Woodbrass
Brand:
DPA
Description from Woodbrass :
A complete stereo pair; two handpicked cardioid condenser microphones, selected on sensitivity within ±1.5 dB. Makes several stereo principles like XY and ORTF easy to obtain. The compact design and controlled directionality of these mics make them an excellent choice for spot mics for classical recording and on-stage close mics for live sound. The foam design in the heavy-duty transportation box allows for fast and easy exchange of the microphone/accessory inlays. These condenser microphones are acclaimed for its close-miking excellence and hi-SPL handling. Optimized for onstage use, it has been used on many stages as well as recording sessions. It exhibits a previously unheard blend of clarity, richness and dynamic range. The off-axis response is linear but in a smaller frequency bandwidth. This makes stage separation and gain-to-feedback higher. The mic level is easier to control. Features: - Sensitivity-selected pair - Blends clarity, richness and dynamics - Twin diaphragm capsule and interference tube technologies - Superb stage separation and level control - Low-profile mounting options - Modular flexibility - Peli Case transportation and protection - x2 Clips and x2 Foam windscreens included Specifications: - Directional characteristics: Cardioid - Principle of operation: Pressure gradient, with interference tube - Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule - Frequency range: 20 Hz - 20 kHz - Frequency range, ± 2 dB: 50 Hz - 17 kHz with 3 dB soft boost at 12 kHz - Sensitivity, nominal, ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa - Equivalent noise level, A-weighted: Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A)) - Equivalent noise level, A-weighted: Typ. 33 dB (max. 36 dB) - S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 74 dB(A) - Total Harmonic Distortion (THD): 50 dB - Power supply: 48 V Phantom power (± 4 V) - Current consumption: 2.8 mA - Connector : XLR-3M. Pin 1: shield, Pin 2: signal phase, Pin 3: - phase - Color: Matte black - Weight: 64 g (2.3 oz) - Microphone diameter: 19 mm (0.75 in) - Microphone length: 92 mm (3.6 in) - Output voltage, RMS: 4.5 V - Polarity: V at pin 2 for positive sound pressure - Temperature range: -40 to 45°C (-40 to 113°F) - Relative Humidity (RH): Up to 90% - Matching tolerance (frequency response and sensitivity): ±1.5 dB
A complete stereo pair; two handpicked cardioid condenser microphones, selected on sensitivity within ±1.5 dB. Makes several stereo principles like XY and ORTF easy to obtain. The compact design and controlled directionality of these mics make them an excellent choice for spot mics for classical recording and on-stage close mics for live sound. The foam design in the heavy-duty transportation box allows for fast and easy exchange of the microphone/accessory inlays. These condenser microphones are acclaimed for its close-miking excellence and hi-SPL handling. Optimized for onstage use, it has been used on many stages as well as recording sessions. It exhibits a previously unheard blend of clarity, richness and dynamic range. The off-axis response is linear but in a smaller frequency bandwidth. This makes stage separation and gain-to-feedback higher. The mic level is easier to control. Features: - Sensitivity-selected pair - Blends clarity, richness and dynamics - Twin diaphragm capsule and interference tube technologies - Superb stage separation and level control - Low-profile mounting options - Modular flexibility - Peli Case transportation and protection - x2 Clips and x2 Foam windscreens included Specifications: - Directional characteristics: Cardioid - Principle of operation: Pressure gradient, with interference tube - Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule - Frequency range: 20 Hz - 20 kHz - Frequency range, ± 2 dB: 50 Hz - 17 kHz with 3 dB soft boost at 12 kHz - Sensitivity, nominal, ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa - Equivalent noise level, A-weighted: Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A)) - Equivalent noise level, A-weighted: Typ. 33 dB (max. 36 dB) - S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 74 dB(A) - Total Harmonic Distortion (THD): 50 dB - Power supply: 48 V Phantom power (± 4 V) - Current consumption: 2.8 mA - Connector : XLR-3M. Pin 1: shield, Pin 2: signal phase, Pin 3: - phase - Color: Matte black - Weight: 64 g (2.3 oz) - Microphone diameter: 19 mm (0.75 in) - Microphone length: 92 mm (3.6 in) - Output voltage, RMS: 4.5 V - Polarity: V at pin 2 for positive sound pressure - Temperature range: -40 to 45°C (-40 to 113°F) - Relative Humidity (RH): Up to 90% - Matching tolerance (frequency response and sensitivity): ±1.5 dB
Contenu de la mallette :
- 2 x 2011C Microphone Cardioïde Double Membrane Compact
- 2 x DUA0028 Bonnette Mousse pour 2011C
- 2 x UA0639 Pince Microphone
- 2 x 2011C Microphone Cardioïde Double Membrane Compact
- 2 x DUA0028 Bonnette Mousse pour 2011C
- 2 x UA0639 Pince Microphone
| Seller information : | Woodbrass |
| Place : | Nantes, France |
| Shipping : | Livraison Mondiale |
SIMILAR ITEMS
