Woodbrass
.gif)
Brand:
Drawmer
Description from Woodbrass :
Building on the success of the MC2.1, the MC3.1 Monitor Controller is just as accurate and transparent and of the same build quality. It can still faithfully reproduce what has been recorded without colouring the sound, but comes with a much expanded feature set, including more inputs, better control, extended channel routing and a desk top 'wedge' form factor. Additions include a combined digital AES/SPDIF (24 bit/192kHz) input, giving a total of 5 individually switchable sources, including a front panel auxilary input with level control for the easy connection of your mp3 player, smartphone or tablet. Full cue mix facilities, with level control, provide separate source selection for main or cue outputs and the two headphone amplifiers, so the artist can listen to a completely different mix to the engineer, for example. A dedicated cue mix output is also available. A secondary preset volume control on the front provides repeatable calibrated output level for the monitors, so that at the flick of a switch the engineer can hear the mix at the same predetermined volume, time after time, without having to meticulously adjust controls. The MC3.1 incorporates three stereo balanced speaker outputs, plus a dedicated mono speaker/sub-woofer output each with individual left/right trims under the unit to provide complete control over level matching. Furthermore each can be switched individually and simultaneously and in any order. You can listen to multiple speakers with the same sub-woofer, or turn the sub-woofer off altogether. Other improvements include additional mix checking capabilities, which now incorporate low, mid, high solo switches to hear how the lows bleed into the mid, or the stereo width of each, for example, and also the ability to swap the left and right channels. The talkback has been expanded to include an external mic in addition to the internal, and footswitch operation. Can you trust the audio that your current monitor controller is providing Is it colouring the sound For all Drawmer monitor controllers it is imperative that what you record is exactly what you hear. The active circuit has been designed to faithfully produce the audio signal whilst removing many of the problems that a passive circuit will bring. There is one thing that should always be absolutely guaranteed - that you can rely on the accuracy of your monitor controller. Ultra low noise and transparent circuit design. Source switches for both Main and Cue can be active in any combination. 5 Inputs in Total - 1x Digital AES/SPDIF Neutrik XLR/JACK COMBI and 2 balanced analogue Neutrik XLR/JACK COMBI and 1 stereo RCA Analogue on the Rear Panel and 1 3.5mm Front Panel Aux. 3x Speakers Plus a Mono Sub can be switched individually and simultaneously or give A/B comparisons. Each has level trims to provide precise channel matching. Timed relay protection on all speaker outputs to prevent power up/down bangs. Volume can be set via the Variable Front Panel Knob or a Preset Control. Each has parallelled custom quad pots for excellent channel matching and smooth feel. 2x Headphone Amplifiers with Individual Level Controls and Switching between Main and Cue Inputs so the Artist can listen to a Different Mix to the Engineer. Front Panel 3.5mm AUX Input and Level Control for connecting MP3 player, smartphone or tablet etc. Cue Level Control adjusts the volume for the Artist's Monitors. Built In Talkback with Level Control, Internal or External Microphone, Switching via Desktop or Footswitch, a Mono Output Jack and Internal Routing to Headphone and Cue Outputs. Comprehensive Mix Checking facilities Including Low, Mid, High Solo; Dim; L/R Mute; Phase Reverse and more, help check every aspect of your Mix and Provide Ultimate Control. Desktop 'wedge' form factor. Kensington security slot (also called a K-Slot or Kensington lock). Rugged steel chasis and stylish brushed aluminium cover.
Building on the success of the MC2.1, the MC3.1 Monitor Controller is just as accurate and transparent and of the same build quality. It can still faithfully reproduce what has been recorded without colouring the sound, but comes with a much expanded feature set, including more inputs, better control, extended channel routing and a desk top 'wedge' form factor. Additions include a combined digital AES/SPDIF (24 bit/192kHz) input, giving a total of 5 individually switchable sources, including a front panel auxilary input with level control for the easy connection of your mp3 player, smartphone or tablet. Full cue mix facilities, with level control, provide separate source selection for main or cue outputs and the two headphone amplifiers, so the artist can listen to a completely different mix to the engineer, for example. A dedicated cue mix output is also available. A secondary preset volume control on the front provides repeatable calibrated output level for the monitors, so that at the flick of a switch the engineer can hear the mix at the same predetermined volume, time after time, without having to meticulously adjust controls. The MC3.1 incorporates three stereo balanced speaker outputs, plus a dedicated mono speaker/sub-woofer output each with individual left/right trims under the unit to provide complete control over level matching. Furthermore each can be switched individually and simultaneously and in any order. You can listen to multiple speakers with the same sub-woofer, or turn the sub-woofer off altogether. Other improvements include additional mix checking capabilities, which now incorporate low, mid, high solo switches to hear how the lows bleed into the mid, or the stereo width of each, for example, and also the ability to swap the left and right channels. The talkback has been expanded to include an external mic in addition to the internal, and footswitch operation. Can you trust the audio that your current monitor controller is providing Is it colouring the sound For all Drawmer monitor controllers it is imperative that what you record is exactly what you hear. The active circuit has been designed to faithfully produce the audio signal whilst removing many of the problems that a passive circuit will bring. There is one thing that should always be absolutely guaranteed - that you can rely on the accuracy of your monitor controller. Ultra low noise and transparent circuit design. Source switches for both Main and Cue can be active in any combination. 5 Inputs in Total - 1x Digital AES/SPDIF Neutrik XLR/JACK COMBI and 2 balanced analogue Neutrik XLR/JACK COMBI and 1 stereo RCA Analogue on the Rear Panel and 1 3.5mm Front Panel Aux. 3x Speakers Plus a Mono Sub can be switched individually and simultaneously or give A/B comparisons. Each has level trims to provide precise channel matching. Timed relay protection on all speaker outputs to prevent power up/down bangs. Volume can be set via the Variable Front Panel Knob or a Preset Control. Each has parallelled custom quad pots for excellent channel matching and smooth feel. 2x Headphone Amplifiers with Individual Level Controls and Switching between Main and Cue Inputs so the Artist can listen to a Different Mix to the Engineer. Front Panel 3.5mm AUX Input and Level Control for connecting MP3 player, smartphone or tablet etc. Cue Level Control adjusts the volume for the Artist's Monitors. Built In Talkback with Level Control, Internal or External Microphone, Switching via Desktop or Footswitch, a Mono Output Jack and Internal Routing to Headphone and Cue Outputs. Comprehensive Mix Checking facilities Including Low, Mid, High Solo; Dim; L/R Mute; Phase Reverse and more, help check every aspect of your Mix and Provide Ultimate Control. Desktop 'wedge' form factor. Kensington security slot (also called a K-Slot or Kensington lock). Rugged steel chasis and stylish brushed aluminium cover.
Toutes les sorties sont équipées de relais temporisés pour éviter les bruits à l•allumage/extinction.
Eventail complet de contrôle : Gauche/Droite Cut, inversion de phase, inversion du L<->R, Mono, Dim, Mute et mute L ou R, solo par bande de fréquences "Low"/"Mid"/"High".
5 entrées au total, une entrée numérique AES/SPDIF en combo XLR/Jack, 2 entrées stéréo symétriques sur connecteurs combos XLR/Jack et une entrée stéréo sur RCA à l'arrière doublée d'un Jack 3,5mm sur la machine avec réglage de gain. et sélection de bus "Main" ou "Cue".
Bus de monitoring "Cue" avec sélection de source et volume indépendant du bus "Main" et sorties indépendantes stéréo en Jack TRS.
2 sorties casques avec ampli et contrôle de volume individuels
Micro Talk Back intégré avec réglage de niveau, sortie sur Jack mono, entrée micro externe et entrée footswitch et routing vers casque.
Châssis robuste et élégant en acier.
| Seller information : | Woodbrass |
| Place : | Nantes, France |
| Shipping : | Livraison Mondiale |
SIMILAR ITEMS
