Brand: BehringerDescription from Thomann : Behringer 130 Dual VCA Eurorack Module - Analogue 2-channel VCA - Per channel: Mixer with 3 adjustable inputs, 3 CV inputs with attenuator, gain control, 2 signal outputs (low/high) and switch between linear and exponential characteristics - Current consumption: 30mA (+12V) / 20mA (-12V) - Width: 16 HP Behringer 112 Dual VCO Eurorack Module - Contains two identical analogue VCOs - Waveforms: triangle, sawtooth and square/pulse - Adjustable pulse width and PWM CV input with attenuator - Octave selector and fine-tune control - Hard- and soft-sync - 3 Pitch CV inputs with attenuators - Current consumption: 130 mA (+12 V) / 70 mA (-12 V) - Width: 16 HP - Depth: 46 mm Behringer 140 Dual Envelope/LFO Eurorack Module - Two independent analogue ADSR envelopes - For each envelope: manual trigger button, gate input, fader for attack, decay, sustain and release - 2 Signal outputs and inverted output - Analogue LFO with 5 waveforms - Fader for frequency and delay time - Three frequency ranges selectable (0.05 - 30Hz) - CV and trigger input and 2 signal outputs - Current consumption: 40mA (+12V) / 40mA (-12V) - Width: 16 HP - Depth: 44 mm Behringer 121 Dual VCF Eurorack Module - Authentic reproduction of the original "System 100M" circuitry - 2 Low-pass filters with cut-off frequency and resonance control - Each filter has 3 audio outputs and 3 CV inputs with attenuators - Each VCF has an additional switchable 3-mode high-pass filter - 3-Channel mixer per VCF allows independent mixing of all input signals - Current requirement: 40 mA +12 V, 40 mA -12 V - Width: 16 HP Behringer 150 Ring Mod/Noise/S&H/LFO Eurorack Module - Analogue ring modulator - Noise generator with two outputs for white noise and pink noise - Sample & hold unit with clock out, external clock in and fader for clock rate and lag time - Analogue LFO with 5 waveforms - Fader for frequency and delay time - Three frequency ranges selectable (0.03 - 30Hz) - CV and trigger input and 2 signal outputs - Current consumption: 60mA (+12V) / 50mA (-12V) - Width: 16 HP - Depth: 44 mm Behringer Eurorack 104 Eurorack empty housing - Compact empty housing for synthesizer modules and accessories in a 3 U format - Sturdy aluminium frame with wooden side walls - Width: 104 HP - maximum depth: 38 mm (1.5") - Easy positioning of modules using 52 sliding nuts (included) - Large rubber feet are secure and non-sliping on most surfaces - Dimensions (W x H x D): 546 x 84 x 133 mm - Weight: 1.2 kg - Design and development in the UK Behringer CP1A Power supply module for Eurorack systems - Control LEDs for +12 V, -12 V and +5 V. - Slots for 2 Flying Bus Boards with 7 slots each - Output: 1 A (+12 V) / 1 A (-12 V) / 0.5 A (+5 V) - Width: 4 HP - Depth: 52mm - Includes external power supply unit (13 V DC, 3 A), 2 Flying Bus Boards with 7 slots each 2x the sssnake DD1030 Patch Cable Set - Mini jack mono to Mini jack mono - Length: 30 cm - Set of 6 cables
|
Modular Synthesizers pour SYNTHESIZER KEYBOARD |
© 2000 - 2024
Home - New realises - Composers
Legal notice - Full version