| Kemper : Profiler Stage Bundle 1
Kemper Profiler Stage Kemper Profiler Stage Thon Case Kemper Prof. Stage + EP1 Combination...(+) Kemper Profiler Stage Kemper Profiler Stage Thon Case Kemper Prof. Stage + EP1 Combination of Kemper Profiler guitar amplifier and Profiler Remote foot controller in one pedalboard-
Complete Profiler with the same functions and legendary sound of the well-known Profiler Head-
The combination allows you to control, manage and program performances, as well as rig switches and complex parameter morphs-
Backlit display that is easy to read even in sunlight-
Dimensions (W x D x H): 47 x 26 x 8.5 cm-
Weight: 4,6 kg-
Matching case: Art.471009 (not included in delivery) Mission Engineering EP1-KP-GN Input: 6.3 mm jack-
Return 1-4: 4x 6.3 mm stereo jack-
Main Out L & R: 2x XLR / 6.3 mm jack-
Monitor Out L & R: 2x 6.3 mm jack-
Send 1 & 2: 2x 6.3 mm jack-
Footswitch/Exp Pedal 1-4: 4x 6.3 mm stereo jack-
Headphone Out: 3.5 mm stereo jack-
MIDI In/Out/Thru-
S/PDIF In/Out-
USB |
|
| Palmer : Pocket Amp Bass
(94 comments)
- For practicing, recording and performing- For active and passive basses- 3 Sound modes: ...(+) - For practicing, recording and performing- For active and passive basses- 3 Sound modes: Clean, Overdrive and Fuzz- 3-Band equalizer which has been specifically tuned for bass guitar and with semi-parametric mid control- Output DI or with speaker emulation- Effects loop- Controls: Bass, Mid Level, Mid Freq, Highs, Drive, FX Blend, Saturate and Volume- Connections: Bass input with pad switch, headphones, AUX In, Bass Thru, XLR DI Out, Amp Out with ground lift, FX insert- Aluminium diecast housing- Powered with optional 9V battery or 9V DC power supply (e.g., Article Nr 409939 - not included) |
|
| Behringer : V-Tone Bass BDI21
(556 comments)
- Effect pedal with direct record output- V-TONE modelling simulates the sound of famous v...(+) - Effect pedal with direct record output- V-TONE modelling simulates the sound of famous vintage tube amps as well as slap and distortion sounds in any combination- Can be used either as a direct recording preamp with speaker simulation or as an active standard DI box- Outputs: 6.3 mm mono jack and balanced, gold-plated XLR connector- Ground lift switch- Operation via 9 V battery or DC adapter (not included) |
|
| Two Notes : ReVolt Bass Preamp
- 3 Channels- Fully analogue preamp & bass amp simulator- Inspired by the sound of three l...(+) - 3 Channels- Fully analogue preamp & bass amp simulator- Inspired by the sound of three legendary bass amps - Classic Clean, Vintage Dirt & Modern Drive- 12AX7 preamp tube in high voltage mode provides warmth and bite- Integrated dry/wet blend- Analogue cab sim for live DI & recording- FX Loop and MIDI In/Out for easy integration into existing setups- Includes 10 Series-G DynIR cabinet captures inspired by leading guitar amp brands- Controls: DI Out Volume - Classic Clean: Gain, Volume, Bass, Treble - Vintage Dirt: Gain, Volume - Modern Drive: Gain, Volume - Crunch & Lead: Boost, Bass, Middle, Treble- Effect loop-in: Serial- Input: 6.3 mm jack- Output: 6.3 mm jack- FX Send & Return: 2x 6.3 mm jack- DI Out: XLR- Aux In: 3.5 mm stereo jack- MIDI In & Out- Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside- Power consumption: 500 mA- Power supply with 12 V DC mains adapter (included)- Dimensions (W x D x H): 192 x 117 x 72 mm- Weight: 0.75 kg |
|
| Sadowsky : SBP-1 - Bass Preamp / DI
(9 comments)
- Sadowsky SBP-1 - Bass Preamp / DI, bass preamp / EQ / DI effects pedal, offers the same ...(+) - Sadowsky SBP-1 - Bass Preamp / DI, bass preamp / EQ / DI effects pedal, offers the same quality Sadowsky electronics that are built into Sadowsky basses, boost only EQ section for Bass and Treble, switchable mute for the instrument, DI output to connect the pedal directly into a PA or recording console, Bass + 18 dB boost at 40 Hz, Treble + 18 dB boost at 4 kHz, true bypass, controls for Volume, Treble, Bass, Ground Lift switch, bypass footswitch (On / Off), Mute footswitch, status LEDs, metal housing, 6.3 mm mono in / output jacks, 6.3 mm mono tuner output, XLR out (DI), power supply via 9V battery or optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center, current draw 11 mA, dimensions (L x W x H) 106 x 107 x 61 mm / 4.17" x 4.21" x 2.4", weight ca. 780 g / 1.72 lbs |
|
| Markbass : Mark Vintage Pre
(13 comments)
- Tube preamp from the Markbass Vintage top- 4-Band EQ- Controls: Gain, Master, Drive, Low...(+) - Tube preamp from the Markbass Vintage top- 4-Band EQ- Controls: Gain, Master, Drive, Low, High, Blend- Switch: Flat / Normal / Old, sample rate- Footswitch: Drive, On, Boost- Tube: 12AX7 (ECC 83)- Dimensions (W x D x H): 193 x 127 x 59 mm- Weight: 840 g- Includes power supply unit (12 V DC, 300 mA)- Input for electric bass: 6.3 mm jack- Output: 6.3 mm jack- FX loop send / return: 2x 6.3 mm jack- Line Out: XLR- Digital: Toslink, RCA |
|
| Darkglass : Alpha-Omega
(85 comments)
- Preamp / distortion- Controls: Blend, Level, Drive, Mod, Bass, Mid, and Treble- Switch: ...(+) - Preamp / distortion- Controls: Blend, Level, Drive, Mod, Bass, Mid, and Treble- Switch: Growl and Bite- XLR DI output- Power consumption: 30 mA- Power supply with 9 V battery or via 9 V DC power supply (2.1 mm x 5.5 mm power connection, polarity (-) inside, not included in delivery, e.g. Art. 409939)- Dimensions (W x D): 120 x 107 mm- Made in Finland |
|
| Tech 21 : SansAmp Character VT Bass DI
(120 comments)
- Character series- Bass preamp pedal- 3 Outputs: Amp / Recording output with Speaker Simu...(+) - Character series- Bass preamp pedal- 3 Outputs: Amp / Recording output with Speaker Simulation / DI output- 3-Band EQ- Power supply via 9V battery or with power supply (not included) suitable power supply: e.g. 409939- Dimensions: 12 x 14.5 x 6 cm- Weight: 0.45 kg |
|
| Ampeg : Classic Analog Bass Preamp
(84 comments)
- Analog bass preamp- Wide range of authentic Ampeg sounds- 3-band equalizer- True bypass-...(+) - Analog bass preamp- Wide range of authentic Ampeg sounds- 3-band equalizer- True bypass- Metal housing- Power supply using 9 V battery or 9 V power supply (not included, suitable power supply available under Article Nr 409939)- Dimensions: 11.4 x 6.6 x 5.6 cm- Weight: 272 g |
|
| Darkglass : Vintage Ultra v2 Aux
(8 comments)
- Bass overdrive- New additional features over the first version: individual user-loadable...(+) - Bass overdrive- New additional features over the first version: individual user-loadable speaker simulation Impulse Response, micro-USB B connection for connection to a PC / Mac, 3.5 mm headphone output with speaker simulation, balanced XLR output with switchable speaker simulation- Controls: Drive, Level, Blend, Master, Treble, Hi Mids, Lo Mids, Bass- Snap fasteners: Cab Sim, Ground Lift- Switch: Attack, Grunt, Lo Mids (500 Hz / 1 kHz / 250 Hz), Hi Mids (1.5 kHz / 3 kHz / 750 Hz)- LED: Effect On, Distortion- Footswitch: Effect bypass, distortion- Input: 6.3 mm jack- Output: 6.3 mm jack- Direct output: XLR- Aux input: 3.5 mm jack- Headphone output: 3.5 mm jack- Power supply connection (coaxial connector 5.5 x 2.1 mm - negative polarity inside)- Power consumption: 110 mA- Power supply via 9 V DC power pack (not included, suitable power pack: Art.409939)- True bypass- Dimensions (W x D x H): 120 x 107 x 57 mm- Weight: 430 g- Made in Finland |
|
| Darkglass : Alpha Omega Ultra V2
(12 comments)
- Preamp with additional Aux In- 2 Distortion circuits- High dynamic range- Active 6-band ...(+) - Preamp with additional Aux In- 2 Distortion circuits- High dynamic range- Active 6-band graphic EQ- True bypass- Headphone output- Balanced direct output with switchable digital impulse response speaker emulation- Controls: Mod, Blend, Level, Drive, 6-Band EQ- Push buttons: Growl, Bite, Ground Lift, Cab Sim- LED: Effect On / Off- Footswitch: Effect bypass- AC adapter: coaxial connector 5.5 x 2.1 mm, negative polarity inside- Current consumption: 30 mA- Power supply via 9 V DC power pack (not included - suitable power pack: Art.409939)- Dimensions (W x D x H): 125 x 57 x 96 mm- Weight: 430 g |
|
| MXR : M 81 Bass Preamp
(53 comments)
- Separate controls for input and output- Parametric mids- Pre / Post switch determines wh...(+) - Separate controls for input and output- Parametric mids- Pre / Post switch determines whether the EQ will take effect before or after the Direct Out- Controls for Output, Mid Freq., Input, Bass, Mid and Treble- Pressure switch for ground lift- 2 Internal switches control the use of the Direct Out and a True Bypass can be switched- Status LED- 6.3 mm Jack inputs and output- XLR output- Operates on 9V battery or optional AC adapter (article nr 409939, not included) |
|
| Trace Elliot : Multipedal TRANSIT-B
(18 comments)
- Backlit controls- Passive/ active switch- Pre-shape switch for classic trace sound- 5-Ba...(+) - Backlit controls- Passive/ active switch- Pre-shape switch for classic trace sound- 5-Band EQ- Drive effect- Dual band compressor- Mute/ tune switch- Input/ output level knob- Line output- Instrument level output- DI Output pre- DI Output post- Ground lift switch- AUX input- Headphone output- Weight: 1.18 kg- Incl. carrying case and power supply |
|
| Aguilar : Tone Hammer
(90 comments)
- Typical aguilar sound in a compact format- Foot-switchable 3-band EQ with parametric mid...(+) - Typical aguilar sound in a compact format- Foot-switchable 3-band EQ with parametric mids, bass, treble, gain and master volume- AGS (Adaptive Gain-Shaping) additional gain for more drive and rock character- Foot switchable- DI-out either pre- or post-EQ- Ground lift- Power supply via 2x 9 V battery, phantom power supply or power supply (not included)- Suitable power supply: Art. 217879 (not included) |
|
| Tech 21 : SH1
(12 comments)
- Steve Harris (Iron Maiden) signature pedal- 2 Channel modes with independent gain and vo...(+) - Steve Harris (Iron Maiden) signature pedal- 2 Channel modes with independent gain and volume controls- Completely analogue SansAmp technology- Active 4-Band EQ- ±18 dB boost or cut- Integrated chromatic tuner- Integrated speaker simulation- Controls: 2x Volume, Blend, High, Low, Mid 2, Mid 1 Comp, 2x Gain- Switch: XLR, Speaker Simulation, Bite (Boost)- Foot switch: Channel 1/2, on and tuner- XLR DI output- Input: 6.3 mm jack with 4.7 MOhm- Output: 6.3 mm jack with low impedance- Sturdy metal housing, metal switch and socket- Dimensions (L x W x H): 19.7 x 6.3 x 3.2 cm- Includes 9 V DC universal power adapter #DC9 with automatic switchover to 100 V / 240 V, 200 mA |
|
| Orange : Bass Butler
(11 comments)
- 2 channels- Channel 1 (always-on): Bass channel with control for compression, bass, treb...(+) - 2 channels- Channel 1 (always-on): Bass channel with control for compression, bass, treble and volume- Channel 2 (switchable): Guitar channel with controls for gain, bass, middle, treble and volume- Balanced XLR DI-Out with bass cab / guitar cab simulation for each channel- Mix output without simulation- Input for expression pedal- Ground lift switch- Power supply: 18 V DC adapter- Dimensions (W x H x D): 17.0 x 8.5 x 16.5 cm- Weight: 1.3 kg- Colour: Black- Made in UK |
|
| Tech 21 : DI-2112 Geddy Lee Signature
(2 comments)
- Two completely analogue SansAmp circuits with individual volume controls- Drive potentio...(+) - Two completely analogue SansAmp circuits with individual volume controls- Drive potentiometer for gain and overdrive- Emulated tube saturation for massive low-end bass sounds with separate volume control- Blend control for the ratio between the SansAmp tube amplifier emulation and the direct instrument signal- Semi-parametric EQ adjustable between 170 Hz and 3.0 kHz with cut / boost of up to 12 dB- Tight switch for a more defined sound- 1 MOhm jack input- Low-impedance XLR outputs with level switch and ground lift for problem-free DI operation- Two jack outputs with level switch- Controls: Level 1, Blend, Mid, Drive, Treble, Bass, Mid-Shift, Level 2, Saturation- Switch: GND, -20 dB / + 10 dB, Tight, Mute- Status LED- Solid metal housing- Power supply via 18 V DC mains adapter for more headroom and clarity, 9 V mains adapter or 2 alkaline 9 V batteries (not included, suitable 18 V power supply: Art.333473)- Dimensions (W x D x H): 162 x 102 x 44 mm- Weight: 540 g- Input: 6.3 mm jack- Tuner Out: 6.3 mm jack- Drive out: 6.3 mm jack- Deep Out: 6.3 mm jack- Deep Out: XLR- Drive Out: XLR- Power supply connection: coaxial connector 5.5 x 2.1 mm (negative polarity inside) |
|
| Nux : Melvin Lee Davis Bass Preamp
(17 comments)
- Melvin Lee Davis Signature Bass Preamp + DI- Offers sound-shaping controls such as 3-ban...(+) - Melvin Lee Davis Signature Bass Preamp + DI- Offers sound-shaping controls such as 3-band EQ with mid-frequency selection, drive with blend control, speaker simulation (impulse response loader) and integrated noise reduction with decay and threshold controls- 1 Channel- Controls: Volume, Blend, Drive, Bass, Middle, Freq, Treble- Switches: Di, Out, Pre/Post, Lift/Gnd- Input: 6.3 mm jack- AUX input: 3.5 mm jack- Headphone jack: 3.5 mm stereo jack- Through: 6.3 mm jack- Output: 6.3 mm jack- DI Out- Micro USB- Power supply via 9 V DC mains adapter (2.1 mm x 5.5 mm barrel connector, polarity (-) inside, not included in delivery)- Current consumption less than 150 mA- Dimensions (W x D x H): 115 x 105 x 58 mm- Weight: 460 g |
|
| Darkglass : Harmonic Booster 2.0 Bass Pre
(31 comments)
- A clean preamp that amplifies attack and presence while shaping the mid-range for a very...(+) - A clean preamp that amplifies attack and presence while shaping the mid-range for a very percussive and aggressive character- With a sound circuit that can be controlled with the character knob- An active 3-band equalizer with semi-parametric midpoints- Suitable as a supplement to distortion pedals as well as a stand-alone bass preamplifier- Controls: Boost, Character, Mid Gain, Mid Freq, Bass, Treble- LED: Effect On- Foot-switch: Bypass effect- Input: 6.3 mm Jack- Output: 6.3 mm Jack- Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, minus pole inside- Power supply with a 9 V DC mains adapter (not included - suitable mains adapter: Article Nr. 409939)- Dimensions (W x D x H): 64 x 111 x 43 mm- Weight: 250 g- Made in Finland |
|
| Electro Harmonix : Battalion
(54 comments)
- Bass Preamp / DI- Compact, flexible DI pedal with switchable distortion, which offers po...(+) - Bass Preamp / DI- Compact, flexible DI pedal with switchable distortion, which offers powerful sound shaping possibilities for bass- XLR DI Out- Also suitable for headphones, a 6.3 mm output jack plus a hard-wired 6.3 mm dry output jack- Controls: Gate, Vol, Bass, Lo Mid, Hi Mid, Treble, Compression, Level, Blend, Drive, Tone, DI Volume- Switch: Distortion Position, Ground Lift, Bypass, 10 dB Pad- Footswitch: Bypass, distortion- True Bypass- Power supply with an EHX9.6DC-200 mA power supply (included)- Dimensions: (W x D x H): 121 x 146 x 64 mm |
|
BASS
