| Marshall : Studio Vintage SV20H (111 comments)
- Preamp based on the classic 1959 SLP- 1 Channel with 4 separate inputs- Power: 20 W with...(+) - Preamp based on the classic 1959 SLP- 1 Channel with 4 separate inputs- Power: 20 W with power reduction to 5 W- Tubes: 2x ECC83, 1x ECC83 (Phase Splitter), 2x EL34- DI out- Serial FX loop- Dimensions: 500 x 240 x 230 mm- Weight: 9.25 kg |
|
| Marshall : DSL20HR (161 comments)
- Reissue series - authentic DSL sound- Power: 20W- 2 Footswitchable channels with classic...(+) - Reissue series - authentic DSL sound- Power: 20W- 2 Footswitchable channels with classic gain and ultra gain- Preamp tubes: 3x ECC83- Power tubes: 2x EL34- Tone Shift key for centre configuration- Bass switch that complements a resonant bass boost- Independent volume and gain controls for both channels- Common sound control for treble, mid and bass- Emulated line output- Serial FX loop- Including footswitch |
|
| Marshall : JVM410H (176 comments)- |
|
| Hughes&Kettner : GrandMeister Deluxe 40 (101 comments)
- Power: 40W- 4 Channels: Clean, Crunch, Lead, Ultra- Smart rotary control: Storage capaci...(+) - Power: 40W- 4 Channels: Clean, Crunch, Lead, Ultra- Smart rotary control: Storage capacity of all controller settings- Power Soak: Switchable to 20 W / 5 W / 1 W / 0 W- Preamp tubes: 3x 12AX7- Power amp tubes: 4x EL84- Tube Safety Control (TSC): Monitors the tubes and ensures tonal stability and longer service life of the tubes- 128 Programmable presets- Inspired by Triamp 3 Deluxe tone technology- Integrated Red Box AE Di-Box with authentic speaker simulation- On-board studio-quality effects: Reverb, Tap delay, Flanger, Phaser, Chorus, Tremolo- MIDI In / Out - all sounds of the stored controller values â â can be retrieved via MIDI- Passive 3-Band EQ, Presence & Resonance- Switchable / adjustable Noise Gate- Weight: 7.7 kg- Dimensions (W x H x D): 445 x 170 x 150 mm- Includes soft-bag- Free app for Ipad GM40REMOTE- Matching MIDI board FSM-432 MK III: Article Nr 555003 (not included) |
|
| Marshall : Studio Classic SC20H (55 comments)
- Preamp based on the classic JCM 800 2203- 20 Watts with power reduction to 5 watts- Tube...(+) - Preamp based on the classic JCM 800 2203- 20 Watts with power reduction to 5 watts- Tubes: 2x ECC83, 1x ECC83 (Phase Splitter), 2x EL34- Controls: Preamp and Master Volume, Treble, Mid, Bass and Presence- 1 Channel with high and low sensitivity inputs- DI out- Serial FX loop- Dimensions: 510 x 240 x 240 mm- Weight: 9.7 kg- Suitable case: Art.501854 (not included in delivery) |
|
| Engl : E606 Ironball Head 20 SE (15 comments)
- Channels: 2- Power: 20 watts- Preamp tubes: 4x ECC 83/12 AX7- Power tubes: 2x EL 84- Con...(+) - Channels: 2- Power: 20 watts- Preamp tubes: 4x ECC 83/12 AX7- Power tubes: 2x EL 84- Controls: Clean Gain, Lead Gain, Bass, Middle, Treble, Lead Presence, Lead Volume, Master, Reverb Level, Delay Level, Noise Gate Treshold, Headphones Level- Switches: Store, M.V.B., Reverb, Delay, Gain Boos, Clean Lead, FX-Loop, Noise Gate, Stand By, Power, Phantom Power, IR Selector, Ground Lift, Power Soak (20W, 5W, 1W, Speaker Off)- Effects: Reverb, Delay, Noise Gate- Speaker outputs 8-16 ohms: 2x jack- Effect loop-in: tube-driven FX Loop- Input: 6.3 mm jack- FX Send & Return: 2x 6.3 mm jack- DI output: XLR- Headphone output: 3.5 mm stereo jack- Midi entrance- USB for Impulse Response loading- Dimensions (W x D x H): 33.5 x 21.7 x 14.2 cm- Weight: 8 kg- Made in Germany |
|
| Marshall : 1959 HW (17 comments)- |
|
| Hughes&Kettner : TubeMeister Deluxe 20 (55 comments)
- All tube- Power: 20 watts- 2 Channels: Clean and Lead with Lead / Boost function- Power ...(+) - All tube- Power: 20 watts- 2 Channels: Clean and Lead with Lead / Boost function- Power Soak: 20/5/1/0 watts- Preamp tubes: 2x 12AX7- Power tubes: 2x EL84- Classic 3-band EQ- Red Box AE Ambience Emulation DI output with the settings Vint. / Mod. & Small / Large to connect the amp directly to the PA or recording setup- Serial FX loop- 1 Speaker output: 8 - 16 Ohm- Dimensions: 35 x 15 x 15 cm- Weight: 5 kg- Incl. bag- Corresponding foot switch: Article Nr 548114 (not included) |
|
| Marshall : JVM410H Bundle 3 (34 comments)- |
|
| Orange : Pedal Baby 100 (25 comments)
- Class A / B solid-state amplifier- 1 Channel- Power: 100 watts- Speaker outputs: 2 x jac...(+) - Class A / B solid-state amplifier- 1 Channel- Power: 100 watts- Speaker outputs: 2 x jack, min. Total 8 ohms- Dimensions (W x H x D): 30 x 7.7 x 19.5 cm- Weight: 3.2 kg- Colour: Orange |
|
| Marshall : JTM45/2245 (33 comments)- |
|
| Engl : E633SR Fireball 25 LTD Red (11 comments)
- Limited Red Edition- 2 Channels- Power: 25 watts- Preamp tubes: 4x ECC83/12AX7- Power am...(+) - Limited Red Edition- 2 Channels- Power: 25 watts- Preamp tubes: 4x ECC83/12AX7- Power amp tubes: 2x 6L6GC- Controls: Clean Gain, Lead Gain, Bass, Middle, Treble, Lead Volume, Master Presence, Noise Gate(Treshold)- Switches: Mid Boost, Clean Lead, Stand By, Power, Power Soak (Full, 5 W, 1 W, Speaker Off).- Effects: Noise Gate- Speaker outputs: 2x jack (8-16 Ohm)- Effect loop-in paths- Input: 6.3 mm jack- FX send & return: 2x 6.3 mm jack- DI output: 6.3 mm jack- 2 Footswitch connections (Mid Boost, FX Loop On/Off, Clean/Lead, Master Volume Boost)- Dimensions (W x D x H): 420 x 230 x 200 mm- Weight: 11 kg- Made in Germany |
|
| Hughes&Kettner : TubeMeister Deluxe 40 (39 comments)
- All tube- Power: 40 W- 3 Channels: Clean, Crunch and Lead- Power Soak: 40/20/5/1/0 W- 3 ...(+) - All tube- Power: 40 W- 3 Channels: Clean, Crunch and Lead- Power Soak: 40/20/5/1/0 W- 3 x 12AX7 Preamp tubes- 4 x EL84 Power tubes- 2 Classic 3-band EQs- TSC Tube Safety Control for constant and automatic monitoring and control of the final power tube bias- Red Box AE Ambience Emulation DI output with the settings Vint. / Mod. and Small / Large to connect the amp directly to the PA or a recording setup- Integrated MIDI IN with phantom power- Serial FX loop- 1 Speaker output: 8 - 16 Ohm- Measurements: 44 x 17 x 15 cm- Weight: 8 kg- Incl. bag- Corresponding foot switches: Article Nr 135680#/548114# (not included) |
|
| Marshall : 2555X Silver Jubilee (38 comments)
- Power: 100 W- 2 Channels- Preamplifier tubes: 3x ECC83- Power amplifier tubes: 4x EL34- ...(+) - Power: 100 W- 2 Channels- Preamplifier tubes: 3x ECC83- Power amplifier tubes: 4x EL34- 1 Jack output- Input Gain (Push/Pull: Rhythm Clip)- Lead Master- Output Master- Treble- Middle- Bass- Presence- Pentode/Triode switching- FX Loop- DI Out- Dimensions (W x H x D): 750 x 230 x 310 mm- Weight: 22.1 kg- Foot switch (channel selection) included- Matching cover: Art.150488 (not included in delivery) |
|
| Engl : E633 Fireball 25 (20 comments)
- Channels: 2- Power: 25 watts- Preamp tubes: 4x ECC83 / 12AX7- Power tubes: 2x 6L6GC- Con...(+) - Channels: 2- Power: 25 watts- Preamp tubes: 4x ECC83 / 12AX7- Power tubes: 2x 6L6GC- Controls: Clean Gain, Lead Gain, Bass, Middle, Treble, Lead Volume, Master Presence, Noise Gate (Threshold)- Switches: Mid Boost, Clean Lead, Stand By, Power, Power Soak (Full, 5 W, 1 W, Speaker Off)- Effects: Noise Gate- Speaker outputs 8-16 ohms: 2x jack- Effect grinding paths- Input: 6.3 mm jack- FX Send & Return: 2x 6.3 mm jack- DI output: 6.3 mm jack- 2 Footswitch connections: (Mid Boost, FX Loop On / Off, Clean / Lead, Master Volume Boost)- Dimensions (W x D x H): 420 x 230 x 200 mm- Weight: 11 kg- Made in Germany |
|
| Marshall : 1987X (15 comments)- |
|
| Marshall : DSL100HR (47 comments)
- DSL Series- Power rating: 100 W- Tube equipment: 4 x ECC83 and 4 x EL34- 2 Channels: Cla...(+) - DSL Series- Power rating: 100 W- Tube equipment: 4 x ECC83 and 4 x EL34- 2 Channels: Classic Gain and Ultra Gain- Independent volume and gain control for both channels- Clean and Crunch Modes in Classic Gain Channel- Lead1 and Lead2 modes in Ultra Gain channel- Classic tone control with bass, middle and treble- Presence control- Tone Shift circuit- Variable resonance control- Adjustable deep switch- Pentode/Triode switching- Digital reverb independent for each channel- Speaker Outputs: 5 x 6.3 mm Jack output jacks (16 Ohm / 8 Ohm /- 4 Ohm load capacity)- Dimensions (W x H x D): 740 x 274 x 242 mm- Weight: 24.2 kg- Includes power cable and foot switch PEDL-90012- Compatible with PEDL-91016 with the modes: 1 - Clean (Classic Green) 2 - Crunch (Classic Red) 3 - OD1 (Ultra Green) 4 - OD2 (Ultra Red) 5 - Master 1/Master 2 (Toggle) 6 - FX Loop on/off |
|
| Soldano : SLO 30 Classic Head (5 comments)
- Smaller version of the legendary Soldano SLO 100 high gain amplifier with a smaller hous...(+) - Smaller version of the legendary Soldano SLO 100 high gain amplifier with a smaller housing and 30-watt power amplifier- Ultra-transparent post master FX loop with return level- Channel switch on the front- Wth Soldano Depth Mod- Channels: 2- Power: 30 watts- Preamp tubes: 5 x 12AX7- Power tubes: 2x 6L6- Controls: Ch 1 Gain, Ch 1 Master, Ch 2 Gain, Ch 2 Master, Bass, Middle, Treble, Depth, Presence- Switches: Channel Switch, Bright Switch, Mode Switch (Clean / Crunch), Fx Loop On / Off- Speaker outputs: 2x jack (4/8/16 ohm switchable)- Transparent serial effects loop- Made in the USA- Includes footswitch |
|
| Engl : Savage 120 E-610/2 MkII (4 comments)
- 4 Channels: Clean, Crunch I, Crunch II, Lead- Power: 120 W- Full tube design - no semico...(+) - 4 Channels: Clean, Crunch I, Crunch II, Lead- Power: 120 W- Full tube design - no semiconductors in the signal path- Preamplifier tubes: 6x Engl ECC83 / 12AX7- Power amp tubes: 2x Engl 6550- 2 Tube-driven FX loops with separate balance controls- Noise Gate with adjustable threshold (footswitchable)- Engl Power Tube Monitor- MIDI-In / MIDI thru- Engl MIDI foot controller phantom power switch- MIDI Channel Assignment and Controller Enable Switch- Write / Copy (for MIDI programming)- All switching functions MIDI programmable (excluding Power and Stand By)- S.A.C.: Serial Amp Control port- Sound Switching options: Input Lo / Hi, Bright, Preshape, Contour (Clean, Crunch I), Mid Le./Bo., Depth Boost, Gain Lo / Hi, Contour (Crunch II, Lead), Rough / Smooth- Controls: Gain (separate for each channel), Bass, Mid Lean, Mid Bold, Treble (Clean, Crunch I), Bass, Middle, Treble, Tone Balance (Crunch II, Lead), Volume (separate for each channel), Presence A, Presence B, Master A, Master B- Controls (rear side): Noise Gate Threshold Level, FX Loop I Balance, FX Loop II Balance- Outputs: 1 x 4 Ohm, 2 x 8 Ohm, 2 x 16 Ohm, 1 x 16 Ohm- Line out- Dimensions (W x H x D): 71 x 27 x 29 cm- Weight: 22 kg- Made in Germany |
|
| Engl : Powerball II E645/2 (66 comments)- |
|