| Dreadbox : Hysteria
Dreadbox Hysteria; Eurorack module; analog VCO; frequency range from 16Hz to 32,000Hz; qua...(+) Dreadbox Hysteria; Eurorack module; analog VCO; frequency range from 16Hz to 32,000Hz; quantizer with two modes; Hard Sync input; separate pulse output; blends seamlessly between all waveforms ; CV input for pulse width modulation and waveform; power consumption: 114mA (+12V) / 46mA (-12V); width: 10 HP; depth: 35 mm |
|
| Behringer : 921B
Behringer 921B Oscillator; Eurorack module; analog VCO / LFO; octave switch and fine-tunin...(+) Behringer 921B Oscillator; Eurorack module; analog VCO / LFO; octave switch and fine-tuning control; individual outputs for sine, triangle, sawtooth and square/pulse waveforms; hard- and soft-sync selection switch; 2 FM inputs (AC and DC coupled); Link inputs for pitch and pulsewidth (for coupling with 921A module); power consumption: 45mA (+12V) / 45mA (-12V); width: 8 HP; depth: 40mm |
|
| Behringer : 112 Dual VCO
Behringer 112 Dual VCO; Eurorack module; two identical analog VCOs in one module; selectab...(+) Behringer 112 Dual VCO; Eurorack module; two identical analog VCOs in one module; selectable waveforms: triangle, sawtooth and squarewave/pulse; adjustable pulsewidth and PWM CV input with attenuator; octave-switch and fine-tune control knob; hard and soft sync; 3 pitch CV inputs with attenuators; power consumption: 130mA (+12V) / 70mA (-12V); width: 16 HP; depth: 46mm |
|
| Behringer : 921 VC Oscillator
Behringer 921 VC Oscillator; Eurorack module; analog oscillator with 6 waveforms (sine, tr...(+) Behringer 921 VC Oscillator; Eurorack module; analog oscillator with 6 waveforms (sine, triangle, ramp, sawtooth, square and pulse); tuning range: 6 octaves; fine-tune control; switchable LFO mode; PWM with 2 CV inputs; Hard-Sync with adjustable phase and 2 trigger inputs; 3 pitch-CV inputs (1V/oct.); Aux output with independently selectable waveform; power consumption: 50mA (+12V) / 50mA (-12V); width: 14 HP; depth: 45mm |
|
| Doepfer : A-110-2
(17 comments)
Basic VCO for the A-100 modular system- Voltage controlled oscillator - 3-Position toggle ...(+) Basic VCO for the A-100 modular system- Voltage controlled oscillator - 3-Position toggle switch - Linear FM input and soft-sync input - Tune control range can be set between approx. 1/2 octave and 4 octaves via a jumper - Width: 8 HP / 40.3 mm - Depth: 50 mm (measured from the rear of the front panel) - Power requirements: 12V: 150 mA (warm up period about 30 seconds), 60 mA (continuous operation) -12V: 30mA |
|
| Erica Synths : Pico VCO2
Erica Synths Pico VCO2; Eurorack module; compact analog VCO; solid tracking over 8 octaves...(+) Erica Synths Pico VCO2; Eurorack module; compact analog VCO; solid tracking over 8 octaves; controls for Tune and pulsewidth; inputs for pitch CV (1V/Oct.) and PWM; outputs for pulse and triangle wave; power consumption: 21mA ( 12V) / 19mA (-12V); width: 3 HP; depth: 35 mm |
|
| Erica Synths : Pico VCO
(1 comments)
Oscillator module- Digital oscillator with 32 waveforms - VCO / LFO mode - Frequency respo...(+) Oscillator module- Digital oscillator with 32 waveforms - VCO / LFO mode - Frequency response in VCO mode: 30 - 5000 Hz - Frequency response in LFO mode: 0.1 - 20000 Hz - W-CV input to select the waveforms with control voltages - Wave morphing in LFO mode - Width: 3 TE / HP - Depth: 35 mm - Electricity requirement: 26mA ( 12V) / -4mA (-12V) |
|
| ADDAC : 105 4 Voice Cluster
ADDAC 105 4 Voice Cluster; Eurorack module; 4-channel squarewave oscillator with FM and mu...(+) ADDAC 105 4 Voice Cluster; Eurorack module; 4-channel squarewave oscillator with FM and multimode filter; per channel: trigger input, adjustable decay-envelope, adjustable pitch and switchable FM from the previous oscillator; multimode filter with manual controls for cutoff and resonance; cutoff CV input with attenuverter; outputs for lowpass, bandpass and highpass; power consumption: 40mA (+12V) / 40mA (-12V); width: 8 HP; depth: 45mm |
|
| Doepfer : A-110-2 Vintage Edition
(4 comments)
Basic VCO for the A-100 modular system- Vintage Edition with black front panel - Voltage c...(+) Basic VCO for the A-100 modular system- Vintage Edition with black front panel - Voltage controlled oscillator - 3-Position toggle switch - Linear FM input and soft-sync input - Tune control range can be set between approx. 1/2 octave and 4 octaves via a jumper - Width: 8 HP / 40.3 mm - Depth: 50 mm (measured from the rear of the front panel) - Power requirements: 12V: 150 mA (warm up period about 30 seconds), 60 mA (continuous operation) -12V: 30mA |
|
| Doepfer : A-110-4 Thru Zero Quad VCO
(5 comments)
Zero Quadrature VCO- 2 Control sections: Linear and exponential - Controller for XTune, XF...(+) Zero Quadrature VCO- 2 Control sections: Linear and exponential - Controller for XTune, XFM, LFrq and LFM - Width: 8HP / 40.3 mm - Depth: 60 mm - Power requirements: 90 mA |
|
| Doepfer : A-110-4 Thru Zero Quad VCO SE
(12 comments)
Doepfer A-110-4- Special Edition with additional output amplifier - 2 Control sections: Li...(+) Doepfer A-110-4- Special Edition with additional output amplifier - 2 Control sections: Linear and exponential - Controller for XTune, XFM, LFrq and LFM - Width: 8HP / 40.3 mm - Depth: 60 mm - Power requirements: 90mA - Colour: Blue anodised front plate and white knobs |
|
| Doepfer : A-110-1
Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillat...(+) Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a range of about 8 octaves, of which four waveforms are available simultaneously: pulse, sawtooth, triangle and sine wave.- Width: 10 HP/ 50.5 mm - Depth: 55 mm (measured from the rear of the front panel) - Power requirements: 90 mA ( 12V)/ -20 mA (-12V) |
|
| Doepfer : A-112 Vintage Edition
(5 comments)
Sampler / Wavetable Module- Combined module of voltage controlled 8-bit sampler and waveta...(+) Sampler / Wavetable Module- Combined module of voltage controlled 8-bit sampler and wavetable oscillator - Black face plate - Width: 10 TE / 50.5 mm - Depth: 100 mm (measured from the rear of the front panel) - Power requirements: 50 mA (12V) / -20 mA (-12V) |
|
| IO Instruments : Themisto
IO Instruments Themisto; Eurorack module; analog VCO; outputs for sine, tiangle, ramp, saw...(+) IO Instruments Themisto; Eurorack module; analog VCO; outputs for sine, tiangle, ramp, sawtooth, square (with adjustable pulsewidth); square-suboscillator with switchable phase inversion; frequency range: 10Hz - 130kHz; switchable LFO mode (0,5Hz - 6kHz); CV inputs for linear and exponential FM, each with attenuators; CV input for pulsewidth-modulation; VCO sync input; buffered Thru-outputs for V/Oct and Sync-Gate; power consumption: 60mA (+12V) / 60mA (-12V); width: 12 HP |
|
| Doepfer : A-112
(9 comments)
Sampler / Wavetable moduleThe A-112 Module is a combined module of a voltage-controlled 8-...(+) Sampler / Wavetable moduleThe A-112 Module is a combined module of a voltage-controlled 8-bit sampler and a wavetable oscillator. Moreover, it is able to produce effects. It is available as a supplemental sound generator module for the A-100 with the characteristic sound characteristics of the early 8.Bit samplers and cannot be compared with commercially available MIDI samplers!- Combined module of voltage-controlled 8-bit sampler and wavetable oscillator - Width: 10 HP / 50.5 mm - Depth: 100 mm (measured from the back of the front panel) - Power Requirements: 50mA (12V) / -20mA (-12V) |
|
| Doepfer : A-110-1 Vintage Edition
(3 comments)
VCO- Standard VCO for the A-100 modular system - Black front panel - Width: 10 HP / 50.5 m...(+) VCO- Standard VCO for the A-100 modular system - Black front panel - Width: 10 HP / 50.5 mm - Depth: 55 mm (measured from the rear of the front panel) - Power requirements: 90 mA ( 12V) / -20 mA (-12V) |
|
| Doepfer : A-111-3
(4 comments)
Micro Precision VCO / VCLFO- Switchable between LFO and VCO modes - The range of the Tune ...(+) Micro Precision VCO / VCLFO- Switchable between LFO and VCO modes - The range of the Tune control can be changed by jumper - position 1: 16 Hz to 20 kHz, position 2: 16 Hz to 70 Hz, without jumper: 16 Hz to 22 Hz - Width: 4 HP - Depth: 65 mm - Power requirements: 40 mA ( 12 V) / -40 mA (-12 V) |
|
| NANO Modules : ONA
NANO Modules ONA; Eurorack module; CEM3340-based analog VCO/LFO; octave switch (range: 8 o...(+) NANO Modules ONA; Eurorack module; CEM3340-based analog VCO/LFO; octave switch (range: 8 octaves) and Fine-Tune control; selectable VCO- or LFO-Mode; switchable linear or exponential FM input; CV inputs for FM and Pulswidth, both with Attenuators; hard-sync input; waveform outputs: sine, triangle, sawtooth, pulse, two complex waveform outputs and two squarewave suboctaves (-1 octave and -2 octaves); power consumption: 50mA (+12V) / 30mA (-12V); width: 8 HP; depth: 30mm |
|
| EMW : VCO 204
100% Analogue VCO- Completely handmade - Inputs for linear and logarithmic frequency modul...(+) 100% Analogue VCO- Completely handmade - Inputs for linear and logarithmic frequency modulation - Waveforms: Square, Saw, Triangle and Sine - Stable tracking over 5 octaves - Pulse Width Modulation - Hard sync - Power consumption: 12V (50mA) / -12V (27mA) - CV Input - 3.5 mm Jack connectors - Depth: 50 mm - Weight: 179 g - 3 U Eurorack module - Width: 14 HP - Made in Brazil |
|
| Waldorf : nw1
(4 comments)
Eurorack module- Novel wavetable engine - Cyclic wavetable scanning with modular position ...(+) Eurorack module- Novel wavetable engine - Cyclic wavetable scanning with modular position and speed - Control of the spectral envelope without affecting pitch - Adjustable periodicity up to noise levels - Includes all classic Waldorf Wavetables - Voice synthesizer for Wavetables - Recording function for in-built Wavetables - Gate input for triggering the Wavetable passage and for recording - Main 1V / Oct CV input with pitch control - 3 Additional CV inputs for modulation and real-time recording for wavetables - Audio output - USB connection with galvanic isolation for Wavetable transfer and text input - Eurorack power connection - Power supply / - 12 V, 150 mA - Powder-coated metal surface - 10 Rotary knobs - 1 Wavetable select / encoder - 2 x 7 digit display - 6 Switches with 3 positions - Width: 32 HP (162.6 mm) |
|
(Change geographical area)
SYNTHESIZER KEYBOARD
