Woodbrass
Brand:
American DJ (ADJ)
Description from Woodbrass :
The ADJ VPar Pak is a compact, low profile LED Par kit with two VPAR LED Pars, a soft case gig bag and an IR wireless remote. The LED Pars feature five 4-Watt, 4-IN1 LED (red, green, blue and amber), a scissor yoke, rubber feet for uplighting and a 4-button DMX display. The VPar is designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique sit-flat design so that it may sit directly on the ground or inside truss without the scissor yoke because the power and DMX ins and outs are mounted on the side of the fixture, not on the rear. The VPars offer smooth RGBA Color Mixing, have 40-degree beam angles, 15 built-in color macros, 5 operational modes (including DMX, Sound Active and Master/Slave), and has 8 DMX Channel modes for a variety of programming options. Users can also use the included ADJ LED RC2 IR wireless remote to change colors and functions of the LED Pars. Pack Includes: * 2x VPAR LED Pars * 1x Soft Case Gig Bag * 1x ADJ LED RC2 IR Wireless Remote Specifications : - Ultra bright slim flat black Par with 5x 4-Watt, 4-IN-1 QUAD LEDs (RGBA) casts no RGB shadows - Smooth RGBA Color Mixing (fast or slow color change operation) - Unique sit-flat design: Power and DMX Ins/Outs intelligently designed so the unit can be set flat on the ground or set inside truss - Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers - 8 DMX Channel modes: 1, 2, 3, 4, 5, 6, 7 or 8 channels - 5 Operational modes: RGBA Dimmer mode, sound active mode, static color mode, auto run mode (3 auto run modes), and DMX Control - Digital DMX Display with 4-button menu for easy navigation - Stand Alone or Master/Slave Configuration - Beam Angle: 40 degrees - 15 built-in Color Macros - DMX-512 protocol - Color strobe effect - Linkable via 3-pin XLR cable - Electronic Dimming: 0-100% - Flicker Free - Includes a scissor yoke to hang on truss, mount on a wall or set on the ground - Long Life LEDs (50,000 hrs.) - Power Draw: 21W Max - IEC AC input and out put on the side of the fixture to daisy chain the power cords (link up to 30 fixtures) - Compatible with ADJ LED RC2 wireless infrared remote control up to 30 ft./ 10M (included in the pak) - Multi-voltage operation: AC 100V-240V 50/60Hz - Dimensions (LxWxH): 225 x 220 x 85mm - Weight: 1.2 kg. - VPAR Gig Bag inner dimensions (LxWxH): 225 x 200 x 240mm - System Weight: 3 kg. Specifications subject to change without notice.
The ADJ VPar Pak is a compact, low profile LED Par kit with two VPAR LED Pars, a soft case gig bag and an IR wireless remote. The LED Pars feature five 4-Watt, 4-IN1 LED (red, green, blue and amber), a scissor yoke, rubber feet for uplighting and a 4-button DMX display. The VPar is designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique sit-flat design so that it may sit directly on the ground or inside truss without the scissor yoke because the power and DMX ins and outs are mounted on the side of the fixture, not on the rear. The VPars offer smooth RGBA Color Mixing, have 40-degree beam angles, 15 built-in color macros, 5 operational modes (including DMX, Sound Active and Master/Slave), and has 8 DMX Channel modes for a variety of programming options. Users can also use the included ADJ LED RC2 IR wireless remote to change colors and functions of the LED Pars. Pack Includes: * 2x VPAR LED Pars * 1x Soft Case Gig Bag * 1x ADJ LED RC2 IR Wireless Remote Specifications : - Ultra bright slim flat black Par with 5x 4-Watt, 4-IN-1 QUAD LEDs (RGBA) casts no RGB shadows - Smooth RGBA Color Mixing (fast or slow color change operation) - Unique sit-flat design: Power and DMX Ins/Outs intelligently designed so the unit can be set flat on the ground or set inside truss - Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers - 8 DMX Channel modes: 1, 2, 3, 4, 5, 6, 7 or 8 channels - 5 Operational modes: RGBA Dimmer mode, sound active mode, static color mode, auto run mode (3 auto run modes), and DMX Control - Digital DMX Display with 4-button menu for easy navigation - Stand Alone or Master/Slave Configuration - Beam Angle: 40 degrees - 15 built-in Color Macros - DMX-512 protocol - Color strobe effect - Linkable via 3-pin XLR cable - Electronic Dimming: 0-100% - Flicker Free - Includes a scissor yoke to hang on truss, mount on a wall or set on the ground - Long Life LEDs (50,000 hrs.) - Power Draw: 21W Max - IEC AC input and out put on the side of the fixture to daisy chain the power cords (link up to 30 fixtures) - Compatible with ADJ LED RC2 wireless infrared remote control up to 30 ft./ 10M (included in the pak) - Multi-voltage operation: AC 100V-240V 50/60Hz - Dimensions (LxWxH): 225 x 220 x 85mm - Weight: 1.2 kg. - VPAR Gig Bag inner dimensions (LxWxH): 225 x 200 x 240mm - System Weight: 3 kg. Specifications subject to change without notice.
Kit incluant :
* 2x PARs à LEDs VPAR
* 1x Sac de transport
* 1x télécommande infrarouge ADJ LED RC2
Spécifications :
- PAR à LED compact et très puissant comprenant 5 Quad-LEDs 4-en-1 RGBA de 4W chacune
- Ne projette pas d•ombres RGBA
- Mélange des couleurs fluide (changement de couleur de lent à rapide)
- Idéal comme éclairage scénique ou wash mural
- 8 modes DMX: 1, 2, 3, 4, 5, 6, 7 ou 8 canaux DMX
- 5 modes opérationnels: Gradation RGBA, mode musical, mode couleur Statique, mode automatique (3 modes) et mode DMX
- Affichage digital à 4 boutons de navigation
- Fonctionne en autonome ou en configuration maître/esclave
- Angle d•ouverture de faisceau : 40 degrés
- 15 macros couleur intégrées
- Protocole DMX-512
- Effet stroboscope couleur
- Chaînage par câble DMX 3 pôles
- Gradation électronique: 0-100%
- Sans scintillement
- Double lyre d•accroche pour montage en structure ou pose au sol
- LEDs à longue durée de vie estimée à 50.000 heures
- Consommation électrique: 21W max.
- Entrées et sorties CEI et DMX latérales pour chaînage de l•alimentation électrique (jusqu•à 30 PARs) et du signal DMX
- Compatible avec la télécommande LED RC2 d•ADJ d•une portée de 10m (incluse dans le kit)
- Alimentation multi-voltage: CA 100V-240V 50/60Hz
- Dimensions (LxlxH): 225 x 220 x 85mm / 9• x 8.75• x 3.5•
- Poids: 1,2kg / 3 lbs.
- Dimensions intérieures du sac de transport (LxlxH): 225 x 200 x 240mm
- Poids du kit complet: 3 kg.
Spécifications sujettes à modification sans préavis
* 2x PARs à LEDs VPAR
* 1x Sac de transport
* 1x télécommande infrarouge ADJ LED RC2
Spécifications :
- PAR à LED compact et très puissant comprenant 5 Quad-LEDs 4-en-1 RGBA de 4W chacune
- Ne projette pas d•ombres RGBA
- Mélange des couleurs fluide (changement de couleur de lent à rapide)
- Idéal comme éclairage scénique ou wash mural
- 8 modes DMX: 1, 2, 3, 4, 5, 6, 7 ou 8 canaux DMX
- 5 modes opérationnels: Gradation RGBA, mode musical, mode couleur Statique, mode automatique (3 modes) et mode DMX
- Affichage digital à 4 boutons de navigation
- Fonctionne en autonome ou en configuration maître/esclave
- Angle d•ouverture de faisceau : 40 degrés
- 15 macros couleur intégrées
- Protocole DMX-512
- Effet stroboscope couleur
- Chaînage par câble DMX 3 pôles
- Gradation électronique: 0-100%
- Sans scintillement
- Double lyre d•accroche pour montage en structure ou pose au sol
- LEDs à longue durée de vie estimée à 50.000 heures
- Consommation électrique: 21W max.
- Entrées et sorties CEI et DMX latérales pour chaînage de l•alimentation électrique (jusqu•à 30 PARs) et du signal DMX
- Compatible avec la télécommande LED RC2 d•ADJ d•une portée de 10m (incluse dans le kit)
- Alimentation multi-voltage: CA 100V-240V 50/60Hz
- Dimensions (LxlxH): 225 x 220 x 85mm / 9• x 8.75• x 3.5•
- Poids: 1,2kg / 3 lbs.
- Dimensions intérieures du sac de transport (LxlxH): 225 x 200 x 240mm
- Poids du kit complet: 3 kg.
Spécifications sujettes à modification sans préavis
| Seller information : | Woodbrass |
| Place : | Nantes, France |
| Shipping : | Livraison Mondiale |
SIMILAR ITEMS
