Woodbrass
Microtech Gefell
Description from Woodbrass :
The M296 condenser microphone is an addition to the metal diaphragm microphone family which includes the M 294 / M 295. Based on the nearly linear frequency response of the transmission factor up to 20 kHz it guarantees orthophonic recordings in the near and far field as well as recordings of high sound levels. lt is designed for professional applications in radio and television broadcasting, sound studios, concert halls, theatres and for high-quality recordings of all genres. The direction of maximum sensitivity is axial. The stable capsule contains a large diameter metal diaphragm similar to our reliable measuring microphone cartridges regarding its construction as a pressure transducer. Capsule and impedance converter are a single unit. The transformerless microphone preamplifier shows a high output capability and has a symmetrical output stage. A 10 dB preattenuation pad and the bass roll-off extend the application range. The two switches are sunk into the middle of the preamplifier. The microphone is equipped with a standard 3-pin XLR connector fitting to a microphone cable, e.g. C70. The operation voltage is provided by 48 V phantom powering according to the international standards DIN 45596 and IEC 268-15. A special version -the M 296 S- is available for measurement applications. Its frequency response complies with DIN EN 60 651for Class 2 sound level meters. The microphone is available in a satin nickel or a black matt finish.
The M296 condenser microphone is an addition to the metal diaphragm microphone family which includes the M 294 / M 295. Based on the nearly linear frequency response of the transmission factor up to 20 kHz it guarantees orthophonic recordings in the near and far field as well as recordings of high sound levels. lt is designed for professional applications in radio and television broadcasting, sound studios, concert halls, theatres and for high-quality recordings of all genres. The direction of maximum sensitivity is axial. The stable capsule contains a large diameter metal diaphragm similar to our reliable measuring microphone cartridges regarding its construction as a pressure transducer. Capsule and impedance converter are a single unit. The transformerless microphone preamplifier shows a high output capability and has a symmetrical output stage. A 10 dB preattenuation pad and the bass roll-off extend the application range. The two switches are sunk into the middle of the preamplifier. The microphone is equipped with a standard 3-pin XLR connector fitting to a microphone cable, e.g. C70. The operation voltage is provided by 48 V phantom powering according to the international standards DIN 45596 and IEC 268-15. A special version -the M 296 S- is available for measurement applications. Its frequency response complies with DIN EN 60 651for Class 2 sound level meters. The microphone is available in a satin nickel or a black matt finish.
Spécifications
Micro de studio à condensateur
M 296
Structure polaire
Omnidirectionnelle
Principe de fonctionnement acoustique
Mesure des variations de pression
Sensibilité à 1 kHz
15 mV / Pa
Sélecteur de filtre coupe-bas à 90 Hz
-10 dB
Impédance nominale
150 •
Niveau équivalent
dû au bruit intrinsèque
CCIR 468-4
22 dB
DIN EN 60651
14 dB - A
Rapport Signal/bruit
(1 Pa à 1 kHz)
CCIR-mesure pondérée
72 dB
Mesure pondérée A
80 dB
Niveau SPL max pour une DHT • 0,5 %
134 dB
Avec pré-atténuation
144 dB
Plage dynamique totale
120 dB
Consommation électrique (P 48, DIN 45596, IEC 268-15)
3 mA
Connecteur de sortie
XLR 3 broches contacts plaqués-or
Poids
157 g
Dimensions (l x Ø )
156 x 21/24 mm
| Seller information : | Woodbrass |
| Place : | Nantes, France |
| Shipping : | Livraison Mondiale |
SIMILAR ITEMS
