Woodbrass
Brand:
Eagletone
Description from Woodbrass :
Sense 100 fixation bar for 2 micros The new Eagletone Sense microphone range is especially designed for studio recording or for complex live and broadcasting situations. Sturdy, efficient and reliable, the Sense microphones capture and deliver all the subtleties in the sound, from acoustic guitars to the lowest pitched voices, but are also suited to electric guitars, bass guitars, pianos, percussions or wind instruments. The Eagletone SENSE 100 microphone follows the tradition of the classic studio microphones, with its condenser, 22mm cardioid capsule and FET preamplifier. The sound remains neutral and easily mixable, while background noise is kept at an extremely low level. Specifications: - Thin pencil-shaped cylindrical body - Cardioid directivity capsule - Frequency response: 20Hz-20kHz - -10dB pad switch - Sensitivity: -39dB ± 2dB (0dB = 1V/Pa @ 1kHz) - Impedance: <200 - Signal-to-noise ratio: <22dB (A-weighted) - Maximum sound pressure level: 134dB (0.5% THD @ 1kHz) - Male XLR connector - Carrying pouch, clamp and cover included Note: These microphones require a 48V phantom power supply
Sense 100 fixation bar for 2 micros The new Eagletone Sense microphone range is especially designed for studio recording or for complex live and broadcasting situations. Sturdy, efficient and reliable, the Sense microphones capture and deliver all the subtleties in the sound, from acoustic guitars to the lowest pitched voices, but are also suited to electric guitars, bass guitars, pianos, percussions or wind instruments. The Eagletone SENSE 100 microphone follows the tradition of the classic studio microphones, with its condenser, 22mm cardioid capsule and FET preamplifier. The sound remains neutral and easily mixable, while background noise is kept at an extremely low level. Specifications: - Thin pencil-shaped cylindrical body - Cardioid directivity capsule - Frequency response: 20Hz-20kHz - -10dB pad switch - Sensitivity: -39dB ± 2dB (0dB = 1V/Pa @ 1kHz) - Impedance: <200 - Signal-to-noise ratio: <22dB (A-weighted) - Maximum sound pressure level: 134dB (0.5% THD @ 1kHz) - Male XLR connector - Carrying pouch, clamp and cover included Note: These microphones require a 48V phantom power supply
Caractéristiques :
- Corps cylindrique fin type "crayon"
- Capsule à directivité cardioïde
- Réponse en fréquences : 20Hz-20kHz
- Interrupteur d'atténuation -10 dB (PAD)
- Sensibilité : -39dB /- 2dB (0dB = 1V/Pa @ 1000Hz)
- Impédance : <200 Ohm
- Niveau de bruit : <22dB (Pondéré A)
- Pression acoustique maximum : 134dB (0.5% de DHT à 1000Hz)
- Connecteur XLR mâle
- Livré avec housse de transport, pince et bonnette.
Attention : ces micros requièrent une Alimentation fantôme 48V.
Barre de couplage SB01 :
- Barre de couplage pour 2 micros
- Longueur 300 mm, largeur 25 mm, épaisseur 3.5 mm
- Espacement des micros : maxi 27 cm, mini 6.5 cm
- Fabrication en métal
- Finition noir satiné
- Corps cylindrique fin type "crayon"
- Capsule à directivité cardioïde
- Réponse en fréquences : 20Hz-20kHz
- Interrupteur d'atténuation -10 dB (PAD)
- Sensibilité : -39dB /- 2dB (0dB = 1V/Pa @ 1000Hz)
- Impédance : <200 Ohm
- Niveau de bruit : <22dB (Pondéré A)
- Pression acoustique maximum : 134dB (0.5% de DHT à 1000Hz)
- Connecteur XLR mâle
- Livré avec housse de transport, pince et bonnette.
Attention : ces micros requièrent une Alimentation fantôme 48V.
Barre de couplage SB01 :
- Barre de couplage pour 2 micros
- Longueur 300 mm, largeur 25 mm, épaisseur 3.5 mm
- Espacement des micros : maxi 27 cm, mini 6.5 cm
- Fabrication en métal
- Finition noir satiné
| Seller information : | Woodbrass |
| Place : | Nantes, France |
| Shipping : | Livraison Mondiale |
SIMILAR ITEMS
