Brand: BehringerDescription from Thomann : Behringer Eurorack Go Eurorack Case - 2 Rows, each with 140 HP - Integrated bus board with 32 slots for Eurorack modules - Vertical mounting is made possible with the integrated stand - 96 Slide nuts (M3) pre-installed - Maximum module depth: 40 mm (lower row), 62 mm (upper row) - Power supply unit: +12 V / 3000 mA, -12 V / 1000 mA, +5 V / 1000 mA - Dimensions (H x W x D): 112 x 723 x 311 mm - Weight: 3.9 kg - Includes external power supply unit (13 VDC, 5 A) Behringer 921 VC Oscillator Eurorack Module - Analogue oscillator with 6 waveforms: Sine, triangle, rising and falling sawtooth, square and pulse. - Tuning range: 6 octaves - Fine-tune control - Switchable LFO mode - PWM with 2 CV inputs - Hard sync with adjustable phase and two trigger inputs - 3 CV inputs (1V/oct.) - Aux output with separately selectable waveform - Current consumption: 50 mA (+12 V) / 50 mA (-12 V) - Width: 14 HP - Depth: 45 mm Behringer 904A VC Low Pass Filter Eurorack Module - Analogue -24dB/oct - Low pass filter with resonance - 3 Frequency ranges switchable - 3 CV inputs for filter frequency - Current consumption: 65mA (+12V) / 50mA (-12V) - Width: 8 HP - Depth: 38 mm 4x Behringer 921B Oscillator Eurorack Module - Analogue VCO / LFO - Octave selector and fine-tune control - Outputs for sine, triangle, sawtooth and square/pulse - Hard- and soft-sync selector switch - 2 FM inputs (AC and DC coupled) - Link inputs for pitch and pulse width (for control by 921A module) - Current consumption: 45 mA (+12 V) / 45 mA (-12 V) - Width: 8 HP - Depth: 40 mm Behringer 914 Fixed Filter Bank Eurorack Module - 12 Active bandpass filters in the range of 125 Hz-5.6 kHz - Additional low-pass and high-pass filters - 2 Parallel inputs and outputs - Current consumption: 60mA (+12V) / 70mA (-12V) - Width: 28 HP - Depth: 42 mm Behringer 904B VC High Pass Filter Eurorack Module - Analogue -24 dB/oct. high-pass filter - 2 Frequency ranges switchable - 3 CV inputs for filter frequency - Current consumption: 55 mA (+12V) / 55 mA (-12V) - Width: 8 HP - Depth: 43 mm 3x Behringer 911 Envelope Generator Eurorack Module - Analogue envelope generator - Controls for attack, decay, release time and sustain level - Segment times adjustable from 2 ms - 10 s - S-trigger input - Width: 8 HP Behringer 923 Filters Eurorack Module - Analogue dual filter and noise generator - Separate low-pass and high-pass filter - Per filter cutoff control - Audio input and audio output - 2 Outputs for white noise - 2 Outputs for pink noise - Current consumption: 35mA (+12 V) / 45mA (-12 V) - Width: 8 HP - Depth: 35 mm Behringer 961 Interface Eurorack Module - Multi-channel trigger converter - 2 Channels for converting S-trigger to 2x V-trigger - Derivation of 2 V-trigger signals from one audio signal (with adjustable sensitivity) - Two channels with multi-channel V-trigger (2x 6 inputs) conversion to S-trigger output - S-trigger length adjustable for V-trigger input group B - Width: 21 HP Behringer CP35 Attenuators Eurorack Module - 4 Passive attenuators with normalised inputs - 4 Outputs for a fixed reference voltage (2x +6 V and 2x -6 V) - 2 Passive 4-jack multiples - Current draw: 1 mA (+12 V) / 1 mA (-12 V) - Width: 21 HP - Depth: 35 mm 2x Behringer 921A Oscillator Driver Eurorack Module - Authentic reproduction of the circuits from the series "Modular 55 & 35" - Controls up to 12 parallel 921B oscillator modules - 2 Summed CV inputs for frequency control and 2 summed CV inputs for pulse width modulation - Switchable semitone / octave selector and manual pulse width control - Power requirement: 15 mA +12 V, 15 mA -12 V - Width: 8 HP 3x Behringer 902 VCA Eurorack Module - Switchable between linear and exponential characteristic curve - Knob for manual adjustment - 2 Signal inputs and outputs (1x inverted) - 3 CV inputs - Suitable for audio and CV signals - Width: 8 HP 2x Behringer CP3A-M Mixer Eurorack Module - 4 Inputs with volume control - Master gain control - 4 Parallel master outputs (2x inverted) - 2 Integrated passive 4-jack multiples - Width: 14 HP Behringer 962 Sequential Switch Eurorack Module - Analogue CV multiplexer / switch - 3 Trigger inputs and outputs - 3 Buttons for manual channel selection - CV Input for switching channels - 2 Parallel V trigger outputs - Width: 8 HP Behringer 995 Attenuators Eurorack Module - 3 Separate attenuators - Each with input and output - Suitable for CV and audio signals - Width: 8 HP Behringer 903A Random Signal Generator Eurorack Module - Analogue noise generator with two outputs for white and pink noise - Current consumption: 25mA (+12V) / 35mA (-12V) - Width: 4 HP - Depth: 23 mm Behringer 992 Control Voltages Eurorack Module - Auxiliary module that mixes 4 CV inputs to 3 parallel outputs - Inputs 1-3 with unity gain - Input 4 with bi-polar attenuator - Each input can be activated via switch - Current consumption: 10 mA (+12V) / 10 mA (-12V) - Width: 8 HP - Depth: 35 mm Behringer CP3A-O OSC Controller Eurorack Module - 4 CV inputs - CV input 4 with attenuator - 4 Switches to switch and sum CV signals - 3 CV outputs with identical signal - Width: 8 HP - Current consumption: 5 mA (+12 V) / 5 mA (-12 V) Behringer 911A Dual Trigger Delay Eurorack module - Analogue dual trigger delay with 2ms to 10s delay time - Authentic reproduction of the circuits from the "Modular 55" series - Channels can be used independently, in series or in parallel - 2 separate channels with dedicated S-trigger inputs and outputs - Power supply: 6 mA +12 V, 6 mA -12 V - Width: 8 TE the sssnake DD1060 Patch Cable Set - Mini jack mono to Mini jack mono - Length: 60 cm - Set of 6 cables 2x the sssnake DD1030 Patch Cable Set - Mini jack mono to Mini jack mono - Length: 30 cm - Set of 6 cables the sssnake DD1015 Patch Cable Set - 2x Mini jack mono - Length: 15cm - Set of 6 cables
|
All items : Modular Synthesizers pour SYNTHESIZER KEYBOARD |
© 2000 - 2024
Home - New realises - Composers
Legal notice - Full version