’INTEGRA-7 ainsi que la sélection de sons et de Studio Sets à partir d’un iPad.Les nouveaux claviers de contrôle MIDI Roland A-88 et A-49 sont des partenaires de choix pour l’INTEGRA-7. Le bouton [SuperNATURAL] de l’A-88 / A-49 assigne automatiquement les paramètres les plus appropriés de l’INTEGRA-7 au levier de modulation, aux commandes et au contrôleur D-BEAM pour piloter le son SuperNATURAL choisi.Applications : - Pour une production musicale professionnelle : L’INTEGRA-7 compte plus de 6000 sons, couvrant un univers complet de genres musicaux. Pour avoir l’équivalent sur ordinateur, il faudrait intégrer plusieurs synthés logiciels en croisant les doigts pour éviter une surcharge de la RAM et du processeur central. L’INTEGRA dispose de pratiquement tous les sons nécessaires pour n’importe quel type de production musicale ou de musique de film, allant des essentiels comme les pianos, les cuivres, les batteries et les cordes à des instruments issus des quatre coins du monde. A cela s’ajoutent d’innombrables sons ou effets spéciaux donnant plus d’impact aux morceaux ou aux bandes-son. L’effetMotional Surroundajoute une dimension supplémentaire à votre son et produit des simulations d’orchestre, par exemple, d’une profondeur et d’un réalisme étourdissants !- Pour la télévision et la radio : Si vous avez besoin rapidement de plages musicales de qualité pour vos émissions, vous pouvez envoyer des fichiers standard MIDI à l’INTEGRA-7 et profiter de la superbe série de sons GM2 internes.Motional Surroundvous permet de créer des effets sonores et des jingles époustouflants de profondeur et de spatialité. Si vous avez un stock de jingles et de clips d’effets préenregistrés, envoyez-les aux entrées audio de l’INTEGRA-7 et traitez ces enregistrements avecMotional Surround.- Pour les écoles de musique : Pour l’enseignement de la composition musicale, l’INTEGRA-7 est un outil pratique pour utiliser ou faire découvrir des sons et des instruments du monde. Si vous utilisez un clavier de contrôle MIDI A-49 ou A-88, une simple pression sur le bouton [SuperNATURAL] suffit pour profiter pleinement de tous les atouts des sons incroyablement expressifs de l’INTEGRA-7. De plus, les professeurs et les élèves peuvent emporter leurs réglages personnels sur clé USB.- Pour les musées, les galeries d’art et les planétariums : Avec le processeurMotional Surroundde l’INTEGRA-7, vous pouvez créer de la musique pour des expositions spéciales et faire vivre au public de nouvelles expériences. Positionnez et faites tourner les éléments de vos effets spéciaux et de vos compositions dans une image sonore de 360°. Vous pouvez aussi utiliser un ordinateur ou un iPad pour positionner les éléments de façon graphique.Motional Surroundpeut être utilisé en mode stéréo sur 2 canaux, en mode casque ou en mode surround sur 5.1 canaux*.* Pour la reproduction sur 5.1 canaux, il vous faut 5 enceintes actives (gauche, droite, centre, arrière gauche, arrière droite) et 1 caisson de graves. Dolby Digital et DTS ne sont pas reconnus. | |
Q52PB ANTIQUE BROWN STAINED
Guitare électrique Ibanez Q52PBManche Wizard C 3pc en érable torréfié/bubingaPour rép...(+) Guitare électrique Ibanez Q52PBManche Wizard C 3pc en érable torréfié/bubingaPour répondre à la demande de différents styles de jeu, cette Manche Wizard C a une forme très neutre - elle n'est ni trop épaisse, ni trop fine, ni trop plate. La construction 3pc en érable torréfié/bubinga offre également une grande stabilité et une durabilité à long terme.Table en loupe de peuplier / corps en NyatohLa table en ronce de peuplier présente un grain de bois exotique et le corps en Nyatoh offre un riche registre médium-grave.Micros Q58 H-H Les micros Q58 sont conçus spécifiquement pour être utilisés dans les guitares sans tête. Ils offrent un son clairement défini, facilitant un excellent équilibre tonal sur toutes les fréquences. Les graves sont puissants sans être boueux, et les aigus sont brillants et clairs, mais jamais durs. Par conséquent, chaque note de la structure de l'accord est bien définie et clairement audible. Ces micros, avec leur équilibre tonal et leur niveau de bruit extrêmement faible, fonctionnent très bien avec les effets numériques et analogiques.Verrouillage des cordes personnaliséCe dispositif de blocage des cordes est une unité monobloc de construction très simple. Cela signifie que l'accastillage nécessite moins d'entretien, qu'il est très résistant et qu'il permet de changer très facilement les cordes. De plus, aucune corde propriétaire n'est requise, ce qui vous permet de continuer à utiliser votre calibre et votre marque préférés.Chevalets Mono-TuneLes chevalets Mono-Tune offrent une large plage d'intonation, ce qui vous permet de régler facilement l'instrument pour descendre d'un cran ou même plus. La hauteur des cordes est également facilement réglable, et chaque sillet comporte généralement moins de matériau, ce qui permet d'obtenir un son plus naturel et plus organique.Système de commutation dyna-MIX10 avec Alter SwitchLe dyna-MIX 10 offre dix variations sonores et peut facilement passer du mode humbucker au mode single coil grâce au mini commutateur. Le mode Power Tap offre un son de bobine simple réaliste malgré la présence de deux micros humbucker.Touche d'érable torréfié BirdseyeLa superbe touche en érable Birdseye confère à ce modèle un aspect exotique. La touche est traitée thermiquement pour une attaque équilibrée et un sustain riche.Frettes Jescar EVOgold Les frettes Jescar EVOgold sont connues pour leur sonorité brillante, leur superbe apparence et leurs excellentes caractéristiques telles que la durabilité à long terme et la fluidité de la flexion des notes.Design ergonomique du corpsLe corps présente un certain nombre de courbes stratégiquement placées sur le dessus et le dos de l'instrument. Cette conception complexe, mais sophistiquée, offre un confort de jeu maximal.Corps compact et léger, mais résonantBien qu'elle soit vraiment compacte et légère, son corps massif non chambré offre un son exceptionnel avec des sonorités boisées riches.Système de commutationLorsque le commutateur alter est en position Manche, le mode Power Tap est activé. Lorsque le sélecteur est en position chevalet, le mode Power Tap est désactivé. Lorsque le mode Power Tap est désactivé et que le sélecteur de micro est en position manche, le micro manche est sélectionné. Lorsque le sélecteur est en position manche et centrale, le côté chevalet du micro manche et le côté manche du micro chevalet sont sélectionnés.Lorsque le commutateur est en position centrale, les micros manche et chevalet sont sélectionnés. Lorsque le commutateur est en position centrale et chevalet, le côté manche du micro manche et le côté chevalet du micro chevalet sont sélectionnés. Lorsque le commutateur est en position chevalet, le micro chevalet est sélectionné. Lorsque le mode Power Tap est activé et que le sélecteur de micro est en position manche, le micro manche est sélectionné et en mode Power Tap.Lorsque le sélecteur se trouve entre la position manche et la position centrale, le côté chevalet du micro manche est sélectionné. Lorsque le sélecteur est en position centrale, les micros manche et chevalet sont sélectionnés et sont tous deux en mode Power Tap. Lorsque le commutateur est en position centrale et chevalet, le côté chevalet du micro chevalet est sélectionné. Lorsque le commutateur est en position chevalet, le micro chevalet est sélectionné et est en mode Power Tap.CommandesLorsque la guitare est tenue en position de jeu, un bouton et un interrupteur se trouvent le long du bord inférieur du corps. Le sélecteur de micros à cinq positions est situé le plus près de la découpe du genou. Le bouton de tonalité est situé le plus près de l'extrémité du corps. Le bouton de volume est situé juste au-dessus du sélecteur de micro à cinq voies. Entre les boutons de volume et de tonalité se trouve le commutateur d'altération.Dimensions du mancheDiapason : 648mm/25,5a : Largeur : 42mm au Silletb : Largeur : 57 mm à 24Fc : Épaisseur : 21mm à 1Fd : Épaisseur : 22mm à 12FRadius : 305mmRSchéma du manche de la guitarea : Largeur du manche au niveau du silletb : Largeur du manche au niveau de la première frette.c : Épaisseur du manche à la première fretted : Epaisseur du manche à la douzième fretteRadius : Radius de la touche.Caractéristiques : Type de manche : Wizard C / 3pc manche en érable torréfié/bubingatable/arrière/corps : Table en peuplier flambé / Corps en nyatohtouche : érable Torréfié Birdseye touche érable / Mère de la perle incrustation point décaléfrettes : Jumbo JESCAR EVOgold frettesnombre de frettes : 24chevalet : chevalet Ibanez Mono-Tuneespace entre les cordes : 10.8mmmicro manche : Q58 (H) micro manche (Passif/Céramique)micro chevalet : Q58 (H) micro de chevalet (Passif/Céramique)accordage d'usine : 1E,2B,3G,4D,5A,6ECordes : D'Addario® XL110Calibre des cordes : .010/.013/.017/.026/.036/.046Couleur de l'accastillage : Cosmo BlackVerrouillage des cordes Ibanez CustomSystème de commutation dyna-MIX10 avec commutateur d'altérationIncrustation de points latéraux luminescentsHousse de transport incluseEtui recommandé : MR350C | |
Ibanez Bass Workshop Ehb1005ms-bkf Black Flat
Depuis plus de 40 ans, Ibanez a ouvert de nouvelles frontières dans le développement des...(+) Depuis plus de 40 ans, Ibanez a ouvert de nouvelles frontières dans le développement des basses, repoussant les limites des conceptions conventionnelles aux bassistes de tous styles et aptitudes de nouvelles façons de s'exprimer. Cet esprit d'exploration a conduit à la création de certaines des basses de production les plus populaires et les plus populaires de tous les temps. En utilisant l'expérience et les connaissances jusqu'à présent, Ibanez a développé des basses ergonomiques ultimes, les basses EHB, qui présentent un design sans tête profondément considéré. La construction sans tête de l'EHB et le corps spécialement conçu permettent au joueur de maintenir une position de jeu similaire, assis ou debout. Son design profilé et ergonomique et son corps chambré en font un instrument léger, bien équilibré et confortable, excellent pour les longs sets ou les séances d'entraînement. Il y a une sculpture supplémentaire à l'arrière du corps derrière la corne inférieure pour un accès plus facile aux frettes supérieures. De plus, la moitié supérieure de l'arrière du corps est inclinée, ce qui permet aux basses de reposer légèrement plus près du corps du joueur pour un meilleur contrôle et une sensation plus ergonomique. Le EHB1005MS est doté d'un corps en tilleul américain et d'un manche en 5 pièces en érable / noyer rôti pour un son bien équilibré et une attaque claire. L'érable rôti dans le manche est traité thermiquement pour augmenter la stabilité, la durabilité, la résistance à l'humidité et la tolérance aux changements de température. Le manche en érable rôti est également traité thermiquement pour une attaque équilibrée et un sustain riche. Les frettes en acier inoxydable très durables accentuent la luminosité tonale et ne rouillent pas. Les incrustations de points latéraux luminescents offrent une visibilité claire dans les environnements sombres et le réglage du truss rod est situé à l'extrémité du cou pour un accès facile. Avec sa conception multi-échelles, l'EHB1005MS crée un son ouvertvivantet est confortable à jouer. La construction ergonomique se coordonne avec l'angle de la main du joueur lors de ses mouvements de haut en bas du cou, ce qui facilite une action de jeu rapide et fluide. Les micros Bartolini BH2 dans une configuration de style à double bobine avec une fréquence de résonance inférieure, offrent une réponse équilibrée et chaleureuse avec une extrémité inférieure plus serrée et un milieu de gamme plus complet. L'égaliseur 3 bandes Vari-Mid dispose d'un contrôle de fréquence moyenne variable qui vous permet de composer une gamme incroyablement large de sons. Il existe également un commutateur de contournement d'égalisation pour un fonctionnement passif, la commande des aigus agissant comme une commande de tonalité passive lorsque l'égalisation est contournée. Le chevalet MR5HS est spécialement conçu pour les basses EHB et dispose d'une large plage d'intonation. Chaque pièce de chevalet est attachée de manière indépendante et sécurisée au corps pour un transfert de vibrations maximal, et les selles sont réglables pour un espacement des cordes de +/- 1,5 mm, répondant aux exigences d'espacement des cordes de chaque bassiste, quel que soit le style de jeu. Des rondelles en téflon sont utilisées sur chaque accordeur pour une action de réglage en douceur. Les broches de verrouillage de la sangle Schaller S-Lock et une prise de verrouillage Neutrik maintiennent fermement la sangle et le câble, et une rampe amovible et un sac de transport sont inclus avec chaque instrument. Ibanez Elgonomicaly Conçu Basses EHB 5 Cordes Multi Scale Conception du corps ergonomique pour garder un équilibre parfait en position debout et assise Bord du corps confortablement arrondi Corps chambré Coupe échancrée sur le dos du corps pour un accès facile à la position haute Corps en tilleul d'Amérique Touche en érable piqué Frettes en acier inoxydable 5 pièces en érable rôti / noyer avec tiges de renfort en graphite Incrustation de points latéraux luminescents Micros Bartolini BH2 Egaliseur 3 bandes Vari-Mid avec commutateur de dérivation EQ Pont mono rail MR5HS avec selles ajustables à espacement des cordes Broches de sangle Schaller S-Locks et cric de verrouillage Neutrik Rampe amovible pour les doigts incluse Housse de protection incluse Type de manche: EHB5 Joint de col: à boulonner Matériau du manche: 5 pièces en érable grillé / noyer tiges de renfort: Tiges de renfort en graphite Finition du manche: polyuréthane satiné Épaisseur du manche (1ère frette, mm): 19,5 Épaisseur du manche (12e frette, mm): 21,5 Diapason (mm): 889 - 838 Largeur au sillet (mm): 45 Largeur d'extrémité (mm): 74 Nombre de frettes: 24 Touche: érable à œil d'oiseau rôti Rayon de touche (mm): 500 Type de frette: acier inoxydable moyen Incrustation: point décalé d'ormeau Matériel du corps: American Basswood Finition du corps: polyuréthane satiné Longueur totale (mm): 1042 Épaisseur du corps (mm): 42 Longueur du corps (mm): 517 Largeur du corps (mm): 312 Pont: MR5HS Espacement des cordes (mm): 18 Actif ou passif: actif Écrou: plastique Tête de machine: coiffes personnalisées Ibanez Couleur du matériel: noir Micro manche: Bartolini BH2 Micro chevalet: Bartolini BH2 EQ (actif): Egaliseur 3 bandes Vari-Mid Contrôles, sélecteur de micros: 1 volume, 1 équilibreur, basses, médiums, aigus, vari-mid Incrustation de points latéraux: incrustation de points latéraux luminescents Verrou de sangle: goupilles de verrouillage de sangle Schaller S-Locks Cordes spéciales: D'Addario EXL1705SL Jauges de cordes (de haut en bas): .045 / .065 / .080 / .100 / .130 Réglage (de haut en bas): 1G, 2D, 3A, 4E, 5B Étui ou sac inclus: PGPGB Autre (s) article (s) inclus: Clé hexagonale Poids net (g): 3500 | |
Ibanez Bass Workshop Ehb1005ms-sfm Sea Foam Green Matte
Depuis plus de 40 ans, Ibanez a ouvert de nouvelles frontières dans le développement des...(+) Depuis plus de 40 ans, Ibanez a ouvert de nouvelles frontières dans le développement des basses, repoussant les limites des conceptions conventionnelles aux bassistes de tous styles et aptitudes de nouvelles façons de s'exprimer. Cet esprit d'exploration a conduit à la création de certaines des basses de production les plus populaires et les plus populaires de tous les temps. En utilisant l'expérience et les connaissances jusqu'à présent, Ibanez a développé des basses ergonomiques ultimes, les basses EHB, qui présentent un design sans tête profondément considéré. La construction sans tête de l'EHB et le corps spécialement conçu permettent au joueur de maintenir une position de jeu similaire, assis ou debout. Son design profilé et ergonomique et son corps chambré en font un instrument léger, bien équilibré et confortable, excellent pour les longs sets ou les séances d'entraînement. Il y a une sculpture supplémentaire à l'arrière du corps derrière la corne inférieure pour un accès plus facile aux frettes supérieures. De plus, la moitié supérieure de l'arrière du corps est inclinée, ce qui permet aux basses de reposer légèrement plus près du corps du joueur pour un meilleur contrôle et une sensation plus ergonomique. Le EHB1005MS est doté d'un corps en tilleul américain et d'un manche en 5 pièces en érable / noyer rôti pour un son bien équilibré et une attaque claire. L'érable rôti dans le manche est traité thermiquement pour augmenter la stabilité, la durabilité, la résistance à l'humidité et la tolérance aux changements de température. Le manche en érable rôti est également traité thermiquement pour une attaque équilibrée et un sustain riche. Les frettes en acier inoxydable très durables accentuent la luminosité tonale et ne rouillent pas. Les incrustations de points latéraux luminescents offrent une visibilité claire dans les environnements sombres et le réglage du truss rod est situé à l'extrémité du cou pour un accès facile. Avec sa conception multi-échelles, l'EHB1005MS crée un son ouvertvivantet est confortable à jouer. La construction ergonomique se coordonne avec l'angle de la main du joueur lors de ses mouvements de haut en bas du cou, ce qui facilite une action de jeu rapide et fluide. Les micros Bartolini BH2 dans une configuration de style à double bobine avec une fréquence de résonance inférieure, offrent une réponse équilibrée et chaleureuse avec une extrémité inférieure plus serrée et un milieu de gamme plus complet. L'égaliseur 3 bandes Vari-Mid dispose d'un contrôle de fréquence moyenne variable qui vous permet de composer une gamme incroyablement large de sons. Il existe également un commutateur de contournement d'égalisation pour un fonctionnement passif, la commande des aigus agissant comme une commande de tonalité passive lorsque l'égalisation est contournée. Le chevalet MR5HS est spécialement conçu pour les basses EHB et dispose d'une large plage d'intonation. Chaque pièce de chevalet est attachée de manière indépendante et sécurisée au corps pour un transfert de vibrations maximal, et les selles sont réglables pour un espacement des cordes de +/- 1,5 mm, répondant aux exigences d'espacement des cordes de chaque bassiste, quel que soit le style de jeu. Des rondelles en téflon sont utilisées sur chaque accordeur pour une action de réglage en douceur. Les broches de verrouillage de la sangle Schaller S-Lock et une prise de verrouillage Neutrik maintiennent fermement la sangle et le câble, et une rampe amovible et un sac de transport sont inclus avec chaque instrument. Ibanez Elgonomicaly Conçu Basses EHB 5 Cordes Multi Scale Conception du corps ergonomique pour garder un équilibre parfait en position debout et assise Bord du corps confortablement arrondi Corps chambré Coupe échancrée sur le dos du corps pour un accès facile à la position haute Corps en tilleul d'Amérique Touche en érable piqué Frettes en acier inoxydable 5 pièces en érable rôti / noyer avec tiges de renfort en graphite Incrustation de points latéraux luminescents Micros Bartolini BH2 Egaliseur 3 bandes Vari-Mid avec commutateur de dérivation EQ Pont mono rail MR5HS avec selles ajustables à espacement des cordes Broches de sangle Schaller S-Locks et cric de verrouillage Neutrik Rampe amovible pour les doigts incluse Housse de protection incluse Type de manche: EHB5 Joint de col: à boulonner Matériau du manche: 5 pièces en érable grillé / noyer tiges de renfort: Tiges de renfort en graphite Finition du manche: polyuréthane satiné Épaisseur du manche (1ère frette, mm): 19,5 Épaisseur du manche (12e frette, mm): 21,5 Diapason (mm): 889 - 838 Largeur au sillet (mm): 45 Largeur d'extrémité (mm): 74 Nombre de frettes: 24 Touche: érable à œil d'oiseau rôti Rayon de touche (mm): 500 Type de frette: acier inoxydable moyen Incrustation: point décalé d'ormeau Matériel du corps: American Basswood Finition du corps: polyuréthane satiné Longueur totale (mm): 1042 Épaisseur du corps (mm): 42 Longueur du corps (mm): 517 Largeur du corps (mm): 312 Pont: MR5HS Espacement des cordes (mm): 18 Actif ou passif: actif Écrou: plastique Tête de machine: coiffes personnalisées Ibanez Couleur du matériel: noir Micro manche: Bartolini BH2 Micro chevalet: Bartolini BH2 EQ (actif): Egaliseur 3 bandes Vari-Mid Contrôles, sélecteur de micros: 1 volume, 1 équilibreur, basses, médiums, aigus, vari-mid Incrustation de points latéraux: incrustation de points latéraux luminescents Verrou de sangle: goupilles de verrouillage de sangle Schaller S-Locks Cordes spéciales: D'Addario EXL1705SL Jauges de cordes (de haut en bas): .045 / .065 / .080 / .100 / .130 Réglage (de haut en bas): 1G, 2D, 3A, 4E, 5B Étui ou sac inclus: PGPGB Autre (s) article (s) inclus: Clé hexagonale Poids net (g): 3500 | |
Q547 BLUE CHAMELEON METALLIC MATTE
Guitare électrique Ibanez Q547Manche Wizard C 5pc en érable torréfié/bubingaPour répo...(+) Guitare électrique Ibanez Q547Manche Wizard C 5pc en érable torréfié/bubingaPour répondre à la demande de différents styles de jeu, cette Manche Wizard C a une forme très neutre - elle n'est ni trop épaisse, ni trop fine, ni trop plate. La construction en 5 parties en érable torréfié/bubinga offre également une grande stabilité et une durabilité à long terme.Corps en NyatohLe bois de Nyatoh utilisé pour le corps de la guitare offre des basses et des moyennes fréquences riches.Micros R1 / Q58 S-S-HLe combo de micros R1 / Q58 est conçu spécialement pour les guitares sans tête. Ils fournissent un son clairement défini, facilitant un excellent équilibre tonal sur toutes les fréquences. Les graves sont puissants sans être boueux, et les aigus sont clairs et brillants, mais jamais durs. Par conséquent, chaque note de la structure de l'accord est bien définie et clairement audible. Ces micros, avec leur équilibre tonal et leur niveau de bruit extrêmement faible, fonctionnent très bien avec les effets numériques et analogiquesVerrouillage des cordes personnaliséCe dispositif de blocage des cordes est une unité monobloc de construction très simple. Cela signifie que l'accastillage nécessite moins d'entretien, qu'il est très résistant et qu'il permet de changer très facilement les cordes. De plus, aucune corde propriétaire n'est requise, ce qui vous permet de continuer à utiliser votre calibre et votre marque préférés.Chevalets Mono-TuneLes chevalets Mono-Tune offrent une large plage d'intonation, ce qui vous permet de régler facilement l'instrument pour descendre d'un cran ou même plus. La hauteur des cordes est également facilement réglable, et chaque sillet comporte généralement moins de matériau, ce qui permet d'obtenir un son plus naturel et plus organique.Système de commutation dyna-MIX9 avec Alter SwitchLe dyna-MIX 9 offre neuf variations de son et peut passer du mode humbucker au mode single coil d'une simple pression sur le mini interrupteur. Un mode simule même un son humbucking à partir de la combinaison de deux micros à bobine simple.Touche d'érable torréfié BirdseyeLa superbe touche en érable Birdseye confère à ce modèle un aspect exotique. La touche est traitée thermiquement pour une attaque équilibrée et un sustain riche.Frettes Jescar EVOgold Les frettes Jescar EVOgold sont connues pour leur sonorité brillante, leur superbe apparence et leurs excellentes caractéristiques telles que la durabilité à long terme et la fluidité de la flexion des notes.Design ergonomique du corpsLe corps présente un certain nombre de courbes stratégiquement placées sur le dessus et le dos de l'instrument. Cette conception complexe, mais sophistiquée, offre un confort de jeu maximal.Corps compact et léger, mais résonantBien qu'elle soit vraiment compacte et légère, son corps massif non chambré offre un son exceptionnel avec des sonorités boisées riches.Système de commutationLorsque le commutateur est en position manche, le modetwo hum tapest activé. Lorsque le sélecteur est en position chevalet, le mode Two hum tap est désactivé. Le mode Two hum tap signifie que les micros de la Manche et du milieu sont câblés en série et fonctionnent comme un humbucker. Lorsque le mode Two hum tap est désactivé et que le sélecteur de micros est en position manche, le micro manche est sélectionné. Lorsque le sélecteur est en position manche et centre, les micros manche et centre sont sélectionnés. Lorsque le sélecteur est en position centrale, la position centrale est sélectionnée. Lorsque le commutateur se trouve entre la position centrale et la position chevalet, le micro central et le côté manche du micro chevalet sont sélectionnés.Lorsque le commutateur est en position chevalet, le micro de chevalet est sélectionné. Lorsque le mode Two hum tap est activé et que le sélecteur de micro est en position manche, les micros manche et central sont sélectionnés et mis en série. Lorsque le sélecteur est en position manche et centrale, le micro manche et le côté pont du micro chevalet sont sélectionnés. Lorsque le commutateur est en position centrale, les micros du manche, du centre et du chevalet sont sélectionnés ; les micros du manche et du centre sont en mode série. Lorsque le commutateur est en position centrale et chevalet, le côté manche du micro chevalet est sélectionné. Lorsque le commutateur est en position chevalet, le micro de chevalet est sélectionné.CommandesLorsque la guitare est tenue en position de jeu, un bouton et un interrupteur se trouvent le long du bord inférieur du corps. Le sélecteur de micro à cinq positions est situé le plus près de la découpe du genou. Le bouton de tonalité est situé le plus près de l'extrémité du corps. Le bouton de volume est situé juste au-dessus du sélecteur de micro à cinq voies. Entre les boutons de volume et de tonalité se trouve le commutateur d'altération.Dimensions du mancheDiapason : 648mm/25,7 cma : Largeur : 47mm au Silletb : Largeur : 67 mm à 24Fc : Épaisseur : 20mm à 1Fd : Épaisseur : 21mm à 12FRadius : 400mmRSchéma du manche de la guitarea : Largeur du manche au niveau du silletb : Largeur du manche au niveau de la première frette.c : Épaisseur du manche à la première fretted : Epaisseur du manche à la douzième fretteRadius : Radius de la touche.Caractéristiques : Type de manche : Wizard C-7 / Manche 5pc érable torréfié/bubingatable/arrière/corps : corps Nyatohtouche : érable torréfié Birdseye / incrustation de nacre à points décalésfrettes : frettes Jumbo JESCAR EVOgold nombre de frettes : 24chevalet : chevalet Ibanez Mono-Tuneespace entre les cordes : 10.8mmmicro manche : R1-7 (S) micro manche (passif/céramique)Micro intermédiaire : R1-7 (S) micro intermédiaire (passif/céramique)micro chevalet : Q58-7 (H) micro chevalet (passif/céramique)accordage d'usine : 1E,2B,3G,4D,5A,6E,7BCordes : D'Addario® XL110-7calibre des cordes : .010/.013/.017/.026/.036/.046/.059couleur de l'accastillage : Cosmo BlackVerrouillage des cordes Ibanez Customsystème de commutation dyna-MIX9 avec commutateur d'altérationincrustation de points latéraux luminescentshousse de transport incluseEtui recommandé : MR350C | |
Ibanez : EHB1005SMS-MGM (5 commentaires)
5 cordes- Corps en tilleul- Manche vissé en érable torréfié/noyer- Touche en érable m...(+) 5 cordes- Corps en tilleul- Manche vissé en érable torréfié/noyer- Touche en érable moucheté torréfié- Profil du manche: EHB5- Repères "points décalés" en abalone- 24 frettes Medium en acier inoxydable- Sillet en plastique- Largeur au sillet: 45 mm (1,77")- Diapason: 762 - 812 mm (30" - 31,97")- Rayon de la touche: 500 mm (19,69")- 2 micros Bartolini BH2- EQ 3 bandes Vari-mid- Contrôles: Volume, Balance, Bass, Middle, Treble- Commutateur EQ Bypass- Chevalet MR5HS- Accastillage noir- Mécaniques Ibanez Custom- Cordes .045 - .130- Couleur: Metallic Gray Matte- Livrée en housse | |
EHB1005SMS METALLIC GRAY MATTE
Basse électrique Ibanez EHB1005SMSComparaison des taillesConception ergonomique du corpsL...(+) Basse électrique Ibanez EHB1005SMSComparaison des taillesConception ergonomique du corpsLa construction sans tête de l'EHB et son corps spécialement conçu permettent au joueur de conserver une position de jeu similaire, qu'il soit assis ou debout.Dos du corps inclinéLa moitié supérieure de l'arrière du corps est inclinée, ce qui permet à la basse de reposer légèrement plus près du corps du joueur pour un meilleur contrôle et une sensation plus ergonomique.Bord de corps confortablement arrondi, Corps chambréSon design profilé et ergonomique et son corps chambré en font un instrument léger, bien équilibré et confortable, excellent pour les longues sessions de jeu ou de pratique.Découpe du dos du corpsL'arrière du corps a été sculpté derrière la corne inférieure pour faciliter l'accès aux frettes supérieures.Manche 5 pièces en érable torréfié et noyer avec tiges de renfort en graphite.L'érable torréfié du manche est traité thermiquement pour augmenter la stabilité, la durabilité, la résistance à l'humidité et la tolérance aux changements de température.Incrustations de points latéraux luminescentsL'incrustation luminescente des points latéraux permet une bonne visibilité dans les environnements sombres.Égaliseur 3 bandes Vari-Mid avec commutateur de dérivation d'égalisationL'égaliseur 3 bandes Vari-Mid dispose d'un contrôle variable des fréquences moyennes qui vous permet d'obtenir une gamme de sons incroyablement large. Il y a également un commutateur de dérivation de l'égaliseur pour un fonctionnement passif, le contrôle des aigus agissant comme un contrôle de tonalité passif lorsque l'égaliseur est dérivé.Chevalet mono rail MR5HS avec sillets réglables en fonction de l'espacement des cordes.Le chevalet MR5HS est conçu spécialement pour les basses EHB et présente une large plage d'intonation. Chaque pièce du chevalet est fixée indépendamment et solidement au corps pour un transfert maximal des vibrations, et les sillets sont réglables pour un espacement des cordes de +/-1,5 mm, répondant ainsi aux exigences individuelles de chaque bassiste en matière d'espacement des cordes, quel que soit son style de jeu. Des rondelles en téflon sont utilisées sur chaque accordeur pour un accordage en douceur.Goupilles de sangle Schaller S-Locks et jack de verrouillage NeutrikLes goupilles de verrouillage des sangles Schaller S-Lock et le jack de verrouillage Neutrik maintiennent la sangle et le câble en toute sécurité.Rampe pour doigts détachableUne rampe de doigts détachable est incluse pour une utilisation confortable des doigts.CommandesLorsque la basse est en position de jeu, il y a deux boutons empilés vers l'extrémité du corps, près de la prise d'entrée. La commande supérieure des boutons empilés les plus proches du bord inférieur du corps est l'accentuation/la réduction des aigus, et le bouton inférieur est l'accentuation/la réduction des basses. La commande supérieure de la pile située près du mini-commutateur est l'amplification/la coupure des médiums, et le bouton inférieur est le balayage de la fréquence moyenne.Il y a deux petits boutons le long du bord inférieur du corps. Le bouton le plus proche du manche est le bouton de volume, et le bouton entre le contrôle de volume et les boutons empilés est l'équilibreur de micro. Au-dessus de ces boutons se trouve le bypass de l'égaliseur. Lorsque le commutateur est en position manche, l'égaliseur est désactivé. Lorsque le commutateur est en position chevalet, l'égaliseur est activé. Lorsque l'égalisation est désactivée, le bouton d'amplification/coupe des aigus fonctionne comme un contrôle de tonalité passif.Réponse en fréquenceLa courbe de fréquence de l'amplification/coupure des graves présente un pic à environ 20 Hz, la largeur variable devient plus petite à mesure qu'elle va vers les aigus, et la largeur variable devient nulle à environ 1000 Hz. La plage variable de la fréquence de crête est d'environ ±20 dB. La courbe de fréquence d'amplification/coupe des aigus dessine une courbe avec une crête à environ 20000 Hz et une largeur variable de zéro près de 100 Hz.La plage variable de la fréquence de crête est d'environ ±20 dB. La courbe de fréquence d'accentuation/de coupure des médiums dessine une courbe en forme de cloche avec un pic à une fréquence spécifique, et la plage variable devient nulle près de 20 Hz et autour de 10 000 Hz. La fréquence de crête varie d'environ 100 Hz à environ 6000 Hz. La plage variable de la fréquence de crête est d'environ ±15 dB.Dimensions du mancheDiapason : 812mm/32- 762mm/30a : Largeur : 45mm au Silletb : Largeur : 74 mm à 24Fc : Épaisseur : 19,5mm à 1Fd : Épaisseur : 21,5mm à 12FRadius : 500mmRSchéma du manche de la guitarea : Largeur du manche au niveau du silletb : Largeur du manche au niveau de la première frette.c : Épaisseur du manche à la première fretted : Epaisseur du manche à la douzième fretteRadius : Radius de la touche.Caractéristiques : Type de manche : EHB5 / 5pc Manche en érable torréfié/noyer avec tiges de renfort en graphitetable/arrière/corps : Corps en tilleul américaintouche : érable Torréfié Birdseye incrustation abalone à points décalésfrettes : en acier inoxydable de taille moyenneNombre de frettes : 24chevalet : MR5HSespace entre les cordes : 18 mmmicro manche : Bartolini® BH2 (passif)micro chevalet : Bartolini® BH2 (Passif)égaliseur : Vari-mid 3 bandes avec interrupteur de dérivation de l'égaliseur (contrôle passif de la tonalité sur le potard des aigus)accordage d'usine : 1G,2D,3A,4E,5BCordes : D'Addario® EXL170-5SLTirant des cordes : .045/.065/.080/.100/.130Couleur de l'accastillage : NoirCasques personnalisés IbanezRampe de doigts détachableGoupilles de verrouillage des sangles Schaller S-LocksPoints latéraux luminescentsGig Bag inclusHousse recommandée : MRB500C | |
Fender : American Custom Strat RW C3CSB
Custom Shop- Corps en frêne sélectionné- Manche en érable moucheté AA torréfié- Tou...(+) Custom Shop- Corps en frêne sélectionné- Manche en érable moucheté AA torréfié- Touche en palissandre foncé- Profil du manche: C ovale des années 60- Rayon de la touche: 9,5" - 12"- 22 frettes 6150- Sillet en os- Repères "points" en nacre- 3 micros simple bobinage Custom Shop 64 Strat bobinés à la main (micro central RWRP)- Pickguard 3 plis vert menthe- Sélecteur 5 positions- 1 réglage de volume- 2 réglages de tonalité- Câblage Vintage Mod #2- Vibrato C/S Vintage- Mécaniques Sperzel Deluxe avec boutons Perloïd- Accastillage nickelé- Guide cordes- Couleur: 3 Color Sunburst- Etui Custom Shop et certificat d'authenticité incl.- Fabriquée aux USA | |
Coffret Carton Avec 5 Appeaux Manuels
Coffret de 5 appeaux : Poule d'eau - Grive musicienne - Moineau - Rossignol - CanardFabric...(+) Coffret de 5 appeaux : Poule d'eau - Grive musicienne - Moineau - Rossignol - CanardFabrication française. Qualité : vernis alimentaire. Bois : buis/hêtre. Ce coffret est livré avec une fiche explicative des 5 appeaux : une photo des oiseaux, une découverte détaillée des oiseaux (leur environnement, leur mode de vie, leur chant...) et les conseils d'utilisation des appeaux. Produit soumis à un droit de rétractation spécifiqueCe produit, pour raison d’hygiène, si il a été ouvert, devra être exempt de toutes traces d’utilisations pour rentrer dans le cadre d’une rétractation et prétendre à être remboursé ou échangé. | |
PRS (Paul Reed Smith) : S2 10th Anniv. Custom 24 LB
PRS S2 10th Anniv. Custom 24 LB Ltd; DC-Style Electric Guitar; Body: Mahogany (Swietenia M...(+) PRS S2 10th Anniv. Custom 24 LB Ltd; DC-Style Electric Guitar; Body: Mahogany (Swietenia Macrophylla); Neck: Cuban Mahogany; Fingerboard: Rosewood (Dalbergia Latifolia) ; Neck Mount: Set; Neck Shape: Pattern Thin; Inlays: Mother Of Pearl Birds; 24 frets; Nut Width: 42,9 mm (1,6875"); Scale: 635 mm (25"); Fingerboard Radius: 254 mm (10"); Pickups: PRS 85/15 (Made In USA) (Bridge), PRS 85/15 (Made In USA) (Neck); Controls: 1 Volume, 1 Tone; Switch: 5-Way; Tremolo: PRS Patented Tremolo; Hardware Finish: Nickel; Tuners: PRS Low Mass Locking; incl. Gig Bag; Colour: Lake Blue; Stock Strings: PRS Signature Strings 010-046 RL; Made in USA | |
PRS (Paul Reed Smith) : Custom 24 CB 10 Top
Corps en acajou- Table 10 Top en érable flammé- Manche en acajou flammé- Profil du manc...(+) Corps en acajou- Table 10 Top en érable flammé- Manche en acajou flammé- Profil du manche mince- Diapason: 635 mm- Touche en palissandre- 24 frettes- Repères "oiseaux" en nacre- 2 micros double bobinage 85/15 sans capots- 1 réglage de volume- 1 réglage de tonalité- Sélecteur 5 positions- Vibrato PRS Gen III- Mécaniques bloquantes PRS Phase III- Accastillage hybride- Finition: Vernis nitrocellulosique- Couleur: Charcoal Burst- Livrée en étui PRS- Fabriquée aux USA | |
PRS (Paul Reed Smith) : Custom 24 YI
Corps en acajou- Table en érable flammé- Manche en acajou flammé- Profil du manche minc...(+) Corps en acajou- Table en érable flammé- Manche en acajou flammé- Profil du manche mince- Diapason: 635 mm- Touche en palissandre- 24 frettes- Repères "oiseaux" en nacre- 2 micros double bobinage 85/15 sans capots- 1 réglage de volume- 1 réglage de tonalité- Sélecteur 5 positions- Vibrato PRS Gen III- Mécaniques bloquantes PRS Phase III- Accastillage hybride- Finition: Vernis nitrocellulosique- Couleur: Yellow Tiger- Livrée en étui PRS- Fabriquée aux USA | |
Ibanez Prestige Rg5120m-fcn Frozen Ocean
Nombre de cordes: 6 Type de cou: Super Wizard HP Articulation du cou: à visser Matéri...(+) Nombre de cordes: 6 Type de cou: Super Wizard HP Articulation du cou: à visser Matériau du cou: 5pc Maple / Wenge Finition du cou: Polyuréthane satiné Epaisseur de manche (1ère frette, mm): 17 Epaisseur de manche (12ème frette, mm): 19 Échelle (pouces): 25,5 Échelle (mm): 648 Largeur de noix (mm): 43 Largeur finale (mm): 58 Nombre de frettes: 24 Touche: Érable Birdseye Bound Rayon de touche (mm): 430 Type de frette: Acier inoxydable Jumbo Traitement Fret Edge: Traitement Prestige Fret Edge Incrustation: point nacré décalé Matériau du corps (pour le solide): cendre Matériau du corps (pour les solides): Acajou d'Afrique Finition du corps: Polyester brillant Longueur totale (mm): 984 Epaisseur du corps (mm): 44 Longueur du corps (mm): 452 Largeur du corps (mm): 311 Pont: Lo-Pro Edge Espacement des cordes (mm): 10,8 Actif ou passif: Actif Écrou: Verrouillage Tête de machine: têtes de machine Gotoh® Couleur du matériel: Cosmo noir Micro-tête: Fishman® Fluence Moderne Humbucker Céramique (H) Micro pont: Fishman® Fluence Moderne en Céramique Humbucker (H) Commandes, sélecteur de pick-up: 1 volume, 1 tonalité, commutateur à levier à 3 directions Autres commutateurs: commutateur Fishman® Fluence Voicing Incrustation de points latéraux: points latéraux Luminlay Jauges à cordes (de haut en bas): .009 / .011 / .016 / .024 / .032 / .042 Cordes spéciales: D'Addario® EXL120 Réglage (de haut en bas): 1E, 2B, 3G, 4D, 5A, 6E Recommander le cas ou le sac: Hardshell cas inclus Autre (s) article (s) inclus: Bras de trémolo, Outil multiple, Clé hexagonale Longueur du paquet (mm): 1130 Largeur du paquet (mm): 428 Hauteur de l'emballage (mm): 147 Poids du colis (kg): 10,4 Poids net (kg): 3,5 Nombre de cordes: 6 Type de cou: Super Wizard HP Articulation du cou: à visser Matériau du cou: 5pc Maple / Wenge Finition du cou: Polyuréthane satiné | |
PRS (Paul Reed Smith) : Custom 24 10 Top 71
PRS Custom 24 10 Top Cobalt Smokeburst, electric guitar, mahogany body (Khaya ivorenses),...(+) PRS Custom 24 10 Top Cobalt Smokeburst, electric guitar, mahogany body (Khaya ivorenses), 10 Top flamed maple top, mahogany neck (Swietenia Macrophylla), pattern thin neck shape, 635 mm scale, palisander fretboard (dalbergia latifolia), 24 frets, mother of pearl birds fretboard inlays, 2x uncovered 85/15 humbucker, 1x volume control, 1x tone control, 5 - way blade switch, PRS Gen III Tremolo, PRS Phase III Locking tuners, hybrid hardware, colour: Cobalt Smokeburstt, incl. PRS case, made in USA; serial no: 0346613 | |
IBANEZ EHB1006MS MGM METALLIC GRAY MATTE
Ibanez - Basse électrique EHB1006MS - Metallic Gray MatteConception ergonomique du corpsL...(+) Ibanez - Basse électrique EHB1006MS - Metallic Gray MatteConception ergonomique du corpsLa construction sans tête de l'EHB et son corps spécialement conçu permettent au joueur de conserver une position de jeu similaire, qu'il soit assis ou debout.Dos du corps inclinéLa moitié supérieure du dos du corps est inclinée, ce qui permet à la basse de reposer légèrement plus près du corps du joueur pour un meilleur contrôle et une sensation plus ergonomique.Bord du corps confortablement arrondi, corps chambréSon design profilé et ergonomique et son corps chambré en font un instrument léger, bien équilibré et confortable qui est excellent pour les longues sessions de jeu ou de pratique.Coupe Scooped sur le dos du corpsL'arrière du corps présente une découpe supplémentaire derrière la corne inférieure pour faciliter l'accès aux frettes supérieures.Manche 5 pièces en érable torréifié/noyer avec tiges de renfort en graphite.L'érable torréfié du manche est traité thermiquement pour augmenter la stabilité, la durabilité, la résistance à l'humidité et la tolérance aux changements de température.Incrustations de points latéraux luminescentsLes incrustations luminescentes des points latéraux offrent une bonne visibilité dans les environnements sombres.Micros T1Le micro T1 est un humbucker doté de deux bobines séparées, montées individuellement, qui offre une réponse ferme dans les basses, des moyennes fréquences percutantes et des hautes fréquences claires. Il offre un voicing flexible adapté à différents genres, et la hauteur de chaque bobine peut être réglée individuellement pour des ajustements très nuancés de la tonalité. En plus de son excellent son, le design physique présente des bords arrondis pour un confort ergonomique accru lorsque le micro est utilisé comme repose-pouce. De plus, les bobines montées individuellement permettent de les positionner de manière légèrement décalée les unes par rapport aux autres. Ainsi, la surface du micro où le joueur pose son pouce est directement parallèle aux cordes, ce qui n'est pas le cas de la plupart des basses à plusieurs gammes. Cette conception améliore considérablement le confort et la jouabilité de l'instrument.Égaliseur 3 bandes Vari-Mid avec interrupteur de dérivation de l'égalisation (EQ)L'égaliseur 3 bandes Vari-Mid dispose d'un contrôle variable des fréquences moyennes qui vous permet d'obtenir une gamme de sons incroyablement large. Il y a également un commutateur de dérivation de l'égaliseur pour un fonctionnement passif, le contrôle des aigus agissant comme un contrôle de tonalité passif lorsque l'égaliseur est dérivé.Chevalet mono rail MR5HS avec sillets réglables en fonction de l'espacement des cordesLe chevalet MR5HS est conçu spécialement pour les basses EHB et offre une large plage d'intonation. Chaque pièce du pont est fixée indépendamment et solidement au corps pour un transfert maximal des vibrations, et les selles sont réglables pour un espacement des cordes de +/-1,5 mm, répondant ainsi aux exigences individuelles de chaque bassiste en matière d'espacement des cordes, quel que soit son style de jeu. Des rondelles en téflon sont utilisées sur chaque accordeur pour un accordage en douceur.Broches de sangle Schaller S-Locks et jack de verrouillage NeutrikLes goupilles de blocage de courroie Schaller S-Lock et la prise de verrouillage Neutrik maintiennent la courroie et le câble en toute sécurité.Rampe de doigts détachableUne rampe de doigts détachable est incluse pour une prise en main confortable.Caractéristiques :Type de manche : manche EHB65pc en érable rôti/noyer avec tiges de renfort en graphitetable/arrière/corps : tilleul américaintouche : érable Birdseye rôti avec incrustation de points d'abalone décaléefrettes : frettes moyennes en acier inoxydablenombre de frettes : 24chevalet : MR5HSespace entre les cordes : 17mmmicros manche : T1 micros manchePassifmicro de chevalet : T1 micro de chevaletPassifégaliseur : Vari-mid 3-band EQ w/ EQ bypass switch (contrôle de tonalité passif sur le potard des aigus)accordage d'usine : 1C,2G,3D,4A,5E,6BCordes : D'Addario® EXL170-5SL + .032tirant des cordes : .032/.045/.065/.080/.100/.130Accastillage : NoirDimensions du mancheDiapason : 889mm/35- 825,5mm/32,5a : Largeur 54 mm au silletb : Largeur 87 mm à 24Fc : Epaisseur 19,5 mm à 1Fd : Epaisseur 21,5 mm à 12FRadius : 950 mmRContrôles | |
PRS (Paul Reed Smith) : Pauls Guitar S/H Private Stock
Semi-Hollow- Corps en acajou flammé- Table en érable flammé- Manche en acajou- Touche e...(+) Semi-Hollow- Corps en acajou flammé- Table en érable flammé- Manche en acajou- Touche en érable flammé/blackwood- Rayon de la touche: 25,4 mm- Repères "oiseaux de plume"- Diapason: 635 mm- 22 frettes- 2 micros double bobinage Paul's TCI- 1 réglage de volume- 1 réglage de tonalité- Sélecteur de micro 3 positions- 2 commutateurs miniatures pour Coil Tap- Chevalet/cordier PRS- Mécaniques bloquantes PRS Phase III- Couleur: McCarty Glow- Livrée en étui- Fabriquée aux USA | |
PRS (Paul Reed Smith) : Custom 24/08 PS Tiger Eye
PRS Custom 24/08 Private Stock Tiger Eye; electric guitar; curly maple top, from the Priva...(+) PRS Custom 24/08 Private Stock Tiger Eye; electric guitar; curly maple top, from the Private Stock vault; swamp ash body; curly maple neck; Ziricote fingerboard; Pattern Thin neck profile; inlays: abalone ‘birds’, with mother-of-pearl outlines; PRS TCI pickups (neck and bridge position); controls: 1x volume, 1x tone; switches: 3-way, 2x miniswitches for coil tap; smoked black PRS Gen III tremolo; PRS Phase III locking tuners; incl: PRS private stock brown leather case and certificate; finish: high-gloss nitro; colour: tiger eye; made in USA | |